CNC vzmetni stroj

BB Spring (Babbio) CNC 800

Stanje: novo, Strojem za oblikovanje oprug s pogonom na bregasto osovinu Fodpfx Aaomb Uurjmegg

Stanje: novo, Leto izdelave: 2026, Spindle speed continuously variable, electronically controlled: 40–4000 rpm Spindle mount: MT 2 Table height adjustment via rack and pinion Maximum thread cutting capacity: M10 Thread cutting depth setting via digital depth display Digital speed display Digital drilling depth display Drilling depth stop via stop ring Feed/operation: manual Table height adjustment via rack and pinion Continuous/normal drilling capacity in steel: Ø 13 mm / 15 mm Drilling depth: 60 mm Throat: 225 mm Column diameter: 60 mm Usable table surface (W x L): 330 x 250 mm Machine dimensions (W x D x H): 420 x 450 x 860 mm Machine dimensions (with base) (W x D x H): 452 x 700 x 1130 mm Weight: 62 kg Max. distance spindle/table/base: 300 / 360 mm Motor: single-phase AC with frequency inverter, 230 V, 0.54 kW Fodpfx Aasby Swhjmogg OPTION: Drilling package no. 2: - Vice "Felix", jaw width 80 mm, max clamping width 120 mm - Quick-release drill chuck 1–13 mm, mount B16 - Taper arbor MT II/B16 - Reducing sleeve MT II/MT I Price: €320 Factory warranty: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT PARTNER AND CAN OFFER YOU THE FULL RANGE OF FLOTT PRODUCTS! ASK US FOR AN INDIVIDUAL QUOTATION!

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), Cloos welding robot Qirox QRC 320 including V 6 controller, Pedestal for upright installation, Cloos welding machine Quinto II 603 (600 A), wire feeder, welding torch, torch hose package, mechanical cleaning, pressure booster Fodpfoizwv Njx Aamogg 1 rotary tilting table WPK 5000, load capacity 500 kg, 1 pre-selection start, 1 control for customer-supplied sliding door Gas nozzle sensor, arc seam tracking, point editor The system will be completely overhauled and serviced before delivery. A second station with an additional identical rotary tilting table is possible.

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 06007153/001, skupna višina: 6.050 mm, skupna širina: 3.380 mm, skupna dolžina: 3.074 mm, nosilnost na odsek shranjevanja: 210 kg, gradbena višina: 6.050 mm, vhodna napetost: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial No.: 06007153/001 Year of manufacture: 2006 Total Load: 2 x 33,550 kg Load per tray: Medium: 205 kg (evenly distributed) Tray dimensions: 3050 x 864 mm Number of trays: 36 units (more or heavier trays available on request) Shuttle dimensions (W x D x H): 3380 x 3074 x 6050 mm (The height of the Kardex can be adjusted to the available height) Power supply: 3/N/PE 400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid as long as the system is unsold. Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays, Medium: 210 kg each, evenly distributed. More or heavier trays available on request. - Tray dimensions: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 x 6050 mm - System footprint approx.: 10.39 m² Fedpexq Tbtjfx Aamogg - Capacity with 36 trays: approx. 95 m², each tray is approx. 2.64 m² - Electronic volume measurement system in 25 mm increments (grid) - One access opening with sliding doors for safety of personnel and stored goods - Control C2000, with B/W OP2000 display - LED anti-glare lighting above the access point - Use of toothed belt for minimal noise - Use of toothed belt for the fastest order picking - Distances can be set in 25 mm increments by arranging the support profile, a prerequisite for high-density storage - Weight management controls the tray load - Including light pointer Price: On request via email only Price: excl. VAT, including transport and installation Delivery time: from stock Machinehandel De Leeuw BV specializes in used paternoster systems from Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Stanje: novo, Leto izdelave: 2026, - Tfon Leveltech® S-3513 izravnalni stroj. - Tfon Leveltech® S-3513 je precizni izravnalni stroj, optimiziran za izjemno tanke materiale, ki združuje napredno elektromehansko upravljanje z enostavnim upravljanjem za dosledne, visokokakovostne rezultate ravnanja. Fjdjkyrzljpfx Aamsgg - Ključne tehnične specifikacije: Debelina materiala: 0 – 0,3 mm. Največja širina materiala: 1.300 mm Minimalna dolžina materiala: 70 mm Sistem za hitro menjavo ravnalnih valjev: standard. Nastavitev odprtine za izravnavo: elektromehanska / računalniško vodena. Dimenzije stroja (D × Š × V): 2.685 × 1.585 × 1.820 mm. Skupna teža: 5.000 kg.

