Poševna žaga

Brevetti Junior 250

Stanje: zelo dobro (rabljeno), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG transverse conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG accelerator model 814 Short infeed table with heavy-duty 4-roller feed Planing moulder with reinforced KASCHWIG three-sided soundproof cabin • Maximum working width: 230 mm • Maximum working height: 160 mm • Electronic feed, frequency-controlled, 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (4-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/stop combination • Pneumatically assisted top pressure rollers Lsdpewvqklsfx Ahueac • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted lateral pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing switch cabinet • Operating manual, spare parts list, and circuit diagram included • Machine without planing heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 KG Factory-new WEINIG parts used: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors newly mounted NEW electronic motor soft start / braking units NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS installed in the machine Condition: see attached photos – technically in top condition Infeed mechanization unrefurbished – all parts present – operational Payment: Prior to loading, net cash Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Subject to prior sale and errors excepted.

Stanje: novo, Leto izdelave: 2026, 10T Ramp, Usable Internal Width 1.7 m – TM-GROUP, the Best Choice on the Market ✅ Specification: - Manufacturer: TM-GROUP - Maximum Load Capacity: 10 tons - Internal Width of Ramp: 1700 mm - Reinforced side railings on both sides Lsdpfx Aswa Nr Nshuoac - Ramp rollers for easy repositioning - Central handle for positioning with a forklift - Adjustable incline angle and flap height - Reinforced ramp supports on both sides - Moving parts equipped with grease nipples - Ramp additionally equipped with a winch - ELECTRIC as well as manual ramp height adjustment ✅ Drive-on Grating: Grating with anti-slip grooves. Secure and stable surface. Both forklifts and pedestrians benefit from excellent traction and stability. Competitors typically offer ramps made from sheet metal with mesh overlays. Our product uses grooved grating – a much more durable solution that ensures debris under the wheels does not remain on the ramp and the forklift does not slip. ✅ Forklift Mount – dual-sided installation: Practical and quick mounting for forklifts allows transport of the ramp in any direction. The specially developed handle also enables precise maneuvering in confined spaces. ✅ Chain for Securing to Truck, Railcar, or Fixed Warehouse Ramp: A heavy-duty steel chain provides added safety and prevents the ramp from slipping during loading and unloading. ✅ Sturdy Side Railings: Safety railings that can be removed and replaced with a frame/roof (roof optional). ✅ Electric Height Adjustment: Smooth electro-hydraulic drive with a high-quality pump. Requires only 230V – can be connected to any standard socket. ✅ Dual-Sided Hand Pump: Hydraulic pump for height adjustment when no power supply is available – lifting function on both sides. Ideal solution for use in any conditions. ⭐️ Available Versions: ⭐️ Ramp widths: 1700 mm, 2000 mm, and 2500 mm – Standard, Premium, and Premium Plus Mobile ramps with load capacities of 10, 15, 20, and 25 tons Grating thicknesses: 3 – 5 cm Colors: Red, Blue, Black, and Green (special colors upon request) Mobile ramp with tarpaulin As a manufacturer, we offer custom-made solutions according to individual requirements – in various sizes, load capacities, and variants. Need a tailor-made solution you can’t find anywhere else? Contact our specialist! Keywords: Loading ramp, unloading ramp, drive-on ramp, mobile ramp, loading station, transfer ramp, mobile loading ramp, mobile drive-on ramp.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 9.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3284, Standardna različica RUF Lignum R2 z izstopnimi kanali, el. motor 22 kW, velikost briket 150x60 mm, zmogljivost do 500 kg/h Lsdeyyl Sropfx Ahueac

