Kompresor

Boge CL 7

Leto izdelave: 2000, stanje: rabljeno, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control system: WENZEL WPC 2040/FW31.351 Total power requirement: kW Machine weight approx. 5500 kg Required space approx. m WENZEL CNC-controlled vertical 3-D coordinate measuring machine Model: LH 108 CNC Year of manufacture: 2000 (continuously serviced and calibrated by manufacturer) Y-axis as longitudinally movable measuring portal: 1,600 mm X-axis as transverse measuring head carriage: 1,000 mm Z-axis as vertical measuring spindle: approx. 800 mm Max. workpiece weight / table load: approx. 2,250 kg Clearance under measuring portal: approx. 900/1000 mm Overall table size: approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table plate thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special Equipment / Accessories: • Measuring table, crossbeam, and spindle made of dark natural hard stone; table with 6 x 9 threaded holes for securing workpieces/fixtures • All axes are air-bearing, making them easy to operate, virtually wear-free, and equipped with incremental linear scales with a resolution of 0.0005 mm • WENZEL CNC control unit Type WPC 2040 / FW31.351 built into the workstation (Control system was replaced approx. 3 years ago) • WENZEL measuring software Type METROSOFT QUARTIS R 12 SP 1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatic indexing in 7.5° steps) with measuring probe Model PH 10 M Plus and measuring probe TP 20 plus various probe accessories • RENISHAW Probe Head Controller Type PHC 10 C-3 Plus, also integrated into the workstation • Automatic probe change possible, 6-position probe magazine Model MCR 20 mounted on the table • Mobile hand control panel with progressive control lever (joystick) for manual adjustment of all 3 axes with continuously adjustable travel speeds • Reference sphere for setup on the table, workstation, various clamping devices, etc. Condition: Very good – can be inspected under power in stock, ready for demonstration, was professionally disassembled by a measuring machine specialist at previous owner and reassembled at current location. Delivery: Ex stock – as is and as inspected Payment: Net – upon receipt of invoice. Isdpfxot Hw Nyj Adkeap

Leto izdelave: 2009, stanje: delavnici obnovljeno (rabljeno), številka stroja/vozila: FARO-PT08, Well-maintained Faro Platinum measuring arm with 7 axes Iodpfx Adolwktpokeap Measuring arm length: 8ft (approx. 2.4m) Accuracy: 30 / 43µm Last calibration: 2012 Includes new Aberlink 3D software (free updates) Windows 10 HP notebook (used) Optionally available with Inca Premium software (+ € 4,000) or other options (Polyworks, PcDmis, MCosmos, etc.) Measuring plate 1500x1000 available on request Software training available upon request

Stanje: rabljeno, Leto izdelave: 2000, Table length 1160 mm Table width 710 mm Clearance 650 mm Control system WENZEL ME 5007 Total power requirement kW Machine weight approx. 800 kg Space requirements approx. m W E N Z E L CNC-controlled vertical 3-D coordinate measuring machine Type LH 54 CNC, year of manufacture 2000 - Continuously maintained and calibrated by the manufacturer Y-axis: longitudinally traversing measuring bridge 600 mm X-axis: crosswise measuring head slide 500 mm Ijdst Hw S Iopfx Adkoap Z-axis: vertical measuring quill approx. 400 mm Max. workpiece weight / table load approx. 200 kg Clearance under measuring bridge approx. 650 mm Usable total table size approx. 1,160 x 710 x 160 mm Table height above floor approx. 850 mm Machine height approx. 2,300 mm Weight approx. 800 kg Special equipment / accessories: • Machine delivered with increased accuracy • Measuring table, bridge, and quill made of dark natural hard stone, table with 3 x 4 threaded holes for fixture/workpiece mounting • All axes are air-bearing, enabling smooth and virtually wear-free operation, equipped with incremental scales with 0.0005 mm resolution. • WENZEL CNC control system type ME 5007 for 3 to 6 axes, equipped with ME 4700 portable manual control panel with 2 joysticks for activating all software functions – ideally set up for: • WENZEL measuring software type METROLOG – II Level 2 for measuring regular geometry, graphic 3D workpiece visualization, graphical protocols, etc. including keyboard • RENISHAW control unit model PHC 10 – 2 suitable for • RENISHAW motor-driven rotary and swivel head (automatically indexable in 7.5° steps), model PH 10 T with 5-way probe system model TP 200 with various probe accessories, incl. RENISHAW probe interface PI 200 Automatic probe change possible; 6-position probe magazine model SCR 200 mounted on the table • Reference sphere for mounting on the table, working table with console, various clamping devices • Various cassette tapes and CDs with different software. Separate PC for measuring software and printer Condition: Very good – in stock, can be inspected under power, ready for demonstration, dismantled by a coordinate measuring machine specialist at the seller and reassembled here. Delivery: Ex stock – as is and as inspected Payment: Net – upon receipt of invoice.

