CNC stružnica

Boehringer-VDF 250 CM x 3000 mm

Leto izdelave: 2015, Stanje: pripravljen za uporabo (rabljen), This is an inclined wire paper machine designed for the production of filter nonwovens, filter paper, insulation paper, membrane backing material, cardboard, tablecloths, and more. Operating speed: 5–120 m/min; flow rate: 2,500–20,000 l/min. The equipment originates from several manufacturers in Canada, Ukraine, and Europe. Several modifications have been made to the plant, including a new pulper, larger vacuum pump, vibrating screen for water treatment, a second headbox, new distributor, and additional improvements. An on-site inspection is possible. Credpfxsqzyaxo Afqjk

Stanje: novo, Bernardo Lead and Feed Screw Lathe Master 180 incl. 3-axis digital display Centre distance: 1000 mm Centre height: 180 mm Swing diameter over bed: 360 mm Swing diameter over gap*: 480 mm Swing diameter over cross slide: 220 mm Bed width: 185 mm Spindle bore: 51 mm Spindle mount: DIN 55029, D1-5 Speed range: (8 steps) 70 - 2000 rpm Longitudinal feed range: (32) 0.052 - 1.392 mm/rev Cross feed range: (32) 0.014 - 0.380 mm/rev Metric threads: (26) 0.4 - 7.0 mm Imperial threads: (34) 4 - 56 TPI Tailstock quill diameter: 42 mm Tailstock quill travel: 110 mm Tailstock taper: MT 4 Motor output S1 100%: 1.5 kW (400 V) Motor rating S6 40%: 2.2 kW (400 V) Machine dimensions (L x W x H): 1920 x 750 x 1600 mm Weight approx.: 540 kg * Removable bed section: 225 mm Scope of delivery Cjdpfx Asd Du Tisfqork • 3-axis digital readout i200 with LCD display • 3-jaw chuck DK11-200 mm / D5 • Faceplate 200 mm / D5, acc. to DIN 55029 • Fixed steady rest – max. passage diameter 70 mm • Follow rest – max. passage diameter 50 mm • Coolant system • Initial filling with Shell Tellus 46 • Extendable chip tray • Clamping plate 320 mm • 4-way tool post • Protective device for 4-way tool post • Safety clutch • Micrometer longitudinal stop • Thread dial indicator • LED machine lamp • Reducing sleeve • Change gears • 2 centres • Foot pedal with brake function in accordance with CE • Motor with magnetic brake according to CE standard • Machine base

Leto izdelave: 1974, Stanje: rabljeno, Druck: 340 t Hubweg: 200 mm Tischgröße unten: 100 x 800 mm Abstand oben/unten: – offen 510 mm (Lichte Weite) – geschlossen 310 mm Neue Hydraulik- und Elektroanlage Crsds Du Uwjpfx Afqok

Stanje: zelo dobro (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.800 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.100 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: TNC7, obremenitev mize: 5.000 kg, največja hitrost vretena: 10.000 obr/min, Oprema: transportni trak za ostružke, Rabljeni 5-osni obdelovalni center DMG s krmiljenjem TNC7 Retrofit 2025 DMG Deckel Maho DMU 200 P Leto izdelave: 1999/2025 Stanje: Dobro in popolnoma delujoče Krmiljenje: Heidenhain TNC7 x-hod: 1800 mm y-hod: 2000 mm z-hod: 1100 mm Tehnični podatki: - Okrogla miza D1400 x 1700 mm - Nosilnost mize 6000 kg - B-os - 60-kratni menjalec orodja - SK 50 - 10.000 obr/min - IKZ (notranje hlajenje) - 980 litrov rezervoarja za hladilno sredstvo - Transporter za ostružke - Pršilna pištola - Infrardeči merilni tipalo Csdpfx Afextwkweqerk Opcijsko: - Kineopt - VCS-Complete - Visokofrekvenčno vreteno 30.000 obr/min Prevoz in zagon lahko ponudimo ločeno. Vmesna prodaja je pridržana. Za tehnične podatke, navedene tukaj, ne jamčimo. Veljajo zakonske določbe.

Stanje: rabljeno, Leto izdelave: 2005, x-pomik 500 mm y-pomik 450 mm z-pomik 400 mm Krmilnik Heidenhain iTNC 530 c-os 360° b-os -5/+110 ° Število vrtljajev 20-10.000 vrt/min Pogonska moč – rezkalno vreteno 13 kW Vpenjalno mesto SK 40 Število orodij v magazinu 16 kos Hitri pomik 24 m/min Vpenjalna površina mize 630 x 500 mm Obremenitev mize 200 kg Teža stroja ca. 4,0 t Dimenzije D x Š x V 2,3 x 3,2 x 2,75 m Obdelovalni center 3+2 osi - Popolnoma programabilna vrtljiva/nagibna miza. - Zunanje hlajenje - Elektronsko ročno kolo Codpfx Ajw Eyg Iefqjrk - Menjava vretena leta 2015

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, CNC Lathe with C Axis GEMINIS - GHT4-G4 MACH-ID 9182 Manufacturer: GEMINIS Model: GHT4-G4 Control: FAGOR 8055 TC Year of manufacture: 2015 Front chuck with 180 mm bore Rear chuck with 180 mm bore Cedpewzh Eqofx Afqerk 3-guideway bed, width 750 mm Max. turning diameter: 800 mm X-axis travel: 450 mm Z-axis travel: 4200 mm Spindle bore: 162 mm Spindle speed: 900 rpm Tool changer: 8 positions Driven tool speed: 3000 rpm Driven tool power: 7.5 kW Tailstock quill: 5 Mk Quill travel: 250 mm Workpiece weight capacity: 2500 kg Length: 8200 mm Width: 3200 mm Height: 2900 mm Weight: 24,000 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1982, potovalna razdalja osi X: 1.650 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.000 mm, obremenitev mize: 3.500 kg, 3-axis Mitutoyo digital readout Table: 2000 x 700 mm Travel (X/Y/Z): 1650 x 1000 x 1000 mm Automatic lubrication Spindle: ISO 40 taper, maximum spindle speed 2066 rpm Weight: 7500 kg Cjdpfx Aowxyzfsfqork

