Klimatska komora Binder MKF 720

Binder MKF 720

Stanje: zelo dobro (rabljeno), Binder Model: MKF 720 E3.1 Climate Test Chamber (Environmental Simulation Chamber) Air-cooled Temperature range: -40°C to +180°C Humidity range: 10% r.h. to 98% r.h. The MKF climate test chamber is a specially designed environmental simulation cabinet for industrial material testing and environmental simulation, providing exceptional performance that far surpasses the capabilities of a standard heating chamber. It fulfills all requirements for material testing, as well as aging and stress tests. TECHNICAL DATA: Housing dimensions: Width: 1615 mm Height: 2005 mm Depth: 1230 mm Interior dimensions: Width: 1200 mm Height: 1020 mm Depth: 600 mm Internal volume: 734 liters Net device weight (empty): 590 kg Maximum total load: 160 kg Maximum shelf load: 40 kg Temperature Performance Data: Temperature range: -40°C...180°C Temporal temperature deviation: 0.1...0.5 ± K Spatial temperature deviation: 0.1...1.8 ± K Average heating rate according to IEC 60068-3-5: 4.8 K/min Average cooling rate according to IEC 60068-3-5: 4.8 K/min Max. heat compensation: 6500 W Climatic Performance Data: Temperature range: 10...95°C Humidity range: 10...98% r.h. Temporal temperature deviation dependent on setpoint: 0.2...1.5 ± K Fedpfeymcqdex Abvjfw Max. heat compensation: 1000 W Electrical Data: Nominal voltage: 400V 3N~ ±10% 50Hz Nominal power: 11 kW 19.2 A Refrigerant: R404A 5 kg Important note: "The table shown in the photos is not included in the sale." For your safety as the buyer, please note the following information! The following actions are taken on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Specifications and data subject to change and error!) For further questions, we are happy to assist you by phone.

Stanje: rabljeno, Leto izdelave: 2008, x-travel 450 mm y-travel 400 mm z-travel 400 mm Control: Heidenhain Mill Plus V600 Machine weight approx. 7000 kg 24,000 rpm 16x HSK63A tool changer 40 bar internal coolant supply 250-litre coolant tank Fodpfx Aswgi Drsbvofw Chip conveyor

Stanje: dober (rabljeno), Type: TS -70/1000-10 For sale: CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit, Compressor has been replaced! Equipment: • Multi-touch control system • USB and Ethernet interfaces • Cable feedthroughs for test cables – 4 × Ø 125 mm • Safety temperature limiter Fields of application: • Environmental and endurance testing • Temperature cycling tests (stress screening) • Quality assurance and R&D • Electronics, automotive, material testing Test chamber volume: 1000 liters Test chamber dimensions: • Height: approx. 1000 mm • Width: approx. 860 mm • Depth: approx. 1100 mm External dimensions: • Height: approx. 1950 mm • Width: approx. 1270 mm • Depth: approx. 1900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Fedpfxoxdi Ezj Abvjfw Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerants: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) For any further questions, feel free to contact us by phone.

Stanje: rabljeno, Leto izdelave: 2008, x-axis travel 1000 mm y-axis travel 1000 mm z-axis travel 1000 mm Control: Siemens 840D powerline Spindle speed: 8,000 rpm Drive power – main spindle 100/40% duty cycle: 32/44 kW Tool holder: HSK-A 100 Number of tool positions: 354 Rapid traverse (x / y / z): 60 m/min Pallet size: 800 x 800 mm According to our assessment, the machine is in good used condition and can be inspected under power by prior appointment. Technical features: - NC rotary table with pallet carrier - Rotary pallet changer - ICS 40 bar (internal coolant supply) - Rotating viewing window - Chain-type magazine with 300 magazine positions - Tool sluice with turning wall, 30 positions (inactive) / 54 positions (active) - Infrared touch probe - Tool breakage monitoring SK 50, mechanical version - Tool identification Ffsdpfjxcp R Uox Abvsw - Signal lamp, 4-color Accessories, depicted tools and clamping devices are only included in the delivery if explicitly stated in the additional information. Technical data and details subject to change and error; prior sale reserved!

Leto izdelave: 2022, stanje: zelo dobro (rabljeno), Dycometal Model: CCK -40/1500T Climatic chamber, water-cooled Volume: 1,500 liters Internal dimensions: height 1,000 mm, width 1,000 mm, depth 1,500 mm External dimensions: height 2,200 mm, width 1,293 mm, depth 3,400 mm Thermal test Minimum temperature: -40°C Maximum temperature: +150°C Cooling rate: 2.0 K/min Heating rate: 3.5 K/min Temperature stability: ±0.1°C to ±0.3°C Fodpeu N Uugsfx Abvofw Temperature uniformity: ±0.5°C to 1.5°C Climatic test temperature range: +10°C to +90°C Relative humidity range: 10% to 98% RH Dew point range: +6.5°C to +86°C Humidity stability: ±1% RH to ±3% RH Condenser: water-cooled Rated voltage: 400 V 3N~PE 50 Hz Power: 16.1 kW, 27.5 A Refrigerant: R-452A Weight: 1,120 kg Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) If you have further questions, feel free to contact us by phone.

Stanje: rabljeno, Leto izdelave: 2001, x-pomik 2.000 mm y-pomik 1.200 mm z-pomik 1.400 mm Krmiljenje Heidenhain 426 Hitrost vretena 3.000 vrt/min Vpenjalni sistem orodij SK 50 Število orodnih mest 20 pozicij Po naši oceni je stroj v dobrem, rabljenem stanju in si ga je možno po dogovoru ogledati pod napetostjo. Fsdpfoxu Nxvjx Abvjfw Tehnične značilnosti in dodatna oprema: - Krmiljena rotacijska miza - Glava za rezkanje z brezstopenjskim pozicioniranjem v osi B - Avtomatski menjalec orodij z 20 mesti - 2x transportni trak za odrezke v vzdolžni smeri, izmet levo - Hladilni sistem - Popolna zaščitna kabina Dodatna oprema, prikazana orodja in vpenjalne naprave (npr. vpenjalna plošča in primeži) niso vključeni v dobavo! Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter vmesne prodaje.

Leto izdelave: 2016, obratovalne ure: 14.242 h, stanje: zelo dobro (rabljeno), Vötsch temperaturna testna komora, vodno hlajena Tukaj vam ponujamo Vötsch temperaturno testno komoro. Vötsch 7060-5 vodno hlajena komora Dimenzije testne komore: višina: 950 mm, širina: 800 mm, globina: 800 mm Zunanje dimenzije: višina: 1995 mm, širina: 1090 mm, globina: 1960 mm Kapaciteta testne komore: približno 600 litrov Fedpfx Abot Txqrjvsfw Letnik izdelave: 2016 Delovni čas: 14.242 ur Priključne odprtine: R1: NW 125 mm L1: NW 50 mm Podatki za temperaturne teste: Temperaturno območje: -72°C do +180°C Temperaturno odstopanje v času v središču uporabnega prostora: ± 0,1 do ± 0,5 K Prostorsko temperaturno odstopanje: ± 0,5 do ± 2,0 K Hitrost spremembe temperature: Segrevanje: 6,0 K/min Hlajenje: 6,0 K/min Kompenzacija toplote pri 20°C: maks. 5000 W Kompenzacija toplote pri -20°C: maks. 5000 W Električni priklop: Nazivna napetost: 3/NPE AC 400V ±10% 50Hz Nazivna moč: 13,0 kW Nazivni tok: 23,0 A Hladilno sredstvo: R-404A in R-23 Teža (približno): 650 kg Za vašo varnost kot kupca upoštevajte naslednje: 1. Komora deluje brezhibno. 2. Nobene komponente ni potrebno zamenjati. 3. Hladilno sredstvo je napolnjeno skladno z zakonodajo. Stanje: rabljeno (odlično) (Spremembe in napake v tehničnih podatkih in specifikacijah so pridržane!)

Leto izdelave: 2016, obratovalne ure: 9.195 h, stanje: zelo dobro (rabljeno), Vötsch Temperierkammer, wassergekühlt Hier bieten wir Ihnen eine Vötsch Temperaturprüfkammer an. Vötsch 7060-5 wassergekühlte Kammer Innenmaße der Prüfzelle: Höhe: 950 mm, Breite: 800 mm, Tiefe: 800 mm Außenmaße: Höhe: 1995 mm, Breite: 1090 mm, Tiefe: 1960 mm Prüfvolumen: ca. 600 Liter Baujahr: 2016 Betriebsstunden: 9195 Durchführungen: R1: NW 125 mm L1: NW 50 mm Prüfwerte für Temperaturtests: Temperaturbereich: -72°C bis +180°C Temperaturabweichung zeitlich im Zentrum des Nutzraums: ± 0,1 bis ± 0,5 K Räumliche Temperaturabweichung: ± 0,5 bis ± 2,0 K Temperaturänderungsgeschwindigkeit: Ffsdpfx Aot Txttobvjw Heizen: 6,0 K/min Kühlen: 6,0 K/min Wärmeabfuhr bei 20°C max.: 5000 W Wärmeabfuhr bei -20°C max.: 5000 W Elektrischer Anschluss: Nennspannung: 3/NPE AC 400V ±10% 50Hz Nennleistung: 13,0 kW Nennstrom: 23,0 A Kältemittel: R-404A und R-23 Gewicht (ca.): 650 kg Die folgenden Informationen dienen zu Ihrer Sicherheit als Käufer! 1. Die Kammer funktioniert einwandfrei. 2. Es müssen keine Komponenten ersetzt werden. 3. Das Kältemittel ist gesetzeskonform befüllt. Zustand: gebraucht (sehr gut) (Änderungen und Irrtümer in den technischen Daten und Spezifikationen vorbehalten!)

Stanje: dober (rabljeno), Vötsch Type: VTS 7048-1 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Performance Data: With a temperature change rate of 10 K/min Test chamber dimensions: Height 950 mm x Width 800 mm x Depth 650 mm External dimensions: Height 2025 mm x Width 1000 mm x Depth 2480 mm Temperature range: -70°C to +180°C Ffedpsxzgn Iefx Abvow Temporal temperature deviation: ± 0.3 to ± 0.8 Spatial temperature uniformity: ± 0.5 to ± 2 Cooling rate: 10 K/min Heating rate: 10 K/min Heat compensation at -20°C: 8000 W Heat compensation at +20°C: 8000 W Test volume: 480 liters Left: 1x side port ∅ 125 mm Left: 1x side port ∅ 50 mm Right: 1x side port ∅ 125 mm Chamber is water-cooled Test chamber lighting: Halogen bulb 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 17 kW Rated current: 30 A Refrigerant: R-404 A / R-23 Weight: approx. 1250 kg For your security as buyer, please note the following information: The following points are carried out in advance for the chambers we offer: 1. Functional check and replacement of any necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and technical data subject to change or error!) For further questions feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Na prodaj kompletni nosilci orodij GARANT SK40-10-50 z nameščenimi monolitnimi VHM rezkalniki. Izdelki priznane znamke Hoffmann Group Germany, pripravljeni za takojšnjo uporabo na CNC obdelovalnih centrih. • Tip vpenjanja: SK40 (DIN 69871) • Velikost vpenjalne odprtine: Ø10 mm • Dolžina: 50 mm • Katalogna številka: 300100.10 • Uravnoteženje: G2.5 do 25.000 vrt/min • Komplet vsebuje: monolitne VHM rezkalnike Ø10 (različni tipi – vidni na fotografijah) • Idealno za obdelavo jekla, nerjavečega jekla, litega železa in kovinskih zlitin • Zelo dobro stanje – preizkušeni, pripravljeni za delo Nosilci GARANT zagotavljajo najvišjo kakovost vpenjanja in preciznost obdelave pri visokih vrtljajih. -- NAVEDENA CENA JE ZA 1 KOS -- Ffjdpfow Sy Ahox Abvjw