Nakladalnik

Blanche TW36 / 2024 / Palletbord / Shovel - Radlader - ...

Stanje: nepreverjeno (rabljeno), Maximum milling length: 400 mm Maximum milling width: 150 mm Maximum clamping thickness: 25 mm Hydraulic motor: 2.2 kW 2 milling motors, each 2.2 kW Milling motor speed: 12,000 rpm Converter: 8 kVA, 200 Hz Gbjdpok Tyrwjfx Afqjg Weight approx.: 1,200 kg Output: approx. 200 - 600 pieces/hour, depending on shape and size

Stanje: pripravljen za uporabo (rabljen), Forklift truck Manufacturer: Jumbo Model: J60 DC12 Gbodpovtwuaofx Afqeg Diesel Year of manufacture: 1994 Load capacity: 6,000 kg Own weight: 9,260 kg Lifting height: 4,300 mm Approx. 25,000 operating hours Sale due to changeover to wheel loader All service and lubrication intervals have been fully documented and carried out in accordance with the inspection log! All filters (hydraulic, fuel, torque converter, air) have been replaced annually. Engine oil and oil filter changed every 250 operating hours. Only B0 diesel fuel has been used (no B7). Immediately available - fully operational Location: Austria, near St. Pölten

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1984, Max. turning length: 1200 mm Max. turning diameter: 250 mm 2 hydraulic tracing slides Spindle motor: 5.5 kW Gedpfx Asp Dt Twsfqobg Hydraulic motor: 2.2 kW

Stanje: rabljeno, No. 3231 Extraction System with Briquetting Press Spänex SHB 50 Used Complete disposal system for residual materials such as wood, paper, plastic, cotton, etc. The sawdust is transferred directly from the filter unit into the chip bunker of the hydraulic briquetting press. After compression, the briquettes are transported directly to the heating system. Gbodpfx Afewqhwleqsg Technical data according to manufacturer brochure: Output: 50 kg/h (depending on material) Throughput: 0.45 m3/h Briquette shape: octagonal, 125 x 70 mm Motor power: 5.5 kW Compression ratio: 1:10 Moisture content: min. 8%, max. 20% Sale by customer order, ex location near 69124 Heidelberg, without dismantling, transport, or installation Dismantling, loading, and transport by us available as an option Errors in description and price excepted To avoid any misunderstanding, a viewing on site is possible and recommended by appointment Sale as is Technical specifications, condition description, year of manufacture, and scope of delivery according to manufacturer brochure and/or previous owner, without guarantee Subject to prior sale No warranty is provided for used machines; sale is subject to: “bought as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex location

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, dolžina rezanja (maks.): 12.000 mm, največja širina rezanja: 1.000 mm, Small horizontal sawmill WRAVOR WRC 1000, the smallest in the range, fixed version: Gjdpfxevr Ez Ej Afqebg Solid flywheels with 1000mm diameter for a cutting diameter of 1M; cutting length adaptable according to possible frame extensions: currently 8M (12M frame). Hydraulic (dogs/rollers, aligners, log turners) and mechanical equipment: • 4 hydraulic loading arms mounted to the frame • 3 pairs of hydraulic dogs / space for 3 additional pairs as optional • Hydraulic log lifting with clamps, featuring 2 mechanical rollers and 1 driven roller, with adjustable height capability • Hydraulic aligners (up/down movement): 4 units • Mechanical supports: 3 units • Hydraulic lifting rollers: 3 units • 90° angle aligners, up/down movement: 3 units • Standard hydraulic log turners: 2 units • Hydraulic generator: 40L tank and 16L for the 4kW pump • Overhead electric cable mounted on rail and rollers • Mechanical outfeed table (2.5M, can be hydraulic, tilting, 4M, optionally connected to operator’s station) Operator station currently separated from the sawmill, basic control system, Wravor program, joysticks, and sawdust extraction system available as options. Hydraulic blade tension adjustment / Electric scorer / Hydraulic pushing arm for sawn timber / Right/Left blade guides: centralized blade lubrication / Head movement (worm screw)... PV 45 blade, length 6390mm, width 110mm

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 8.000 h, * Teleskopski kolesni nakladalnik JCB TM320S * Letnik 2018 Gbsdexy Uuaspfx Afqsg * 8000 delovnih ur * JCB motor, 108 kW * Približno 8000 kg delovne teže * Zgibni (artikulirani) * Hidravlični hitri menjalec * 3. hidravlični krog * Teleskopska izpustna dolžina 1,5 m * Maks. višina dviga: 5,20 m * Maks. izmetna višina: 4,50 m