Stanje: rabljeno, Leto izdelave: 2007, Maximum gear cutting diameter: 2000 mm Workpiece diameter: 2700 mm Table diameter: 1500 mm Maximum module: 22 Control system: 840D Rotational speed: 3.5 rpm Maximum table load: 20,000 kg Center distance: 70–1220 mm Stroke length: 30–330 mm Stroke rate: 10–200 strokes/min Total power requirement: 138 kW Machine weight: approx. 38 t Space required: approx. 11 x 5 m Machine: Fully CNC-controlled machine with electronic gear synchronization for C and D axis, equipped with digital INDRAMAT drive technology. Self-rigid machine bed of welded construction. Radial axis (X-axis) with hardened guideways, sliding guide with wrap-around design, Longitudinal guide with roller recirculating shoes. Precision-ground, preloaded ball screw with backlash-free preloaded nut. Digital AC drive technology featuring backlash-free transmission. Linear measuring system for radial positioning. Free-standing machine table with electrohydraulically backlash-free preloaded double worm gear, index wheel diameter 1365 mm, hydrostatic axial and radial bearings, automatic workpiece weight compensation. Through table bore diameter 500 mm, open at the bottom. Water-cooled digital AC servo motors. Machine must be installed on a foundation. Column: Machine column as high-rigidity cast construction for 1200 mm axial travel. Axial axis (Z-axis) with hardened guideways, sliding guide, longitudinal guide, and wrap-around roller recirculating shoes. Precision-ground ball screw with backlash-free preloaded nut. Digital AC drive technology. Rotary encoder for axial positioning. Gear shaping head: SK 4.1 with hydraulic NC servo drive for shaping spindle movement and cutter relieving, stroke length 330 mm, shaping spindle diameter 160 mm. Hydrostatically mounted shaping spindle, straight guiding and lateral guiding for relieving motion. Maximum tool diameter: 300 mm. Drive motor power: 30 kW Stroke numbers from 10 – 200 strokes/min, stroke speed from 5 – 45 m/min. Shaping spindle speeds for working and return stroke can be programmed independently. Within the cutting area, the spindle speed remains constant. Cutter wheel speed max. 10 rpm, digital AC drive technology. Credpsv E R Eiofx Afqok Cutter relieving direction for internal and external gear cutting can be manually reversed. Lateral offset of the shaping spindle axis up to max. 50 mm off machine center, manually adjustable, to prevent cutter wheel collision during return stroke.

Stanje: dober (rabljeno), STAR SV-32 CNC Sliding Headstock Lathe TECHNICAL DATA Main Spindle, Bar Capacity: 32 mm Travel: 310 mm Spindle Speed: 7,000 rpm Spindle Drive Power: 7.5 kW Minimum Increment, C-Axis: 0.01° Sub Spindle, Bar Capacity: 32 mm Spindle Speed: 7,000 rpm Credpfx Aeu Uicyjfqek Spindle Drive Power: 7.5 kW C-Axis Resolution: 0.01° Turret: Number of Tool Stations: 10 of which driven: 10 Speed of Driven Tools: 5,700 rpm Driven Tools, Power: 2.8 kW Tool Holder: Number of Tools: 4 of which driven: 3 Speed of Driven Tools: 6,000 rpm Weight and Dimensions: Weight: 3,800 kg Dimensions: 2,700 x 1,400 x 2,400 mm SCOPE OF SUPPLY Includes (not limited to): CNC Control: Fanuc Fire Suppression System: Siemens Oil Mist Separator: Donaldson Transformer High-Pressure Pump Parts Conveyor Chip Conveyor Precise scope of delivery as per photo documentation. No guarantee is given for the correctness, completeness, or currentness of the information provided.

Stanje: rabljeno, Leto izdelave: 2004, Technical details: Swing diameter over bed: 850 mm Swing diameter over cross slide: 580 mm Turning length: 4000 mm Centre distance: 4000 mm Faceplate diameter: 800 mm Control system: Siemens 810D Crodpfx Afju Ix Izeqek Spindle speed: 1 - 1600 rpm / 2-step Spindle torque: 6000 Nm Feed drive AC: X = cross + Z = longitudinal: 16,000 / 20,000 N Rapid traverse x-axis: 4 m/min Rapid traverse y-axis: 7 m/min Spindle bore: 130 mm (Spindle nose DIN 55027 size 11) Operating hours / On-time: to be read out h Tailstock quill taper: ISO MK 6 Tailstock quill stroke: 350 mm Max. workpiece weight between centres: 5,000 kg Max. workpiece weight unsupported: 1,800 kg Interface: RS 232 / V24 Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Total installed power: approx. 52 kW Machine weight approx.: 14.0 t Machine dimensions (LxWxH) approx.: 2.6 x 9.1 x 2.5 m Cycle lathe with Siemens cycle control Motor: 37 kW, rated speed 1,500 rpm; max. speed 6,500 rpm; torque 235 Nm two gear ranges Range II: spindle torque 258.9 to 1,364.6 Nm Range I: spindle torque 1,050.4 to 5,536.1 Nm Feed drive: three-phase servo drive 2x chip conveyors Double electric cabinet Parat quick change toolholder Coolant system Incl. various accessories (see photos), as well as steady rest and 3-jaw chuck Ø 500 mm Rota-S plus