Stroj za valjanje

Burri PM280T

Stanje: dober (rabljeno), Leto izdelave: 1997, Technically in good condition and fully operational. Year of manufacture: 1997. Ndodpfxswn Dbno Aa Iod Max. turning diameter: 250 mm. Max. diameter over bed: 530 mm. Max. turning length: 500 mm. Dimensions (L x W x H): approx. 3315 mm x 1895 mm x 1900 mm. Machine weight: approx. 6 tons.

Leto izdelave: 1962, Stanje: rabljeno, številka stroja/vozila: 1790, Manufacturer: Karl Klink Model: RW 5 Year of manufacture: 1962 Weight: approx. 2,500 kg Machine no.: 1790 General / Technical Data: Hydraulic horizontal broaching machine in good, operational condition Broaching stroke: 1,320 mm Broaching stations: 1 unit Tensile force: 5,000 kg at 3 m/min (3,000 kg at 7 m/min) Broaching tool clamping: Universal draw head for flat shanks Through-bore in clamping table: Ø 100 mm Workpiece diameter: max. 420 mm (limited by the oil and chip tray) Cutting speed: hydraulically steplessly adjustable from 1 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,600 mm x 600 mm x 1,900 mm (without work area) Power supply: 380 Volt / 50 Hz / 15A Hydraulic motor: 4 kW Accessories / Special equipment: • The machine is equipped with a universal draw head for flat shank tools • Coolant/lubrication system • No automatic tool loader included Ndodpodl Uzkjfx Aa Ied • Short oil and chip tray (approx. 900 mm) Remarks: The machine is ideal for producing keyways. Broaching needles and broaching arbors can be supplied on request. The machine is available for demonstration under power in our warehouse.

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Control: OSP-P20L-R Swing diameter over bed: 450 mm Swing diameter over cross slide: 350 mm Swing diameter over compound slide: 300 mm Spindle bore: 43 mm Spindle speed range: 75 - 3,000 rpm X-axis feed: 0.00001 - 39.37 mm/rev X-axis rapid traverse: 20 m/min Z-axis feed: 0.00004 - 38.37 mm/rev Z-axis rapid traverse: 25 m/min Tool turret: 12 stations Driven tools Tool holder: VDI30 Machine weight: approx. 3,800 kg Bar loader: BREUNING IRCO Nodovk Sqkjpfx Aa Iodd

Stanje: dober (rabljeno), Leto izdelave: 2007, stružna dolžina: 1.065 mm, premer struženja: 470 mm, Chip conveyor SMW 315 3-jaw chuck 2 x Radial driven tool holders 2 x Axial driven tool holders Spindle bore: 80 mm BMT tooling system Tool measuring probe Spindle hours: 6,960 / Operating hours: 6,270 Max. turning diameter: 470 mm X-axis travel: 260 mm Z-axis travel: 1,065 mm Spindle bore: 80 mm Spindle speed: 4,200 rpm Spindle power: 30 kW Tool changer: 12-position BMT tool system Driven tool speed: 6,000 rpm Driven tool power: 7.1 kW Length: 3,310 mm Width: 1,900 mm Height: 1,970 mm Weight: 6,100 kg Njdpfowq Rpwsx Aa Iodd

Leto izdelave: 2000, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, največja dovoljena obremenitev: 7.000 kg, delovna višina: 1.750 mm, Der Gasnitrier-Vakuumofen umfasst alle Arbeitsschritte der Gasnitrierung, Aufkohlung und Anlassen. Die Maschine befindet sich in einem sehr guten Zustand. Ndjdpfx Aaju T N Efs Isd

Leto izdelave: 2021, Stanje: novo, Type: Gas-fired with central recuperator Max. temperature: 1,300°C Max. furnace throughput: approx. 700 kg/h Nsdpfsg E S Inex Aa Ijdd Clear door opening (W x H): 600 x 400 mm Number of burners: 6 Number of control zones: 3 Heating capacity: 720 kW Total electrical connected load: approx. 15 kVA PLC: Siemens S7

Stanje: dober (rabljeno), Leto izdelave: 2004, TBT ML 200-2-800 Deep Hole Drilling Machine TECHNICAL DATA Type: ML 200-2-800 Year of manufacture: 2004 Control: Simatic OP17 Number of spindles: 2 Spindle distance: 12 mm Drill slide stroke: 800 mm Drilling range: 1 – 10 mm Method: Single-lip drill Drilling depth: Plunging spindle: 110 mm Sealing housing: 430 mm Sealing housing with steady rest: 400 mm Spindle drive: Power: 1.7 / 2.9 / 1.3 kW Voltage: 240 / 350 / 350 V Frequency: 100 – 800 Hz Weight: Approx. 2.6 t Nedpfevcbg Sjx Aa Iedd We do not assume any liability for the correctness, completeness, or currentness of the information provided.

Leto izdelave: 1985, Stanje: dober (rabljeno), številka stroja/vozila: 04.2187, Hydraulic Internal Broaching Machine in Nodpfx Aeixntwoa Isdd Good Working Condition Manufacturer: Arthur Klink Year of Manufacture: 1985, refurbished Weight: 2 t Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Tensile Force: 10,000 kg at 3 m/min Broaching Speeds: hydraulically variable from 1 m/min to 7 m/min Return Speed: hydraulically variable from 7 m/min to 30 m/min Maximum Stroke: 1200 mm Broaching Tool Clamping: universal pull head for flat shanks up to 26 mm width Maximum Workpiece Diameter: Ø max. 480 mm (limited by oil and chip tray) Table Bore: Ø 70 mm Power Supply: 380 Volt / 50 Hz / 5 kW

Stanje: rabljeno, Leto izdelave: 2001, Krmiljenje SIEMENS Površina mize 160 mm Teža stroja pribl. 10 t Nodpeudc S Tefx Aa Ijdd Nazivni premer obdelovanca 130 mm Nazivni modul 3 mm Maksimalni aksialni pomik 250 mm Kot vrtenja rezalne glave Najvišje število obratov delovnega vretena 1000 obr/min Maksimalni premer delovne plošče 80 mm Maksimalna dolžina plošče/skupna dolžina 170/2 mm Maksimalni pomik plošče 170 mm Maksimalna hitrost plošče 3000 obr/min

Leto izdelave: 1994, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of manufacture: fully refurbished by the manufacturer in 1994 Weight: 3,700 kg Tensile force: 10,000 kg (100 kN) Nedpfx Asgyd T Eea Iedd Max. stroke: 1,500 mm Max. workpiece diameter: Ø 500 mm Broaching speeds: steplessly adjustable from 1 m/min up to 6 m/min Return speed: steplessly adjustable up to 20 m/min Power supply: 400V / 50Hz