TISKALNA ZAVORA

Bystronic Xpert 400 x 5100

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, poteza s peresom: 190 mm, hitrost vretena (min.): 41 obr/min, največja hitrost vretena: 1.800 obr/min, skupna masa: 1.920 kg, teža obdelovanca (maks.): 17 kg, najv. debelina jeklene pločevine: 32 mm, vrtilni moment: 250 Nm, višina mize: 900 mm, Used DONAU Rapid Radial Drilling Machine Type DR 32 - Fully overhauled by vaumatec in 2022 - Equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 support feet to relieve the table frame) Technical data: Drilling capacity (solid material): St 60/E335, Ø 32 mm (with feed rate 0.20 mm/rev): GG 22, Ø 45 mm Tapping capacity: St 60/E355, M26 Tapping capacity: GG22, M35 Tool holder: MT4 Column diameter: Ø 195 mm Spindle nose to table distance (min./max.): 260/660 mm Predjrn Riqopfx Agpod Table height: 900 mm Quill stroke: 190 mm Column travel: 400 mm Spindle speeds, Range I: 41-1800 rpm Feeds: 0.1-0.15-0.20-0.3 mm/rev Spindle torque: max. 250 Nm Arm travel resistance (radial): 25 N Arm travel resistance (axial): 25 N Clamping force (radial): 3500 Nm Clamping force (axial): 5500 N Feed force: 7500 N Max. permissible mass: 17 kg Max. permissible moment of inertia: 0.002176 kgm Workpiece: Max. table load: 1000 kg Center of gravity: centered on the working surface

Stanje: novo, Leto izdelave: 2025, Genie Z45/25 JDC električna zgibno-teleskopska delovna ploščad, nova, rabljena, na voljo demonstracijski stroji Prodpfxerhkp No Agpjd

Stanje: novo, Pressure 28 t Podpfogvkmrjx Agperd Stroke 180 mm Table size 300 x 550 mm Piston diameter 130 mm Working speed min. 2 m/sec Working speed max. 9.8 m/sec Return speed 20 mm/sec Max. pressure 200 bar Machine weight approx. 0.65 t Total power requirement 4 kW Space requirement approx. 1.15 x 0.75 x 1.1 m • The horizontal bending and straightening press from Profi Press is a universal hydraulic press specifically designed for bending, profiling, and straightening operations. The machine's applications vary depending on the accessories installed on the worktable, tool holder, or in the punch and pin holes. • The HB-28 model is equipped with an angle scale on the worktable for light bending work. The press can also be supplied with tools (e.g., block punches) that can be mounted on the tool holder, as well as tools that can be fitted into the punch and pin holes for a range of different operations. • The hydraulic system can be adjusted via pressure and flow control valves, which influence the pressing force and speed of the press. The press features a built-in pressure gauge. • The control panel is used for operating the press, displaying the piston stroke, and selecting between manual or automatic operation. The HB-28 model also comes with a built-in memory capable of storing up to 4 different programs. • Operation is carried out via electric foot pedals.

Stanje: novo, Cutting diameter: 300 mm Saw blade length: 3320 x 27 x 0.9 mm Table height: mm Blade speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Psdpjfg E H Tofx Agpord Machine weight: approx. 670 kg Space requirement: approx. m Functionality in CCS version: After positioning the material and closing the vices, the cutting process is initiated. The lowering of the saw arm is accomplished by its own weight, counterbalanced by a spring and regulated via a hydraulic brake cylinder. Once the cut is completed, the saw arm is manually raised to the required position for material feed. Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch prepared for padlock, switch or speed selector, emergency stop, thermal magnetic protection, 24-volt low voltage system). Electronic band tension converter with screen display. Manual vice with quick-clamping system. Base with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional). Electric coolant pump for cooling and lubrication of the saw band. Chip removal brush. Adjustable precision stops for repeated cuts of the same length. Machine designed for pallet truck transport. Bi-metal saw band for solid and profile material. Tool kit and operating instructions.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2014, laserska moč: 3.000 W, X Working Area max.: 2500 mm Y Working Area max.: 1250 mm Control: IndraMotion MTX Laser Power: 3000 Watt Standard Equipment: Machine - Coordinate guides for highly precise machining - Sturdy, easily accessible C-frame - Linear tool magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning unit with programmable hold-down - Foot pedal for closing clamps - Ball tables - 2 parts flaps, 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection Podpfowld Susx Agpord TRUMPF Laser - Solid-state laser TruDisk 3001 with 1 fiber outlet - Excitation via pump diodes - Fiber cable according to standard layout (10m) - Laser control TruControl 1000 - Cooling unit - Laser logbook function Cutting Head - Solid-state laser compact cutting unit - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down (active / passive / repositioning) - Stroke counter for punches and threads - Spray lubrication for punches - Punch slug extraction - Calculation of fill level on the punching console - Level monitoring for thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Operator panel with 17" touch display - Program management - Production planning - Integrated technology data - Remote teleservice via Internet - Programmable cutting gas pressure - Automatic shut-off with wake-up mode Data Transfer - USB interface - RJ-45 network connection Safety - CE marking - Dual-beam light barriers - Monitoring system for gas pressure, temperature, cooling water, etc. - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology - SoftPunch function - StripLine - Lowerable die - Spray lubrication die incl. fill level monitoring - Additional clamp - 4 height-adjustable clamps - Vibration-damped installation - Chip conveyor with tilting container - Blowing device for small parts - Warp detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction device - Vacuum sensors for each suction cup - Double sheet detector for double sheet check - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing for machine - Simultaneous loading and unloading during main operation - Peeling system incl. positioning aid for medium format (2500x1250) - First standard auxiliary suction package - Second standard auxiliary suction package - Unloading monitoring for laser parts GripMaster - Parts conveyor belt, punching station - Parts conveyor belt, laser station ToolMaster with 70 stations (punching mode only) - Simultaneous tool change during main operation (ToolMaster)