Leto izdelave: 2009, stanje: delavnici obnovljeno (rabljeno), Well-maintained Faro Platinum measuring arm with 7 axes Measuring arm length: 12ft (approx. 3.7 m) Accuracy: 73 / 103 µm Last calibration: 2018 Includes new Aberlink 3D software (free updates) Windows 10 PC or notebook (used) Optional: with Inca Premium software (+ €4,000) Iaedpfx Aopqx Hhodksp or others (Polyworks, PcDmis, MCosmos etc.) Measuring plate 1500 x 1000 available on request Software training as required

Stanje: novo, Screw compressor with refrigerant dryer Belt-driven. Space-saving. Cost-effective. Easy operation thanks to Infologic² Basic control system. Efficient compressor stage. Perfect solution for industrial and craft enterprises. Convincing compressed air quality. Detailed features: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Controller: Infologic² Basic control unit Refrigerant dryer: Integrated, refrigerant R513A Receiver: Horizontal, painted, manufactured according to AD2000 Performance data: Iedpfewm Ih Aox Adksap Free air delivery at operating pressure 9.5 bar: 0.98 m³/min Operating pressure min. / max.: 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 9.6 kW Motor nominal power; IP55: 7.5 kW Oil quantity: 3.2 liters Pressure dew point of dryer (20°C 100% RH): approx. +3 °C Installation data: Ambient conditions min. / max.: 1 / 46 °C Δ T over cooling medium temperature: 2 °C Cooling air requirement: 756 m³/h Free fan pressure: 30 Pa Sound level: 68 dB(A) Voltage / PH / Frequency: 400 / 3 / 50 V / Ph / Hz Dryer power rating (230V/50Hz): 0.27 kW Dimensions and weight: Length x Width x Height: 1540 x 665 x 1350 mm Weight: 240 kg Compressed air outlet: G 1/2" female thread Air receiver volume: 270 liters INCLUDED OPTION: Aftercooler C43 MINI (reduces condensate formation to a minimum)

Leto izdelave: 2019, stanje: kot nova (razstavni stroj), Complete installation - available immediately Powder booth KPZ-4 PSN Automatic washing system (2 zones) Ijdpfsfnuklex Adksap Gas oven with recirculation SGS-80O Manual overhead conveyor Price from €99,999.00 net

Stanje: novo, Leto izdelave: 2022, Shredding Machine 630 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 30 concave pieces, multiple reversible Rotor diameter: 260 mm Rotor design: EcoRings Control system: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Ijdeku Abiopfx Adkeap Filling volume: approx. 0.6 m³ Screen perforation: 10 - 12 mm Extraction nozzle Ø 160 mm