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 1.670 mm, pomik po osi Z: 500 mm, število osi: 4, This 4-axis CNC machining center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1,000–24,000 rpm and C-axis rotation from 0–360°. The machine is equipped with a linear tool changer with 12 positions and a comprehensive drilling head with 16 spindles. In addition, it has a robust safety system with light curtain. Take advantage of this opportunity and purchase this CNC machining center Felder Format 4 Profit H 200. Contact us for further information about this machine. • Automatic central lubrication • Working area: X 3300 mm / Y 1280 mm / Z 250 mm (clearance height from console level depending on clamping system) • Operator terminal on the left side of the machine • Handheld terminal with axis speed control and emergency stop • Software: Woodflash (CNC panel, tool database, program editor) • Position display for workpiece support and vacuum suction pads Ljdpfjx D D Hmsx Ahueac • Vacuum connection for template routing (left side), connection diameter 12 mm • Vacuum pump: 1x, total suction capacity 90 m³/h @ 50 Hz or 108 m³/h @ 60 Hz • Milling spindle: 12 kW (S6), HSK F63, 1,000–24,000 rpm, full rated power at ~12,000 rpm, air-cooled; C-axis 0–360° • Tool changer: 12-position linear on the left side of the machine frame, including storage for aggregates; max. tool diameter 250 mm; max. tool length 240 mm • Drilling head DH 16 4H 2S: 12 vertical spindles (7X / 5Y); 4 horizontal spindles (2X / 2Y); pre-stroke 70 mm; drilling depth 70 mm; shank diameter 10 mm • Grooving saws: 2 (one X, one Y); max. blade diameter 120 mm; max. thickness 5 mm; continuously adjustable speed up to 7,500 rpm • Safety: Front light curtain system

Stanje: novo, Leto izdelave: 2024, Pila za sekanje drva za kurjavo: TRV 1200L in TRV 1600L TRV 1200L Ø550: Učinkovitost in Hitrost za Neprekinjeno Rezanje Optimizirajte upravljanje z odpadki in spremenite ostanke obdelave v takojšnjo ekonomsko vrednost! TRV 1200L Ø550, zahvaljujoč svojemu naprednemu dizajnu, je idealna rešitev za žage, ki morajo obvladovati velike količine ostankov večplastnih in stranskih kosov debel. Rezultat? Neprekinjeno in avtomatizirano odstranjevanje odpadkov, ki jih pretvori v kakovostno kurilno drvo. Glavne značilnosti: Ljdov Ip T Ropfx Ahueac Poenostavljeno upravljanje: Neredno nalaganje ostankov in odpadkov na pas z nizko obrabo / valji VV. Pametni zaklepni sistem: Inovativen sistem omogoča obdelavo kosov različnih oblik in debelin, ki so prekrivni. Napreden nadzor natančnosti: Avtomatiziran sistem rezanja PLC z začasnim nadzorom dolžine kosov. Neodvisni sektorji: Opremljen je z 5 sektorji, vsak z neodvisnim pnevmatskim valjem in blažilniki za največjo stabilnost. Povečana varnost: Napreden zaščitni sistem: Vrata za dostop do premikajočih se delov z varnostnim mikrostikalom in prisilnim zaklepanjem. Varnostni ključ, ki se ne more kopirati za izključen dostop. Zaščitni tunel z varnostnim ključem in ojačana zaščita rezila za višjo raven zaščite. Motor rezila s hitrim zaustavitvijo (