Leto izdelave: 1985, Stanje: rabljeno, Spindle diameter: 110 mm X-axis travel: 900 mm Y-axis travel: 600 mm Z-axis travel: 200 mm Table length: 1,020 mm Table width: 860 mm Spindle taper: MK 40 Table size approx.: 1,020 x 860 mm Table load capacity approx.: 800 kg Maximum longitudinal table travel (X): 900 mm Maximum cross ram travel (Y): 600 mm Maximum boring spindle stroke (Z): 200 mm Maximum vertical movement of cross beam (W): 635 mm Vertical clearance between table and boring spindle max.: 15 - 850 mm Distance between uprights: 950 mm Spindle diameter: 110 mm Spindle taper (internal/external): ISO 40 18 spindle speeds: 10 - 2,500 rpm Infinitely variable milling feed, table: 1 - 6,000 mm/min 4 milling feeds, boring head: 30 - 180 mm/min 6 drilling feeds: 0.01 - 0.39 mm/rev Positioning accuracy for all 3 axes (as new): 0.003 mm Rapid traverse (table / boring head slide / cross beam): 6,000 mm/min Spindle drive power: 6.2 kW Total power requirement: approx. 15 kW - 380 V - 50 Hz Predpjt Hwyxjfx Agped Machine weight: approx. 9,000 kg Accessories / Special features: - 3-axis CNC control, BOSCH MICRO 8 with monitor, program input manually, via cassette, and through interface - Digital display for Z-axis - Separate control cabinet, various tools - Oil cooler for spindle lubrication, etc.

Stanje: rabljeno, Leto izdelave: 1998, Tlak 175 t Upogibna dolžina 4050 mm Širina med stojali 3050 mm Izsod 300 mm Prsdpfxstv Rh Ae Agpsd Hod 240 mm Hitrost pomika navzdol prazno maks. 140 mm/s Delovna hitrost maks. 9 mm/s Hitrost povratka maks. 130 mm/s Razdalja miza / bat min. 370 - maks. 610 mm Krmiljenje CYBELEC DNC 880S Skupna priključna moč 15 kW Teža stroja pribl. 15 t Prostorske zahteve pribl. 5,89 x 3,6 x 3,16 m Oprema: - krmiljene osi: Y1, Y2, X, R - CNC bombiranje - Krmiljenje CYBELEC DNC 880S - zasukljivo upravljanje, spredaj desno - 4x ročno nastavljivi ustavitveni prsti - Nožni pedal - 1 komplet zgornje orodje - 1 komplet spodnje orodje - 2x držala za material spredaj - Bočna + zadnja varnostna zaščita - Navodila za uporabo

Stanje: pripravljen za uporabo (rabljen), Max. operating temperature: 1120°C, heated length: 1000 mm, cooling length: 1850 mm, channel height: 40 mm, conveyor belt width: 110 mm, throughput speed: 100–1000 mm/min, split gas consumption: 1.5–2.5 Nm³/h, control panel: Siemens SIMATIC HMI, length: 5000 mm, width: 650 mm, height: 1350 mm, with integrated ammonia cracker GSP 25 FA, integrated gassing panel, protective gas supplied from ammonia cracker (ammonia supply by customer) + N2 purge gas as required, MSR unit with Siemens PLC and touch HMI, atmosphere monitoring, process documentation, on-site inspection possible. Prsdpjq Ttz Esfx Agpjd

Stanje: novo, IMMEDIATELY AVAILABLE FROM STOCK!! Subject to prior sale. The OD tube deburring machines remove burrs from tubes after cutting. This machine simultaneously removes internal and external burrs from tubes and profiles without rotating the tube material. Round, square, rectangular, and various other tube and profile shapes are deburred within just a few seconds. Pjdpfx Agod Ixbzspord Thanks to the rotating brush, the operator does not need to rotate the tube. The tube clamping system enables precise insertion of the tubes and makes it easier for the operator to hold them during the deburring process. The removed burrs are collected in a plastic container.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 130 kg, širina na sredini: 600 mm, premer brusilnega koluta: 450 mm, skupna širina: 2.110 mm, skupna dolžina: 3.120 mm, skupna višina: 1.435 mm, premer brušenja: 350 mm, poteza s peresom: 30 mm, širina brusilnega kolesa: 50 mm, hitrost vretena za brušenje: 2.000 obr/min, skupna masa: 3.100 kg, Max. grinding diameter: Ø350 mm Max. workpiece weight: 130 kg Grinding length between centers: 600 mm Grinding spindle speed: 1,500 or 2,000 rpm (Manual belt change) Standard grinding wheel: Ø 450 x Ø127 x 50 mm Grinding wheel width: from 25 to 50 mm Z-axis travel: 750 mm X-axis travel: 265 mm Grinding spindle power: 3.7 kW Including the following standard accessories: - 120-liter coolant tank with 0.4 kW pump (200 l/min) and magnetic separator - Hydraulic tailstock - Removable splash guard - Hydraulic power unit - Standard grinding wheel Ø 450 x Ø127 x 50 mm - 1 grinding wheel flange - 1 grinding wheel flange extractor - Dressing holder with dressing diamond on tailstock Prsdoc Tnq Iopfx Agped - 2 dead centers - Dial gauge for table adjustment to 0° - Machine lamp - 3 detachable crane transport hooks - Leveling screws with base plates - Machine documentation Including the following special accessories: - Internal grinding device - Frequency inverter (Mitsubishi) for speed control at the work spindle - Frequency inverter for speed control at the grinding spindle with 5.5 kW motor, incl. display - 2-axis digital readout Heidenhain ND 780