Stanje: novo, Leto izdelave: 2026, NEW TO THE POLISH MARKET Screw Compressor 230 V CORMAK screw compressors are a guarantee of quality and reliability. Our decades of experience in compressor sales have allowed us to create models that offer an excellent price-to-performance ratio. The model presented here is perfectly suited for small workshops or small manufacturing businesses. It features high output (380 l/min) for its compact size, enabling simultaneous operation of several devices. Its very low noise level (60 dB) makes it comfortable to be in the same room while operating. Thanks to high-quality components, the compressor is adapted for continuous operation and can be used in industrial environments. CORMAK Screw Compressors: When you demand top quality and performance! Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, designed for the most demanding applications. Innovative design: Our compressors are based on advanced engineering and European precision manufacturing. The robust design, enhanced with modern components, guarantees long-lasting and trouble-free operation in all conditions. Optimized efficiency: Thanks to inverter technology and intelligent algorithms, the LUFT 400 dynamically adjusts energy consumption to the actual compressed air demand. This means significantly lower operating costs while maintaining maximum performance. Proven drive system: The LUFT 400 compressor utilizes a reliable direct drive system, minimizing stress on the screw block and motor, ensuring efficient operation and extended service life. Quiet operation and comfort: Designed with attention to detail, our compressors are distinguished by an exceptionally low noise level. Effective sound and vibration damping systems provide a comfortable work environment, enhancing concentration and operator well-being. Smart control: The intuitive electronic control panel from the MAM series is the command center for your compressor. It allows precise monitoring of parameters, scheduling maintenance, and rapid diagnostics—ensuring stability and protection of key components. Tailored to your needs: We understand that every application is unique. CORMAK compressors can be configured with additional air treatment systems, perfectly matching the specific requirements of your industry. Dynamic working pressure: Automatic pressure regulation ensures that the compressor delivers precisely the amount of compressed air needed at any given time, maximizing energy efficiency and minimizing losses. Sustainable development: We focus on environmentally friendly solutions. The energy-saving technologies used in our compressors not only reduce your bills but also minimize environmental impact. The heat recovery option allows for maximum energy utilization. Technical specifications: Motor power: 3.0 kW / 4 HP Voltage: 230V/50Hz Capacity 0-6 bar: avg. 400 L/min Capacity at 6 bar: 390 L/min Capacity at 8 bar: 380 L/min Capacity at 10 bar: 380 L/min Discharge port diameter (G): 1/2" Dimensions: 800 x 520 x 740 mm Iasdpfxjtz S H Nj Adkep Weight: 95 kg Manufacturer: Cormak

Stanje: dober (rabljeno), Leto izdelave: 2014, moč: 14,8 kW (20,12 KM), volumenski pretok: 1,63 m³/h, tlak (maks.): 7,75 letvica, Kompresor zraka Atlas Copco SF 15 FF Proizvajalec: Atlas Copco Tip: SF 15 FF Leto izdelave: 2014 Največji tlak: 7,75 bar Iaedsxk U Dcepfx Adksp Pretok: 4,95 m³/min Volumenski pretok: 27,1 l/s, 1,63 m³/min Moč motorja: 14,8 kW = 20 KM Hitrost motorja: 2885 o/min Teža: 595 kg Napajanje: 400 V, 50 Hz, 3 faze Zasnova: brez olja ISO razred: 8573-1 razred 0 Oprema: integriran Workplace Air System™, opremljen s SMARTLINK Krmiljenje: Elektronikon Izvor: Izdelano v Belgiji Za pravilnost, popolnost in ažurnost podatkov ne prevzemamo odgovornosti.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Odsesavanje HURRICAN JSS-3-6-44-800 Leto izdelave 2007/2015 Trenutni volumenski pretok 87.900 m3/h Filtrirna površina 796 m2 Največja površinska obremenitev 130 m3/m2/h Rezervna zmogljivost 15.800 m3/h Dolžina cca 8.950 mm + povratni zrak Širina 2.950 mm Višina 9.720 mm Vrsta prahu: lesni ostružki/prah Iaodpfxsv Dfr Us Adkjp