Miza za brušenje Splashback

Beck Absaugwand mit Spritzgerät BE AL 150/70 (2956)

Stanje: novo, Thread diameter M3 - M16 mm Infinitely variable speed up to max. 187 rpm Working range: 180 - 2000 mm Gtsdjfg U Sqepfx Afqst Motor power: 0.7 kW Electric tapping machines for M3 - M16 threads, Angle adjustable. 9 quick-change chucks with slip clutch. Adjustable via display: Variable speed, adjustable depth, material selection, choice of main rotation direction, thread selection. Optional: Clamping table with T-slots: 990x700x800mm. Magnetic base. Also available for: M14 to M24 and M27 to M33.

Stanje: rabljeno, Plate width: 2510 mm Plate depth: 5135 mm Plate height: 345 mm Weight: approx. 10 t Space requirement: approx. 2.5 x 5.1 x 0.38 m T-slot dimensions: 28 x 45 mm – Height: 48 mm Gjdehpvavopfx Afqott Number of T-slots: 9 Slot spacing: 220 mm Edge distance: 240 mm Slot size: 28 mm

Stanje: rabljeno, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL type AZP Curtainsider low-loader, low-loader trailer, low-loader for machinery transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Curb weight: 5,500 kg Gtodpfx Ajt N Antefqot Payload: 18,500 kg Platform height: 840 mm Load height under the curtain frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear swing doors at sideboard height - Curtain frame with EDSCHA roof system - Curtain frame easy to dismantle (usable even with the curtain frame removed and the curtain moved forward) - Spare wheel mounted on the front wall - Separate raising and lowering of front and rear axles - Middle axle as lift axle - Drawbar – extendable in several stages - Very sturdy lashing rings on the outer frame and in the centre of the vehicle - ALU loading ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The vehicle was purchased as a new vehicle by us, i.e. from first ownership. The trailer has been deregistered since 2025.

Stanje: novo, Original Siegmund welding table perforated plate Octagonal, 2D or 3D 1200 x 200 mm with 28 mm holes 514 kg, diameter 1300 mm Plasma-nitrided Original price €8,900 Half price when purchased together with positioner Gjdpfxet Sk Nde Afqstt Sold only in combination with positioner Hole mount: 8 holes, 500 x 500 mm, diameter 18 mm (see photo)

Stanje: dober (rabljeno), Leto izdelave: 2022, Stow Okviri: Godpfeqzhncsx Afqott 9000x1100x100 - 600 kosov - 95 EUR 9500x1100x100 - 200 kosov - 100 EUR 10000x1100x100 - 90 kosov - 105 EUR Nosilci: 2700x130 mm (nosilnost 3000 kg) - 8744 kosov - 11 EUR 3600x160 mm (nosilnost 4000 kg) - 378 kosov - 14 EUR Zaščita nog 890 kosov - 6 EUR/kos

Stanje: novo, ⭐⭐⭐⭐⭐ (5.0) 42 reviews ✈️ Shipping available: 45-day delivery ✈️ ✅✅✅ Energy efficiency class A+++ ✅✅✅ ⚡️ Top service ⚡️ Fast delivery ⚡️ Excellent support! ⭐ €10,850 plus VAT & shipping ⭐ ►►Buy now◄◄ ✳️ Maintain your liquidity! We offer a wide range of financing options to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery times❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ Benefit from Proton's 40 years of expertise in surface coating technologies. ➖➖➖➖➖ ☘️ Environmentally friendly ☘️⚡️ Green energy ⚡️☘️ ⭐ Paint Booth – WETLINE-SP-1500 ✔️ Internal dimensions: 1390 mm L × 1500 mm W × 1400 mm H ✔️ Pool height: 561 mm ✔️ Filter system: Double-layer water curtain ✔️ Filter material: Town water, panel filter, and mechanical separator with backwash ✔️ Filter cleaning: Fine and coarse grating ✔️ Pump output: 1.5 kW/h, 940 rpm, 1 unit ✔️ Number of fans: 1 ✔️ Fan capacity: 5,400 m³/h per unit ✔️ Fan motor power: 3 kW/h Gtodpfjc Uthdsx Afqst ⭐ The booths can be manufactured from galvanized sheet steel or stainless steel. They can be configured for integration in both automatic and manual systems. ⭐ A platform at the pool provides material and personnel safety, covering the entire pool area. ⭐ The filter-line wet paint booth prevents environmental pollution through the simultaneous use of three different filtration systems. ⭐ Wet paint particles drawn in by a suction fan are captured by a water curtain at the rear of the booth and transferred into the pool. ⭐ Trace amounts of wet paint particles not caught by the water curtain are captured by the separators at the suction channels behind the water curtain; clean air exits via the exhaust. ⭐ The backwash system is applied in the separator section to enhance retention of moist paint particles; the filtration efficiency is maximized by increasing the contact surface area via washing water sprayed through nozzles. ⭐ Paint-contaminated water accumulating in the tank is directed to the pump suction chamber, where it passes through coarse and fine filters to prevent blockage of the pump spray water and to ensure paint particles are retained. ⭐ When the waste water in the pool becomes unusable, it can be drained through the discharge valve located behind the sieves in the extraction compartment. ⭐ Using a paint separation system, the water in the tank is cleaned of paint and can be reused continuously. ⭐ Separated paint residues are dewatered by a filter press and must be disposed of professionally. ⭐ The price specified applies to the smallest standard size in stainless steel. All devices/machines are new, not used. Looking for a custom configuration❗ Call us now❗ ☀️ 2-YEAR WARRANTY ☀️ ☀️All our machines have CE certification, and necessary machines are ATEX-certified.☀️

