Mehanske škarje

Bombled 9G - 2500 mm x 4 mm

Stanje: rabljeno, Leto izdelave: 1980, številka stroja/vozila: A-07/471A, Sheet width - max.: 130 mm Straightening roller diameter: 40 mm Number of straightening rollers: 5 Feed rollers: 2+2 Sheet thickness - min.: 0.4 mm Sheet thickness - max.: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6x0.65x1.15 m Gedpfjcxxx Rjx Agyjbi Strip straightening machine with integrated infinitely variable VARI drive, forward and reverse operation, mode selector switch for manual and automatic operation, entry roller basket, position display of the straightening rollers via analog display, adjustment of straightening roller positions via handwheels, automatic loop control, very good condition

Leto izdelave: 1976, stanje: dober (rabljeno), Bandwidth: 300 - 1,350 mm Strip thickness: 0.35 - 3 mm Gbsdpfx Aobh Ubwjgyji Coil weight: 12.5 t Mandrel Ø: 508 mm

Leto izdelave: 1971, stanje: dober (rabljeno), Decoiler – expanding mandrel decoiler with coil lifting table Strip width: 1,200 mm Strip thickness: 0.3 – 5 mm Coil weight: 10 t Gbedpfx Ajd Ha E Sogysi Mandrel Ø: 508 mm

Leto izdelave: 1980, stanje: rabljeno, Pressure: 80 t Outreach: – mm Stroke: 50 mm Table size: 875 x 695 mm Ram area: 350 x 355 mm Ram adjustment: 71 mm Strokes per minute: 30–90 spm Gap between uprights: 450 mm Machine weight approx.: 6.2 t Gjdpfxedlcy He Agysbi Space requirement approx.: 2.0 x 2.1 x 3.2 m Installation height (stroke bottom, ram adjustment top): 480 mm Further information: - The machine is currently undergoing partial overhaul - The machine has been newly equipped with the following components: * Free-standing control cabinet with touchscreen incl. cabling * New paint finish of individual components when dismantled After the partial overhaul, the machine is safe for manual loading operation at open tooling; prior to delivery, a current UVV safety inspection and brake time measurement will be performed.

Stanje: rabljeno, Sheet width: 250 mm Coil outer diameter: 1400 mm Load capacity: 2500 kg Sheet thickness: 2 ... 4 mm Straightening speed: 2.5 ... 15 m/min Decoiler: expansion range in mm Total power requirement: 1 + 4 kW Machine weight: approx. 1.8 t Gbjdjfn Aqmjpfx Agyji Space requirement: approx. [missing data] Decoiler MHR 250/4: Max. coil diameter: 1400 mm Inner coil diameter: 450 - 530 mm Unbraked decoiler with hold-down roller Straightening machine MR 250/4: Strip entry height: 1250 mm The system has been dismantled, tested, and newly painted.

Stanje: zelo dobro (rabljeno), Capacity: 2000 x 4 Dimensions: 3000 x 2000 Rear sheet follower Gbedpfxouml R Ej Agyoi

Stanje: rabljeno, A well-maintained used guillotine shear by Vöest Alpine Cutting length: 2010 mm Cutting capacity in steel up to 370 N/mm² tensile strength: 5 mm Strokes per minute: 50 spm Hold-down pressure: 30 bar Gbodpfx Agepgmpdoyoi Number of hold-downs: 8 pcs. Manual backgauge adjustment: 950 mm Throat depth: 150 mm Dimensions (LxWxH): 280x190x140 cm Weight: 2500 kg

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, število ravnalnih valjev: 7, teža tuljave: 4.000 kg, zunanji premer tuljave: 1.500 mm, število podajalnih valjev: 2, premer ravnalnega valja: 80 mm, širina tuljave: 600 mm, Decoiler Type: MS 4000 Coil weight: max. 4,000 kg Strip width: max. 600 mm Coil diameter: max. 1,500 mm Expansion range: 475 – 535 mm Features: • Hydraulic expansion • Hydraulic hold-down arm from above with hydraulically driven roller • Swivel-in limit roller at the front, support disk at the rear, plus 3 individually attachable limit arms • Electrically driven decoiler mandrel, controlled by light sensor • Decoiler movable by hydraulic system • Coil lifting table Straightening Machine Type: MR 58 Strip width: max. 600 mm Strip thickness: 0.8 – 3.6 mm for a material strength of 400 N/mm² Number of straightening rollers: 7 pcs., supported Number of feed rollers: 2 pcs. Roller diameter: Ø 80 mm Speed: 5 – 30 m/min Features: Gbjdpoq A Tw Rofx Agyei • Rollers hardened and ground • Pneumatically liftable feed roller • Straightening rollers adjustable as a block • Lateral strip guidance at machine inlet, adjustable manually via handwheel • Hydraulic strip feeding aid (support table, extendable tongue, and upper hold-down roller) • Tiltable straightening head • Ultrasonic sensor for loop control • Swiveling control panel • Siemens S7-200 control

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: SÇ 542 Alüminyum Kopya Freze Makinası Yüksek Frekanslı, • Complies with CE standards • Used for processing of all profiles, such as arm, lock, etc. Gedpsra Nr Rofx Agysbi • Operates smoothly with advanced technology motor support. • Offers burr-free and efficient machining speed. • Equipped with a water cooling system. • Features a pneumatic profile clamping system. • High-frequency motor (18,000 rpm) OPTION • Right-hand conveyor system (1 meter)

Leto izdelave: 1989, stanje: rabljeno, Sheet width: 100 mm Coil outer diameter: 800 mm Load capacity: 150 kg Speed: 0 - 60 m/min Total power requirement: 2 kW Machine weight: approx. t Space requirements: approx. 2.89 x 1.38 x 1.4 m Load capacity: 2 x 150 kg Strip width: 100 mm Expansion range: min. 170 mm, max. 540 mm Coil rewinding system with 3 single-coil decoilers, Type 150.2: - Coil width: 140 mm - Expansion: bolt expansion, manual - Coil outer diameter: 800 mm Gjdpfsb U Hwwjx Agyebi - Brake: pneumatic disc brake - Lateral adjustment: manual with spindle Recoiler, Type 150.1: - Brake: motor brake - Lateral adjustment: manual with spindle