LINIJA STROJEV ZA FURNIRANJE

BIESSE Stream line

STREAM SB LINE (WINNER W1 + STREAM C SB1/SB2 + SP30 + TURNER)
Year of manufacture: 2021
Technical condition: very good

Panels: particleboard, MDF, HDF, plywood, blockboard, solid wood.
Surfaces: ABS / PVC / laminate / veneer / lacquer / melamine.
Shape: rectangular, without grooves or holes.
Roughness: average < 5 µm, max. < 35 µm.
Element operating temperature: < 50°C.
Minimum density: particleboard > 650 kg/m³, MDF > 750 kg/m³.

FEEDER / STACKER WINNER W1
Element length: min 300 mm.
Element width: min 240 mm (double row: min 120+120 mm), max 1200 mm (double row: max 600+600 mm).
Element thickness: 10–60 mm.
Element weight: up to 100 kg.
Element flatness: ±1 mm/m (max. total ±2 mm over the entire length).
Uniform stack height on conveyor (H=250 mm): min 300 mm, max 1500 mm.
High-speed set rates: Y-axis (carriage) 210 m/min, Z-axis (beam with suction cups) 130 m/min (+output ~2 cycles/min).
Base output: 15 cycles/min (depending on composition/weight/spacing).
Compressed air consumption: 950 Nl/min.
Installed power: 16 kW.
Option: powered plate separator – air 1050 Nl/min, power 8 kW.

DOUBLE-SIDED EDGE BANDING SIZERS

STREAM C SB1 (first pass)
Panel overhang beyond conveyor: 35 mm.
Panel thickness: 10–60 mm.
Edge thickness: 0.3–3 mm.
Edge height: 15–65 mm.
Table height: 950 mm.
Panel width: 240–1200 mm (SB1 TWIN: min 100 mm; SB1 SOFT: min 270 mm).
SOFT profile depth at 50 mm overhang: 20 mm (greater depth requires changes in overhang/accessories).

STREAM C SB2 (second pass)
Panel overhang beyond conveyor (fixed): 35 mm (SB2 SOFT: 50 mm).
Panel thickness: 10–60 mm.
Edge thickness: 0.3–3 mm.
Edge height: 15–65 mm.
Table height: 950 mm.
Dog spacing: 500 mm.
Panel width: 240–1200 mm (SB2 SOFT: min 270 mm).
Panel length: 240–2700 mm.
SOFT profile depth at 50 mm overhang: 20 mm (greater depth requires changes in overhang/additional tables).

GLUING UNIT SP30
Edge thickness: 0.3–3 mm.
Max. shearing cross-section: 135 mm² (3 × 45).
Panel thickness: 10–60 mm.
Edge height: 15–65 mm.
Minimum edge length: 250 mm.
Glue tank: 1.3 kg.
Glue magazine: 11 kg.
Application capacity: 16 kg/h.
Edge roll diameter: 800 mm.

EDGE TRIMMING LENGTH CONTROL (options)
Djdpfxjw R Savo Ag Njwc
EC40: minimum length 200 mm, speed 40 m/min, tolerance ±3 mm.
EC60: minimum length 200 mm, speed 60 m/min, tolerance ±5 mm.

PANEL TURNERS TURNER PT1 / PT2
Element length: 300–3200 mm.
Element width: 200–1200 mm.
Element thickness: 10–80 mm.
Maximum element weight: 100 kg.
Panel flatness tolerance: 1 mm/m.
Base flatness tolerance (area 8000 × 3000 mm): ±10 mm.
Compressed air demand: 250 L/min.
Installed power: 7 kW.

Installation and commissioning possible at extra cost.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.