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 6.000 mm, največja širina rezanja: 1.050 mm, MULTIFUNCTIONAL HORIZONTAL SAWMILL, DOUBLE CUT / WRC 1050 "VENEER" VERSION AUTOMATIC CUTTING, specifically for THIN VENEER LAMELLAE CUTTING • Chassis length: 11 m for 6.5 m log length, extensions available • DOUBLE-CUT SAW HEAD with adjustable mobile pressure guides to support the blade during cutting • SEPARATE CONTROL STATION & SYSTEM for the saw bed, to be positioned according to the defined layout – at the existing location, open operator station with or without seat integrating the control system • MAIN MOTOR 45 KW WITH FREQUENCY INVERTER option • WORM SCREW in each side pillar / 2 total / available with or without FREQUENCY INVERTER for faster and more accurate vertical movement • HIGH-POWERED HYDRAULIC GENERATOR ON CHASSIS: 18 KW + 200L RESERVOIR + FREQUENCY INVERTER for faster hydraulic equipment movements • FastSmartCut CONTROL SYSTEM, based on SCHNEIDER 4.0 / WRAVOR PROGRAM / 2 joysticks + touch screen is quoted in place of standard initial PLC 1040 system • Automatic PUSHERS for sawn timber, including the GUILLOTINE option: vertical arm for difficult timber for increased speed • 1 CAMERA - 1 screen, additional cameras optional • HYDROFOR COOLING SYSTEM • LUBRICATION SYSTEM - ELECTRIC or mechanical pump version • 5 pairs of hydraulic DOGS, with hydraulic cylinder option • 5 hydraulic ROLLERS, up/down movement • 3 NEW ALIGNERS (not at 90°), next generation • 3 NEW LOG TURNERS, V-shaped (cradle) system, next generation • ELECTRICAL WIRING: flat cables in cable duct • 4 m SILON BELT OUTFEED CONVEYOR, automatic up/down movement controlled via the system panel • SAWDUST EXTRACTION SYSTEM BY ZIPPER: collection (vacuum on the frame) as close to the saw blade as possible, with optional connection to existing EBT extraction line: complements VENEER system, more powerful than standard • SAW HEAD CABLE DRIVE, asynchronous SEW system for increased speed and precision: optional Gbsdpfx Afjvtqtveqsg Differences between the standard horizontal sawmill bed and the veneer-specific sawmill bed: the saw is equipped with the following special features: - Reinforced saw head casing to prevent any sawdust intrusion between the flywheel and the blade - Additional protection shields due to higher capacity and power of sawdust extraction - Twin-cut blade - Graphite blade guides (bakelite on standard model) - Special system for changing graphite blade guides - Special protection for frame and sensors, plexiglass in lid (different head cover design compared to standard bandsaw) - Additional sensors for blade deviation - Pneumatic air-jet cleaning along the entire saw bed length Additional OPTIONS available upon request

Stanje: novo, Leto izdelave: 2025, Dealer wanted! Commodity code: 84659600 Briquette diameter: 70 mm Front bushing: 120 mm Maximum briquette stroke: 100 mm Optimal briquette stroke: 80 mm Throughput (depending on material): up to max. 150 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil capacity: 220 liters Silo diameter: 1200 mm Silo shape: 12-sided Gbodpfx Aevucclsfqjg Silo volume: approx. 1.0 cbm Pump: 75 liters Hydraulic pre-compactor Feed material must be free from metals and mineral contaminants. Damage to pressing tools and/or increased wear may occur as a result.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 3.443 h, CLARK Forklift Load capacity: 5,000 kg Gbedpewtffxsfx Afqsg Diesel New forks, length: 1.80 m Original forks, length: 1.20 m (included) New seat with armrest Maximum lifting height: 4.80 m Operating hours: 3,443 Service performed in May 2025 Ready for immediate delivery

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2026, obratovalne ure: 1 h, Super special price, as the machine was operated during our in-house exhibition. Operating hours: 2 Immediately available – subject to prior sale Once it’s gone, it’s gone! Compact design, high reliability, and excellent value for money: These are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foam, or paper. Special feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput capacity (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Equipment: Press Powerful press mechanism with low-wear, chrome-plated jaws Pre-compactor with end-position damped cylinder and bolted cover Control cabinet with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Bin with agitator and gearbox motor Screw channel with discharge screw and gearbox motor Accessories: Gbsdpfx Afjtnz Hbeqsg Briquette length monitoring Automatic on/off Location: 54634 Bitburg