FGT Graphic Machinery-DIE-CUTTING STREET

BOGRAMA DIE-CUTTING STREET

Leto izdelave: 2006, Stanje: rabljeno, Cross Stacker Gaemmerler KL 540 with integrated Interlocking Device VM 500 The KL 540 cross stacker operates with the proven LiftPack technology. The KL 540 is used for package heights up to 300 mm. Condition: cleaned and fully functional Technical Data: Cycle time: ≥ 1.5 sec (depending on product) ≥ 1.2 sec with servo pusher (depending on product) Number of pages: 4 – 96 (heatset / gravure printing) Formats: A: 105 – 330 mm (105 – 310 mm with longitudinal pusher) B: 140 – 500 mm D: max. 560 mm Layer height: max. 200 mm Stack height: max. 300 mm Weight: approx. 1,500 kg Interlocking Device Gaemmerler VM500 Cycle time: (approx. 6.7 sec) per package with a package height of 300 mm and an interlocking time of 2 sec. The cycle time per package increases if the interlocking time is extended or the package height is reduced. The cycle time is also significantly influenced by the discharge speed of the cross stacker and thus by the product (surface, format). Formats: Width: 140 to 500 mm (5.5" to 19.7") Length: 105 to 330 mm (4.13" to 13") Stack height: 55 to 400 mm (2.16" to 15.7") Nsdpfxjh Nrh Uo Ab Njli Infeed height: 890 mm (35") Discharge height: 890 mm (35") Connection rating: 16A (2KW, 380/480 Volt, 3 phase, neutral) Air requirement: 1000 standard l/min, 6 bar; oil-free, dry air Weight: approx. 500 kg

Leto izdelave: 2025, Stanje: novo, PÓŁAUTOMATYCZNA MASZYNA DO KLEJENIA MODEL: MAGRAFKA-100 ROK: 2025 Nedsgnlv Dopfx Ab Noli

Stanje: dober (rabljeno),

Stanje: nepreverjeno (rabljeno), Hydraulic press for compacting paper and similar materials. The machine was in working condition prior to disassembly. Press dimensions: Length: 4,850 mm, width: 1,370 mm, height: 3,000 mm (can be reduced to 2,300 mm). Weight approx. 3,500 - 4,000 kg. For further information, please contact: +48 539 660 495. Njdpfxsh Nyfyo Ab Nsli

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, MBO K 800.2/6 SKTL AUT with pallet feeder and including ASP 66 ME delivery section Parallel fold with automated pocket (6 units) and roller adjustment MBO knife shaft cassette Cross and third fold with pneumatic knife control + pocket is fully automated (can be rotated 180° with just a few simple steps) Knife folding unit with rotatable third-fold knife LEFT and RIGHT plus Nledpfx Aerwzmwjb Nji Parallel folding pocket in the knife folding unit on both RIGHT and LEFT The main computer including touch-screen display was renewed in 2022!

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 894126H, Condition: Very good condition // completely overhauled – new heating system Nodpfx Ajrigyzsb Nsli Additional MACHINES / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST

Stanje: pripravljen za uporabo (rabljen), Max. operating overpressure: 11 bar, motor speed: 2945 rpm, rated power: 30 kW, operating hours counter: 67,212 h. Njdpfx Abjl Eyq Re Noli

Leto izdelave: 2014, Stanje: dober (rabljeno),

Stanje: zelo dobro (rabljeno), Volt: 220–240 VAC // Current: 1.8 A // Frequency: 50/60 Hz // Phase: 1 // Power: 0.4 kW WITH OUTFEED CONVEYOR Nsdpfxsh Eibae Ab Njli Diverter Belts: For envelope format 10.5 x 14.8 cm and for portrait orientation, the diverter belts should be pushed toward the central transport belt. Rule: For large envelopes, push the diverter belts outward; for small envelopes, push the diverter belts (22) inward. CONNECTION TO THE PRINTING MACHINE The STENZ FEEDER does not require synchronization. Position the feeder using the handles into the printing machine, and set the required height with the hand crank. Important: Only after setting the printing height should you lock the rear rollers and check the stability. Switch on the machine and commence printing. For single-sheet feeder printing machines (GTO): adjustable tilt. Trouble-free envelope printing can begin. Developed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 printing machines, regardless of feeder system (overlapping / single-sheet feed). – Does not require mechanical modifications to the press – No synchronization adjustments required due to laser technology – Very short setup time enables economical operation from just 1,000 envelopes – Simple operation – The feeder’s design ensures forced overlapping. The throughput of the Stenz Feeder is therefore unrestricted – Minimal wear parts for extremely long service life – Already certified for use in thousands of different printing machines – A Swiss quality product – Designed by printers for printers. Specifications: Speed: Limited by the printing machine Length: 115 cm Width: 50 cm Height: adjustable Max. format size: 36.5 x 35 cm Max. feed width: 36.5 cm Electrical: 230 V, 50 Hz

Stanje: pripravljen za uporabo (rabljen),