Rezkalni stroj s pomično kolono

BUTLER-NEWALL LE 20.000

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, This Okuma MCR-A5C30x65 portal milling machine was manufactured in 2013. It features a robust 100 mm spindle with a speed of up to 4000 rpm and can accommodate a maximum workpiece size of 2540 mm x 5540 mm. On its large 2500 × 6300 mm table, the machine supports an impressive 30,000 kg. Ideal for heavy-duty milling operations with rapid traverse speeds of up to 20,000 mm/min. Contact us for further information about this machine. Machine Advantages Technical Machine Advantages • Machine dimensions (L×W×H): 2500 mm x 6600 mm x 6350 mm // Weight: 59,000 kg • Maximum workpiece width: 2540 mm // Maximum workpiece length: 5540 mm • Table size (width × length): 2500 mm × 6300 mm // Max. table load: 30,000 kg // Table height from floor: 850 mm // Effective width between columns: 3050 mm // T-slot (width × number): 24H7 × 13 • Cutting feed rate: 1 to 10,000 mm/min // Rapid traverse: 20,000 mm/min // Table movement X-axis: 6500 mm // X-axis travel: 6500 mm // Y-axis travel: 3500 mm // Z-axis travel: 650 mm • Tool holder: Type BT50 + MAS // Tool magazine capacity: 50 tools // Max. tool length: 300 mm • Power supply: 400V, 3-phase, 50Hz // Rated power: 513 kVA // Full load current: 741 A // Peak current: 117/138 A // Short circuit current: 18 kA • Spindle diameter: 100 mm // Spindle speed: 30 to 4000 rpm Ibsdox D S Ekopfx Amusb • Large table, suitable for heavy loads / Large tool magazine capacity / High rapid traverse for efficient operations.

Stanje: rabljeno, Leto izdelave: 1987, Technical details: Number of spindles: 8 Spindle bore: 51 mm Item: Multi-spindle automatic lathe Make: Schütte Model: AF51 Year of manufacture: 1987 Six-spindle automatic lathe 8 main spindles Max. nominal bore D=51mm Control system: SIEMENS SIMATIC S5 Gripper in position 7 for rear-side machining Thread cutting drive Iedpfxjiay Sfe Amusbb Independent feed in position 2/3 Electronic cam switchgear Balluff Plain text display Wöhrle Coolant booster pump Magnetic cartridge filter Oil operation Including bar feeder IEMCA PRA40/37/F, year of manufacture 1987 (bundle loader) Painted in light blue and light grey Tool configuration may differ from illustrations. Please contact us for more information and pictures via mail(at) or

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: nepreverjeno, Tukaj vam ponujamo vrtljivo mizo znamke Parkson. Model je PAR-251 R Ibjdsxtu Efepfx Amusb Premer vrtljive mize je približno 250 mm. Kontaktirajte nas za neobvezujočo ponudbo.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1996, lastna masa: 800 kg, diameter 1.5 - 160MM Ijdpfxjwgm Sao Amusbb stroke 400MM weight 800KGS tooling

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, stružna dolžina: 700 mm, potovalna razdalja osi X: 205 mm, pomik po osi Z: 700 mm, moč vretenovega motorja: 22.000 W, skupna višina: 2.800 mm, skupna dolžina: 6.000 mm, skupna širina: 3.900 mm, skupna masa: 9.800 kg, Complete machining with double spindle, upper and lower turret Kitagawa 3-jaw chuck left and right Tool holders with driven tools, both axial and radial Large jaw cabinet with inserts Ibjdoyn Em Rjpfx Amusb OGL gantry loader with approx. 10 kg load capacity Chip conveyor Paper band filtration system with pressure tank Max. turning diameter: 400mm X-axis travel: 205mm Z-axis travel: 700mm Spindle bore: 62mm Spindle speed: 6000 RPM Spindle power: 22kW Sub-spindle speed: 6000 RPM Sub-spindle through hole: 62mm Sub-spindle power: 15kW Tool changer: 16 positions Driven tool speed: 6000 RPM Lower turret positions: 16 Driven tool speed: 6000 RPM Driven tool power: 7kW Chip conveyor: yes Tool Eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is provided in good faith, however, accuracy cannot be guaranteed. Accordingly, this does not constitute representation or contract terms. We recommend that you verify all key details yourself.

Stanje: rabljeno, Leto izdelave: 1973, Spindle diameter: 130 mm X travel: 3,000 mm Y travel: 2,000 mm Ibsdpfx Amst Hwt Ssujb Total power requirement: 4.5 kW Machine weight approx.: 30 t Boring spindle diameter: 130 mm Spindle taper: SK 50 Working area: X – Column longitudinal travel: 3,000 mm Y – Spindle housing vertical travel: 2,000 mm Z – Spindle stroke: 1,000 mm Table size (lower): 3,300 x 2,400 mm Load capacity per m²: 10 t/m² Mounted table approx.: xx,000 mm Min./Max. position of working spindle above table: 770 / 2,770 mm Feed rate: 0.9 – 2,000 mm/min Rapid traverse for spindle headstock and column: 5,000 mm Quill feed: 0.5 – 1,200 mm/min Spindle speed range, partially infinitely variable: 4.5 – 1,250 rpm Machine weight: approx. 30,000 kg Accessories / Special equipment: • Heidenhain 3-axis digital readout, hardened guideways, ball screws • Infinitely variable spindle speeds and feeds, individually motorized feed drives • Operator’s traveling platform, pendulum panel control, manual hand panel, platform • Hydrostatic column displacement • Planed clamping plate 3,200 x 2,500 mm with T-slots, auxiliary table approx. 1,400 x 2,600 x 900 mm (H), one side face machined • Hydraulic clamping for column/carriage, motorized tool clamping • Extensive accessories including tool holders with and without tools • Separate chip extraction system, clamping aids, 1 clamping angle plate and plates, and much more

