Škarjasta dvižna miza BUTER 200x100 5t

buter H 50-08

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Cambio 500 debarking system consisting of: Infeed centering device. Cambio 500: Rotor opening 495 mm. Minimum log diameter 90 mm. Drive motor 55 kW. Feed motor 11 kW. Feed speed 80 m/min. Hydraulic rotor and feed rollers. Hfodswxdimspfx Adrjh Outfeed control unit. Tilting bin for long timber. Spare parts.

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), številka stroja/vozila: MBHF-KBK1, DEMAG KBK overhead crane system, crane runway dimensions approx. 12m x 3.5m Other dimensions available upon request! Load capacity / lifting capacity: 125 kg (0.125 t) Technical specifications of the system: Crane runway made of Demag KBK1 rails System will be delivered complete: KBK rails, rail connectors, trolleys, end plates, cable festoon system, power supply, brackets/suspenders, etc. Incl. 1 bridge with 125 kg Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Hodpfopiarnex Adrofh Other KBK systems with load capacities from 125 kg to 1600 kg are also available. Please enquire about your crane runway with required cantilever load and dimensions.

Leto izdelave: 2016, stanje: novo, 1 piece of factory-overhauled, unused industrial bevel helical gearbox by ASUG, TGL 21815. All gearbox components have been replaced, except for the housing! Claw coupling: 800 mm (only one half available) Maximum torque: 27,829 Nm Hsdpfogwlrdjx Adrsfh Gear ratio: i = 1:80 Maximum power: 51 kW Oil fill: 170 kg Input speed (n1): 1400 rpm Output speed (n2): 17.5 rpm Weight: 1,450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925 mm Base length: 1,170 mm !! Gearbox is supplied WITHOUT oil cooler !!

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), Volume: 1000 l, maximum temperature: 750°C, heating capacity: 40 kW, machine dimensions (L/W/H): approx. 2500 mm / 1600 mm / 1900 mm, weight: approx. 2000 kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Hedpfow Emyzex Adrefh

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 18,5 kW (25,15 KM), vrsta prenosa: hidrostat, vrsta goriva: dizel, kapaciteta rezervoarja za gorivo: 50 l, barva: rdeča, skupna masa: 2.600 kg, lastna masa: 2.500 kg, dvižna moč: 1.000 kg/m, dvižna višina: 3.310 mm, stanje pnevmatik: 100 odstotek, konfiguracija osi: 2 osi, število sedežev: 1, prostornina žlice: 0,4 m³, širina izkopne žlice: 160 mm, Leto izdelave: 2025, nosilnost: 980 kg, Oprema: dodatne luči, hidravlika, kabina, nastavljiva roka, pogon na vsa štiri kolesa, spojka prikolice, standardna žlica, vilice za palete, zapora diferenciala, zaščita za glavo, The H&R 2210-T telescopic loader with the new 3-cylinder Perkins turbo engine (18.5 kW, Mannheim, Germany) meets the Euro 5 emissions standard, even without a particulate filter. The new turbo engine is particularly fuel efficient, and with its 2-stage hydrostatic drive, it achieves a speed of approx. 16 km/h. Thanks to the large steering angle of 42° and a tight turning radius, it is highly maneuverable even in the smallest spaces. The 2210T wheel loader with telescopic arm comes standard with a quick coupler, pallet forks, and a standard bucket, allowing you to begin work immediately. With the additional hydraulic control circuit, various attachments for the yard loader can be used. The telescopic arm provides the 2210-T with excellent reach. The electric gear function on the joystick makes operating the H&R 2210T especially comfortable. H&R loaders are technically and visually optimized in-house and undergo comprehensive inspection and testing. In addition, every machine receives extensive corrosion protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. For our machines, a TÜV Süd technical report is available for obtaining an individual road operation permit in accordance with §21 StVZO (road registration / operating permit as a self-propelled work machine). Advantages of the H&R 2210T Telehandler: • Fully equipped • Efficient German-made engine (Euro 5) • Extensively optimized in-house • Extendable telescopic arm • Heated comfort cab • Includes pallet fork • Includes standard bucket (150 cm) • Joystick with float position and electric gear • Additional hydraulics for front attachments • Hydraulic oil cooler • Brake inching pedal • Reversing camera with display Hfedjul Af Depfx Adreh • Rotating beacon • LED work lights front and rear • Wide tires 31 x 15.5 -15 • Radio with MP3 and USB • Adjustable steering column and seat • Hour meter and fuel gauge • Trailer hitch • 1-year spare parts warranty • CE compliant according to the EU Machinery Directive Price: Net: €24,975.00 VAT: €4,745.25 Gross: €29,720.25 Financing available! Options: 2-year warranty: €590 TÜV road registration / operating permit (work machine): €595 Transport within Germany & Austria upon request Technical Data: Engine: 3-cylinder Perkins turbo Power: 25 HP Emission class: Euro 5 Lifting capacity: 980 kg Lifting height: 3,310 mm (lower edge, standard pallet fork) Dumping height: 2,796 mm (lower edge, standard bucket tipped) Lift/lowering time: 4.0 / 3.5 seconds Wheelbase: 1.6 m Dimensions (L x W x H): 3,710 x 1,496 x 2,340 mm Weight: 2,430 kg Tires: 31 x 15.5 -15 Accessories and spare parts are available from us. Please include your phone number with inquiries!