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.150 mm, skupna širina: 1.000 mm, skupna višina: 1.550 mm, vrsta vhodnega toka: trifazni, skupna masa: 700 kg, teža obdelovanca (maks.): 500 kg, vhodna napetost: 400 V, hitrost pomika os X: 30 m/min, širina transportnega traku: 400 mm, moč: 2 kW (2,72 KM), vhodna frekvenca: 50 Hz, SA250 or SA380 profile sanding machine for glazing bars, boards, beams and more. The SA380 brush sanding machine offers the following advantages: 1. Flexible: Handles all profiles including beams up to 400mm wide and 260mm high 2. Mobile: Mounted on wheels and can optionally be equipped with a mobile extraction unit 3. Powerful: Automatic feed speed of 13–30 m/min ensures high throughput 4. Superior results: 8-axis system with flexible Fladder brushes delivers excellent finishing: 4 brushes sand WITH and 4 sand AGAINST the feed direction (4 sides, 2 per side) 5. Safe: Fully enclosed construction, requiring only a single 120mm extraction connection. Lasdpfx Ahsw Av Iveusc The SA250 and SA380 models are extremely robust and manufactured entirely in Denmark. We currently have two demonstration machines in stock.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1981, WEINIG Hydromat H25R, ser. št. 2603-624, letnik 1981 z pohodno zvočno zaščitno kabino KASCHWIG – SKORAJ NOVA iz leta 2017 • Kratka dovajalna miza s težkim 6-valjnim podajalnikom Ledpfx Ahotkt Tpoujac 1. Vreteno spodaj 11,0 kW 2. Vreteno desno 11,0 kW 3. Vreteno levo 11,0 kW 4. Vreteno zgoraj 15,0 kW 5. Vreteno spodaj 11,0 kW 6. Vreteno spodaj 11,0 kW • Hidravlični podajalnik 6-60 m/min. • Podajalni motor 22,0 kW • 4 x pogonski mizni valji • Premer vretena 50 mm • Avtomatsko mazanje mize • Vreteno 1 + 4 + 5 + 6 z nasprotnim ležajem • Vreteno 1 + 4 z direktnim ravnalom • Podajalni valji 170 mm • 4 kosi hidro skobeljnih glav 150 mm • 6 kosov hidro skobeljnih glav 250 mm • Odsesovalni nastavek nad strojem

Leto izdelave: 2019, stanje: kot nova (razstavni stroj), Aluminium flat belt conveyor including 4 suspension points Dimensions: 6000 + 520 x 105mm Belt width: 400mm Lodpfx Ahjd Ra Tteusac PVC conveyor belt including cleats and wave edge * Optionally available with a magnetic tail pulley at the end of the conveyor belt. * Optionally available with subframe. * Custom-made versions in all configurations possible.

Stanje: dober (rabljeno), Koda: 0323 Blagovna znamka: SML - ITALIJA Model: SILVER P 35/EL - CE standard Elektronska dvoglava kotna žaga za rezanje lesa, okvirjev, PVC, aluminija, plastike in različnih materialov – CE standard. Lsdpfx Astu Hy Eehujac Tehnični podatki: - Olio-pnevmatsko spuščanje žagine glave - Največja dolžina reza: 5200 mm - Najmanjša dolžina reza: 50 mm - Višina reza: 100 mm - Največja širina reza: 170 mm - Premer žaginega lista: 350 mm, izvrtina 30 mm - Motor: 3 KM vsak, 3000 vrt/min - Elektronski programator za pozicioniranje žagine glave - Bimanualni nadzor spuščanja žaginega lista - Pnevmatska pritrditev obdelovanca - 2 odsesovalna priključka, premer 60 mm - Obratovalni tlak: 7 bar - Skupne dimenzije (DxŠxV): 6300 x 1000 x 1600 mm - Teža: 1100 kg

Stanje: dober (rabljeno), Leto izdelave: 2000, Weinig High Mech E6 vnos + A5 iznos + zlagalnik 1. Weinig valjčni transportni trak za dovod paketov. 2. Weinig nagibni sistem za pakete. 3. Weinig prečni transportni trak z ravno verigo in enojnim podajalnikom desk. 4. Weinig sortirna enota za izločanje z valjčnimi tirnicami. 5. Weinig EM814 dovedna enota za skobeljni stroj z ravno verigo za podajanje. 6. Weinig izhodni pasovni pospeševalni transporter, dolžine 3 m. 7. Valjčni transportni trak s prečnimi potisniki na verigi. 8. Weinig prečni pasovni transportni trak z zalogovnikom. 9. Weinig zlagalnik z ravno verigo in dvižno škarjasto valjčno progo. 10. Weinig izhodni valjčni transportni trakovi za pakete. Možna dodatna ponudba z dodatnim Weinig vezalnim sistemom po potrebi. Lsdpewgbw Rjfx Ahuoac