Leto izdelave: 1997, stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z: 1300mm/1100mm/1000mm, table size X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Spindle speed: 7000rpm, spindle power: 50HP, tool magazine: 80. Dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. An on-site inspection is possible. Ibedpotx Dn Usfx Amuob

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, potovalna razdalja osi X: 5.000 mm, pomik osi Y: 3.500 mm, pomik po osi Z: 2.350 mm, hitrost pomika os X: 13.000 m/min, hitrost podajanja osi Y: 13.000 m/min, hitrost podajanja os Z: 13.000 m/min, skupna dolžina: 12.000 mm, skupna višina: 4.800 mm, širina mize: 2.000 mm, skupna širina: 6.800 mm, dolžina mize: 2.500 mm, zmogljivost vrtanja: 180 mm, vrtljajska hitrost (min.): 2.000 obr/min, dolžina pomika os W: 1.000 mm, Table-type Boring Mill Juaristi - TS5 Ibjdpey Hq Dyefx Amujb MACH-ID 9610 Manufacturer: Juaristi Model: TS5 Control: HeidenHain iTNC530 Year of manufacture: 2009 Coolant through spindle: 20 bar Paper filter system Tool changer (ATC) with 60 positions Spindle extension: L = 550 mm Full B-axis 360,000° with ROD 880C Table load capacity: 28,000 kg X-axis travel: 5,000 mm Y-axis travel: 3,500 mm Z-axis travel: 2,350 mm W-axis travel: 1,000 mm Table length: 2,500 mm Table width: 2,000 mm Table load: 28,000 kg Spindle speed: 2,000 rpm Power: 51 kW Tool holder: 180 ISO50 ISO/BT/MK Feed rate X-axis: 13,000 mm/min Feed rate Y-axis: 13,000 mm/min Feed rate Z-axis: 13,000 mm/min Feed rate W-axis: 13,000 mm/min Tool changer: 60 positions ICS (internal coolant supply): 20 bar Number of controlled axes: 5 Length: 12,000 mm Width: 6,800 mm Height: 4,800 mm Weight: 44,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are implied. We recommend that you verify all critical details.

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 650 mm, premer struženja: 400 mm, Fanuc Oi-TD control 3-jaw chuck, diameter 250 mm 12-position turret Tailstock Chip conveyor The machine has only 4,051 power-on hours Technical data: Swing diameter: 650 mm Turning diameter: 400 mm Turning length: 650 mm Ijdpfx Aevi Haqemuebb X-axis travel: 230 mm Z-axis travel: 650 mm Max. spindle speed: 4,500 rpm Number of tool stations: 12 Spindle drive power: 11/15 kW Approx. weight: 5,400 kg Technical data, accessories, and machine description are non-binding.

Stanje: rabljeno, Leto izdelave: 2004, Technical Details: X-axis travel: 1500 mm Y-axis travel: 1000 mm Z-axis travel: 1000 mm CNC control: TNC 530 Spindle operating hours: not yet known Milling spindle speed range: 1st gear: 30 to 930 and 2nd gear: 930 to 4000 / stepless rpm Tool holder, horizontal/vertical: SK 50 (DIN 69871 / DIN 69872 Form A) Spindle torque: 1000 Nm Swiveling spindle head left and right: 90° Feed rate: 1 - 6000 mm/min Feed force: 30 kN Rapid traverse: 15 m/min Ijdpju Nc Rijfx Amuobb Number of tools: 1 pc. Table clamping area (L x W): 1600 x 800 mm Table load capacity: 40 kN Operating voltage: 400 V / 50 Hz Total power requirement: 42 kW Machine weight approx.: 15.2 t Compressed air: 6.3 bar Machine dimensions approx. (LxWxH): 3.1 x 4.7 x 2.6 m Cooling filter dimensions: 1.9 x 1.6 x 1.4 m Required floor space approx. (LxWxH): approx. 38.5 m² Applications: Milling, drilling, tapping, boring with direct encoded linear measuring systems The guides of all 3 axes are boxways Milling head positioning controlled +/-90° Internal and external coolant supply Milling spindle rated motor power: 22 kW with integrated hydraulic unit up to 100 bar operating pressure with coolant system, high-pressure pump 60 bar (internal coolant supply), nominal flow rate 20 l/min, and low-pressure pump 4 bar (external coolant supply), as well as spray gun Compact belt filter RESY REBER SYSTEMATIC GmbH, type KBF 452/710 Hinged belt chip conveyor DGS, type SSF 600 P50, year 2004 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO