3D tiskalnik

BigRep Pro

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1904P201, Leto izdelave: 2019, skupna dolžina: 1.950 mm, skupna višina: 1.790 mm, skupna širina: 2.430 mm, vrsta vhodnega toka: trifazni, skupna masa: 1.500 kg, vhodna napetost: 380 V, vhodni tok: 16 A, vhodna frekvenca: 50 Hz, moč: 5,8 kW (7,89 KM), For sale is a BigRep PRO, which unfortunately has not received the attention and usage it deserves at our facility and has become oversized for our current needs. Nksdjv In Hcjpfx Abbst We purchased the machine directly from the manufacturer, and it has been fully serviced and maintained by BigRep GmbH’s own qualified technicians, ensuring we can hand it over in good conscience. The only issue, as visible in the photos, is the window on the left door, which had to be replaced due to an accident with the original one. This is merely a cosmetic flaw and does not affect the machine’s functionality in any way. The entire unit is still wrapped in the manufacturer’s protective film, as clearly shown in the pictures – it’s practically in factory-new condition. Depending on the agreement, we can also include a substantial amount of filament (approximately 15 large spools). The machine can be inspected and tested on site by appointment. For further questions or information, please don’t hesitate to contact us directly.

Stanje: rabljeno, Leto izdelave: 2020, DOOSAN LYNX 2100LYA Leto izdelave: 2020 FANUC upravljalnik na dotik Specifikacije: Nodpfx Abex Id D Aobskt Maks. hitrost vretena: 6000 obr/min Maks. dolžina struženja: 510 mm Maks. premer palice: 51 mm Maks. premer struženja: 300 mm Os Y: 105 (±52,5) Os C: 360 Glava: BMT45P 24 pozicij - Programabilna konica - Merilna sonda za orodje - Odmetalnik ostružkov LNS - Pogonski držala za orodja 4 kosa (2/2) - Navadni držala 6 kosov Število delovnih ur: 3177 ur

Stanje: rabljeno, Leto izdelave: 2013, proizvajalec krmilnikov: Siemens, model krmilnika: 840Dsl, Description: Nkjdpjw Tg Adefx Abbet Main Spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop nova Kombi Axzug size 65 Counter Spindle: Technology: Motor spindle Speed: 7,000 rpm Power (max.): 22 kW Torque (max.): 130 Nm Workpiece clamping: 3-jaw chuck, SMW Autoblok KNCS-N-225-66 Part ejector: Pneumatic Travel in Z: 750 mm Tool Carrier I (X/Y/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool capacity: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 270/100/750 mm Rapid traverse in X/Y/Z: 24/10/30 m/min Tool Carrier II (X/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool capacity: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 205/750 mm Rapid traverse in X/Z: 24/30 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: High-pressure coolant pumps, 14 bar Raw material feeding: Short bar loader, EMCO LM 1200 Finished parts removal: Pneumatic workpiece pick-up unit with conveyor belt Oil mist extraction: Mechanical separator, manufacturer Absolent Tool holders: Various fixed and driven holders Additional equipment: Spindle cooling unit

Stanje: dober (rabljeno), Leto izdelave: 2016, 1 rabljeni 5-osni obdelovalni center Proizvajalec: Haas, Model: UMC-750, Leto izdelave: 01/2016, Prebrane ure delovanja: 4.960, ure pomika: 10.247 Pomik X/Y/Z = 762x508x508 mm, 10.000/5.000 Bh Nkedpfx Abjxyinnobot Vpenjalo orodij SK40, Menjalec orodij za 40 orodij, NC SRT dimenzija mize: 630x500 mm, Maksimalna obremenitev mize: 300 kg, Maksimalni premer obračanja: 686 mm,

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 500 mm, dolžina pomika po osi Y: 250 mm, dolžina podajanja os Z: 160 mm, potovalna razdalja osi X: 500 mm, pomik osi Y: 250 mm, pomik po osi Z: 480 mm, največja hitrost vretena: 9.000 obr/min, hitrost pomika os X: 2 m/min, hitrost podajanja osi Y: 2 m/min, hitrost podajanja os Z: 1 m/min, hitrost vretena (min.): 100 obr/min, premer tulec: 160 mm, širina mize: 320 mm, dolžina mize: 880 mm, Ponujamo Fehlmann Picomax 54, letnik 2001, v zelo dobrem stanju. Stroj je bil malo uporabljen, saj je bila naša proizvodnja v glavnem osredotočena na večje avtomatske CNC stroje. Podrobnosti: Proizvajalec: Fehlmann Model: Picomax 54 Leto izdelave: 2001 Stanje: Popolnoma delujoč, možno testiranje na lokaciji Lokacija: Boxtel, Nizozemska Razpoložljivost: Takoj Nkjdsxwk D Espfx Abbot Gre za zanesljiv in natančen stroj, idealen za orodjarne, izdelavo prototipov ali male serije. Proizvodno podjetje na Nizozemskem se zapira, zato je stroj na voljo takoj.

Stanje: dober (rabljeno), Leto izdelave: 2001, Robot with units, rotary table, and enclosure Nkodpfx Ajp E Db Tsbbjt Please contact us if you are interested!

Stanje: zelo dobro (rabljeno), 3D Systems We are offering you a 3D printer here. Solid-State Nd:YVO4 with third harmonic generation Wavelength: 354.7nm Nominal laser head output: 1450 mW (1000 mW at the resin surface under standard conditions) Zaphyr™ Coating System: Process: Interchangeable coater Adjustment: Self-leveling and self-correcting Production layer thickness: Minimum 0.05mm, Maximum 0.15mm ProScan™ Scanner Edge detection (diameter at 1/e2): Nominal in standard mode 0.13mm Nkedpfx Asnkalgobbjt Wide line detection, nominal: 0.76mm Maximum drawing speed Edge detection: 3.5m/sec Wide line detection: 25m/sec Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Environmental conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirements: Dimensions (W x D x H), unpacked: 1260mm x 2200mm x 2280mm Weight packed (without RDM): 1590kg Model: iPro 8000 Condition: used Scope of delivery: (Please see pictures) (Changes and errors in the technical data, specifications reserved!) If you have further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 5.000 h, Funkcionalnost: popolnoma funkcionalen, HAAS upravljanje Dimenzije stola D500 mm Maksimalno opterećenje stola 300 kg X osa hod 762 mm Y osa hod 508 mm Z osa hod 508 mm B osa +120 do -35 stepeni C osa 1-360 stepeni Udaljenost između kraja vretena i površine stola 102 - 610 mm Maksimalna brzina obrtanja 8100 obrtaja/min Nkodpfx Asxva Ahebbst Maksimalni obrtni moment 122,0 Nm pri 2000 obrtaja/min Snaga pogona 22,4 kW Pogonski sistem inline direktni pogon Prihvat SK40 Magacin alata 30-1 Maksimalni prečnik alata (susedni položaji zauzeti) D64 mm Maksimalni prečnik alata (susedni položaji prazni) D127 mm Maksimalna dužina alata 305 mm Maksimalna težina alata 5,4 kg Težina 6500 kg Dimenzije DxŠxV = 4420 x 2340 x 2540 mm Oprema, dodatna oprema - Sistem za hlađenje - Visokopritiska pumpa (IKZ) - Transporter strugotine - RENISHAW merenje dužine alata - RENISHAW merjenje nulte tačke - Priručnici Mašina je još uvek u proizvodnji i obrađuje samo aluminijumske delove. Može se pogledati u radu pod naponom u Mađarskoj. Nabavljena je nova u Mađarskoj.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, skupna dolžina: 3.000 mm, skupna višina: 2.000 mm, Industrial 3D Printer – Sinuprint 3000 A state-of-the-art solution for large-format 3D printing, ideal for mold making, design elements, composite parts, and structural components. The Sinuprint 3000 combines the flexibility of a robot with the precision of CNC control, making it the perfect choice for companies seeking a robust and scalable additive manufacturing solution. Its range of applications extends from mold making and shipbuilding to interior construction and customized large-scale structures. Technical specifications: Printing system: CEAD E25 or S25 extruder (configurable based on customer requirements) Robot arm: COMAU N-170, 3 m reach, 160 kg payload Control system: Siemens SINUMERIK ONE – full CNC control for maximum precision Software compatibility: ADAXIS, AiBuild, RhinoCAM, Siemens NX, and other CAD/CAM platforms Condition: New machine Nkjdpfswgkqtsx Abbjt Optional equipment: Heated print bed for optimized adhesion and print quality Note: The standard configuration includes the CEAD E25 extruder. Software is not included, but can be offered as an option.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, 3D Systems Projet 3500HDMax 3D printer – purchased in 2013, good condition, fully functional. Nkjdpfxswnbd Hj Abbot