Enostranski stroj za robove

BIESSE STREAM B1 7.0

Stanje: rabljeno, številka stroja/vozila: 005062, Type of applied edge: thin edge, thick edge Adhesive system: EVA Joint milling: yes Multifunctional unit: yes Max. feed speed: 25 m/min Dsdpfsybawdex Agpeup Maximum panel thickness: 60 mm Working units: 8 pcs

Stanje: rabljeno, številka stroja/vozila: 006370, Type of applied edging: thin edge, thick edge Gluing system: EVA Joint milling: yes Multifunction unit: yes Top milling unit: yes Duedpfx Agol Txw Hepjp Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 12 units

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 1.300 mm, dolžina obdelovanca (maks.): 3.200 mm, največja debelina roba: 3 mm, Oprema: CE označba, TECHNICAL DETAILS Max. feed speed: 24 m/min Maximum panel thickness: 60 mm Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 320 mm Duedsxw T Tpjpfx Agpsp Maximum panel length: 3,200 mm Minimum panel width: 150 mm Maximum panel width: 1,300 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Number of working units: 8 UNITS Unit for panel sizing 1 Unit: Trimming Model: RT30 Motor power: 3.5 kW Max. speed: 9,000 rpm Edge processing unit 1 Unit: End trimming Model: IT90-S Number of motors: 2 Max. processing speed: 28 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge processing unit 2 Unit: Edge milling unit Model: RF10 Number of motors: 2 Motor power: 1 kW Max. speed: 12,000 rpm Edge processing unit 3 Unit: Multifunction unit Model: AR30 Number of motors: 2 Max. processing speed: 18 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge processing unit 4 Unit: Edge scraper Model: RB40 Edge processing unit 5 Unit: Glue scraper Model: RC20 Edge processing unit 6 Unit: Brush Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Max. speed: 1,400 rpm MACHINE DETAILS Total installed power: 25 kW Dimensions Conveyor length: 12,300 mm Width: 1,300 mm Length: 12,300 mm EQUIPMENT Jointing milling unit Multifunction unit Top pressure Pressure by rubber-coated belts Panel support guide Panel positioning by NC Angled panel infeed system Automatic time-based engagement Edge preheating lamps Coil magazine Hotmelt glue pot Prefuser for hotmelt Edge pressing roller track Spraying unit Machine programming software: SINTRA Panel ejection via transfer roller conveyor Panel feed by motorized carpet Edge banding machine return conveyor, left CE marking

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): Dusdpegwbbqefx Agpsp No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: zelo dobro (rabljeno), Panel dividing saw angular system Control: OSI Plus - Optiplanning software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lifting table (mm): 4500 x 2200 1st pusher saw with grippers (qty): 5 Rotating device (for panels) up to 90° 1st panel dividing saw max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 Waste cutting shear 2nd pusher saw with grippers (qty): 10 2nd panel dividing saw max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 Dujdpfx Aoukhd Asgpsp No. 2 front air flotation tables (mm 2200 x 1500) Automatic unloading bridge for cut panels "RBO (BIESSE)" Model Lifter with 6 stacking positions

Stanje: rabljeno, številka stroja/vozila: 007984, Maks. obdelovalna širina: 1300 mm Min. obdelovalna debelina: 4 mm Delovna miza: nastavljiva Podtlačna preproga: da Število delovnih enot: 4 kos. Dujdswqdbmjpfx Agpep

Stanje: rabljeno, Leto izdelave: 2020, skupna višina: 2.100 mm, skupna dolžina: 2.000 mm, skupna širina: 2.500 mm, Price: On request - Machine available from: 2025-12-15 - Year of manufacture: 2020 - Documentation available: Yes - CE mark present: Yes - CE certificate available: No - Serial number: 1000040377 - Main motor power [kW]: 10 - Number of controlled axes [pcs]: 3 - Working area X [mm]: 975 - Working area Y [mm]: 1321 - Working area Z [mm]: 243 - Number of milling spindles [pcs]: 1 - Tool holder interface: ISO30 - Spindle diameter [mm]: 16 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 18000 - Horizontal drilling machine: Yes - Horizontal drilling spindles [pcs]: 10 - Vertical drilling machine: Yes - Software: Biesse Works - Saw unit included: Yes - Safety device: - Spindle speed control: Variable - Voltage [V]: 400 Dodpfx Agsx Ad R Nepjup - Power consumption [A]: 18 - Fuse [A]: 32 - Power [kW]: 10.0 - Transport dimensions: 2000mm x 2500mm x 2100mm (L x W x H) - Transport packages [pcs]: 2 Financial Information VAT: The indicated price is exclusive of VAT VAT/margin taxation: VAT deductible for entrepreneurs Delivery and trade-in possible at any time for all industrial equipment Glenn Smeets

Leto izdelave: 2010, stanje: dober (rabljeno), USED CNC BIESSE BREMA EKO 902 INSERT TECHNICAL DETAILS: 3-AXIS (X-Y-Z) CNC MACHINING CENTER - Full protection of the operating head and the working area on the machine - Numerical control (CNC) with BIESSE Works software on Windows - Vertical panel positioning with 2 panel clamping vices - Panel feed (in the X-axis direction, on the lower support with rubber rollers), movement of clamping vices (in X-axis) for panel/workpiece fixing WORKPIECE DIMENSIONS (WORKING RANGE): - Length Min 160 mm / Max 3200 mm - Width Min 35 mm / Max 900 mm Dusdpohknbrjfx Agpjp - Thickness Min 8 mm / Max 80 mm WORKING UNITS: - No. 1 vertical spindle (electrospindle) ER32 (4.5 KW) with inverter (up to 18000 RPM) - No. 1 circular saw (for grooves), 120 mm diameter (fixed on X-axis) - No. 13 independent vertical drilling spindles (6 on X-axis + 7 on Y-axis) - No. 8 independent horizontal drilling spindles (3+3 on X-axis and 1+1 on Y-axis) - No. 1 drilling head for hinge boring - Total installed power: 20 KW AUTOMATIC DOWEL INSERTION UNIT ON BOTH SIDES WITH PRESSURE PUMP FOR GLUE APPLICATION.

Leto izdelave: 2001, stanje: rabljeno, • Heating plate size (mm): approx. 1500 x 2700 Duedpekt N Huofx Agpop • Max. usable area (mm): 1250 x 2450 • Loading side (mm): 1500

Stanje: zelo dobro (rabljeno), COSTA LEVIGATRICI Series S model SN with 5 units - First unit: electronically segmented transverse belt - Second unit: 1 roller - Third unit: 1 roller - Fourth unit: electronically segmented super-finishing pad - Fifth unit: electronically segmented transverse belt Working width: 1350 mm Vacuum system Inverter on all belt units Inverter on feed conveyor Outfeed brush unit Djder Iyvmopfx Agpoup Outfeed blower unit