Stanje: rabljeno, Leto izdelave: 2018, Potez potovanja - x 1.050 mm Gedpfx Afjw Dgcaoqjtt Potez potovanja - y 570 mm Potez potovanja - z 510 mm Krmiljenje HEIDENHAIN - TNC620 Hitrost vretena 12.000 vrt/min Orodno vpenjalo BT 40 Dimenzije mize (D x Š) 1300 x 570 mm Število mest v menjalniku orodij 30 Obdelovalni center - vertikalni | DOOSAN - DNM 5700, opremljen s 30-pozicijskim menjalnikom orodij, IKZ hladilnim sistemom in transporterjem za ostružke. Stroj ima samo 13.600 ur vretena. Stroj je lepo vzdrževan in je obdeloval izključno aluminij in plastiko. Video stroja z lokacije tovarne z veseljem delimo na zahtevo. Dodatne tehnične podrobnosti najdete v ponudbi.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, A used CNC gantry milling machine with a C-axis for turning operations (CNC turning, CNC milling, and angle head machining). Boring mill capabilities! Hirth coupling! TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Table diameter: 2,500 mm Max. turning diameter: 3,000 mm Max. turning height: 1,000 mm Machine: Uniport 6000 Boring mill operations, including CNC turning, CNC milling, and angle head machining. All in a single setup, combined with the speed and precision of a CNC gantry milling machine. TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Dimensions Table diameter: 2,500 mm & 2,000 mm Max. turning diameter: 3,000 mm & 2,500 mm Max. turning height: 1,000 mm Gedpovvh R Defx Afqett C-axis for turning operations Original price: €1.8 million Disassembly: by arrangement The machine comes with a protective cover to prevent chips from entering the Hirth coupling on the ram during milling operations. Also included are a turning attachment head for turning tools and an angle head for lateral machining on the plate field or rotary table. The angle head can be swiveled in 2.5° increments via the Hirth coupling. All holders (milling, turning, angle head) use HSK-100 clamping. A wireless probe from M&H (Hexagon) for measurement and reference point setting is included. The machine is in operation and can be inspected on site. A video of the machine is available.

Stanje: rabljeno, Leto izdelave: 2001, Širina udarne stene: 4000 mm Višina udarne stene: 1000 mm Zunanje dimenzije: 4600 x 1500 mm 2 x 1,5 kW motorja Skupni nazivni volumenski pretok: 7000 m³/h Odsesovalni priključki levo in desno s premerom 300 mm Lokacija skladišča: Garbsen Godpfxsvvizko Afqett

Stanje: novo, Thread diameter M3 - M8 mm Electric tapping machines for M3 - M8 threads, angle adjustable. Includes 5 quick-change chucks with slip clutch. Adjustable via display: Variable speed, adjustable depth, material selection, reversible main rotation, thread selection. Optional: - Clamping table with T-slots: 990x700x800mm. Gjdpfxsfg U Sne Afqstt - Magnetic base.