Stanje: rabljeno, No. 3176 WEINIG Hydromat 1000 Planing and Moulding Machine Used, year of manufacture 2007 6 Spindles: bottom-right-left-top-top-bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Finished lamella width: 4 - 15 mm Max. number of lamellae: 16 pcs Lamella lengths: 400 - 4000 mm 1st spindle horizontal bottom: Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool circle 125 - 180 mm 2nd spindle vertical right: Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm 3rd spindle vertical left: 7.5 kW, 6000 rpm Diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top: 15 kW, 6000 rpm, diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 45 mm Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle: Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment reduced to 25 mm Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle: Brake motor 30 kW, 5000 rpm Axial adjustment reduced to 25 mm Diameter 45 mm Hsdpfx Asu Agh Ssdrsfh Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm All profiling spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of feed rollers opposite left spindle, axial 35 mm Shortened roller distance opposite right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in table, lateral pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 driven, toothed rollers in outfeed table 2 driven, toothed rollers in machine table Pressure beam ahead of and discharge after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electric height adjustment of upper spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Subject to errors in description and price Transport and loading by us available as an option To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended The sale is made in "as is" condition Technical data, description of condition, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "sold as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Terms of payment: prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex site

Stanje: novo, Leto izdelave: 2025, Genie GR20 Runabout vertical mast lift, new, used, and demo machines available. Hedpforh D R Asx Adrjfh

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, 1. Block train (Blockzug) 2. Chain conveyor (Qwerfoderer) 3. Linck FWK quick clamping carriage - Gauge: 900 mm - Travel speed, forward/reverse: 80/180 m/min - Clamp opening: 750 mm - Log length: 2.5–13.5 m 4. Linck KCSU-6 saw unit - Log diameter: 120–650 mm - Drive per side: 160 kW - Max. cutting height, multi-blade: 405 mm remaining: 370 mm - Log length: 2.5–13.5 m - Max. pass-through width: 750 mm - Min./max. cutting width: 18–720 mm Hedpfxsxtwwke Adrjfh - Split wedge opening: 560 mm - Saw blade diameter: 620 mm - Limiting cutter distance: 370 mm - Net weight approx.: 15,000 kg - Feed speed, steplessly adjustable: 10–35 m/min 3. Take-off device Bm 1/Mbh 4. Sideboard cross-cut saw Linck KA 1/ACF 5. Complete hydraulic system 6. Complete electrical/control system 7. Complete circulation conveyor technology 8. Outfeed mechanisation 9. Waste removal under KCSU Year of construction: 1998. Commissioning: 2000 Various tools Sale by customer order.

Stanje: novo, Load capacity in kg: 1000 kg Reach: 4000 mm Height: 3000 mm (underside of jib) Total column height: 3790 mm Slewing range: 270 degrees Total weight: approx. 525 kg Description: - Festoon cable power supply for trolley - Drag chain, cable sag approx. 800 mm - Operation from floor using pendant control Including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, double-strand Hodsxak Hxepfx Adrofh - Painted in RAL 5017 traffic blue - Lifting capacity 1 t - Hook travel 3000 mm - Maximum hook position 2442 mm - Design basis FEM 9.901 - Mechanism group 2m / M5 - Lifting, 2-speed (pole-switchable) 1.3 / 5 m/min - Lifting power 0.22 / 0.9 kW - Duty cycle 60% ED - Switching frequency 360 c/h Overload protection The crane system complies with the requirements of Machinery Directive 2006/42/EC as well as current UVV regulations DGUV Regulation 52 (formerly BGV D6). Included: - Anchor rods L200 (set) size LS 200 - Consisting of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - For foundation anchoring, including grouting accessories For alignment of the slewing jib crane, a mounting gap between the column base and the building floor must be provided. The mounting gap is to be grouted by the customer after approx. 4 weeks of crane operation. Illustration shows a similar crane system.

Stanje: rabljeno, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal Treatment Plant / Thermal Chamber for Wood Modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on wood thickness and type. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler using thermal oil as the heat transfer medium. Technical Data: Capacity: 5,950 - 9,900 m³ of wood per year (based on 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions (LxWxH): 10,500 x 1,300 x 1,100 mm Minimum board thickness: 10 mm Power supply: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel Duplex EN 4462 Door opens hydraulically, 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, covered with 1 mm galvanized steel sheet Main Components: 1. Autoclave for heat treatment 2. Vacuum system for extracting air from the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 each side) Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Safety chimney made of stainless steel (300 mm diameter, 6,000 mm length) Function Description: Hfsdjv Si Szspfx Adrsh 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without disassembly, without transport or installation Disassembly, loading, and transport by us are possible as an option Errors in description and pricing reserved To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale takes place as is Technical data, description of condition, year of manufacture and scope of supply according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: "purchased as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location