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Tool Diameter: max. 270 mm Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Hydraulic Motor Power: 3 kW Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW - Pivoting roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame Fjdpeuz If Njfx Aamegg - Operating manual with electrical diagram Space requirements (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, laserska moč: 12.000 W, Opis BAISON V52U(12+12 metrov): (12 ali 20 kW) ŠTIRI-ČELJUSTNI TEŽKONOSNI FIBER LASERSKI STROJ ZA REZANJE CEVI Z AVTOMATSKIM SISTEMOM ZA NALAGANJE IN RAZLAGANJE 12-metrski avtomatski sistem za nalaganje + 12-metrski avtomatski sistem za razlaganje (možna različna konfiguracija, npr.: 12+6 metrov) Stroj je primeren tudi za profile, cevi in različne oblike. Razpon dimenzij cevi: Okrogla cev: φ50-φ500mm Kvadratna cev: □50*50-□500*500mm Fsdpfx Aevcbw Doamjgg C kanal: 5#-50# Kotnik: 200*200mm I-profil: 10#-50# H-profil: 100*100mm-500*500mm Laserska moč 12.000 W (Raycus) Maks. teža posamezne cevi 2.000 kg Hod čeljusti Celoten hod Min. dolžina repa 0 mm Maks. hitrost čeljusti 40 r/min Maks. hitrost 50 m/min Maks. pospešek 0,4 G Maks. dolžina reza cevi 12.000 mm Izjemno kratek repni material 0 mm X-os 500 mm Y-os 12.000 mm Z-os 500 mm Natančnost pozicioniranja (X/Y) ±0,05 mm/m Ponovljivost pozicioniranja (X/Y) ±0,05 mm Podatki o moči 130 kW / 225A Napajanje 380V/50Hz/3 faze Stopnja zaščite IP54 Dimenzije stroja 29.080*5.000*3.250 mm Teža stroja 28.165 kg (vključno s polavtomatskim nalagalnim in avtomatskim razlagalnim sistemom) Konfiguracija: DODATNA OPREMA VKLJUČENA V PONUDBO Laserski vir RAYCUS 12 kW Laserska glava z avtomatskim fokusom – RAYTOOLS BS12K-3D Krmilni sistem – FSCUT 5000A Samocentrirajoče pnevmatske čeljusti Polavtomatski nalagalni sistem z verigo Servomotorji – VEICHI Reduktor – TECHMECH Visoko natančen prenos X/Y s kotalno letevjo in vodili – K.H Vodilna tirnica – SHAC Industrijski sistem hlajenja/ogrevanja laserske glave in vira – Dvojni hladilni sistem HANLI Proporcionalni ventil – AVENTICS Varjena in termično obdelana osnova stroja – BAISON Brezžični daljinski upravljalnik Računalnik z operacijskim sistemom Windows 11, internet & WiFi Centraliziran sistem avtomatskega mazanja Izpušni sistem s centrifugalnim ventilatorjem Priročniki za upravljanje, vzdrževanje in programiranje Stabilizator in regulator napetosti Popolnoma v skladu s CE standardom - Stroji za rezanje cevi in profilov - Fiber laser je zelena tehnologija prihodnosti - (Prihranek vsaj 50% stroškov energije) - Komponente / zato izredno malo vzdrževanja - Prihranite do 50% na del zaradi učinkovitejše proizvodnje - Poleg tega natančni rezi in gladka površina - Trdno izdelan okvir - Opremljen s svetovno priznanimi, vzdržljivimi, visokokakovostnimi komponentami - Opcijsko: Svetlobna pregrada za varnostno zaščito - Popolnoma v skladu s CE standardom Cena je EXW (evropsko skladišče), vključuje nakladanje na tovornjak. Prevoz, montaža, zagon, usposabljanje in letni servisni pogodb so na voljo po dogovoru za doplačilo. Montažo in usposabljanje vedno opravi naša visoko usposobljena servisna ekipa na treh lokacijah v Evropi: Nizozemska, Nemčija, Romunija. Uradni prodajalec CNC Top Ten bv Coevorden, Nizozemska

Stanje: rabljeno, Leto izdelave: 2012, številka stroja/vozila: A0100-80069, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 4.660 h, Oprema: dokumentacija / priročnik, Ponujamo uporabljeni stroj za litje elastomerov Hennecke ELASTOLINE F, letnik izdelave 2012. Fgodpsx R Thcofx Aamsg Stroj je v dobrem rabljenem stanju. Za vprašanja ali dodatne informacije nas lahko kontaktirate pisno ali po telefonu.

Stanje: novo, Leto izdelave: 2012, Expandable Mandrel Decoiler Fgjdpswzu E Dsfx Aamog Type: MH 4/1500 Strip Width: max. 600 mm Strip Thickness: max. 3 mm Coil Weight: max. 4 t Coil Outer Diameter: max. 1,500 mm Mandrel Diameter: 508 mm Year of Manufacture: 2012 (never used)

Stanje: dober (rabljeno), Leto izdelave: 1990, številka stroja/vozila: V 254326, Offer 22407 Technical Specifications: - Cutting length: 250 mm - Cutting angle: 90 ° - Cutting capacity: - Mild steel, up to: 4 mm - Stainless steel, up to: 3 mm - Aluminium, up to: 5 mm - Stroke rate: up to approx. 55 /min - Table size: W 800 x D 800 mm - Working height approx.: 940 mm - Stops infinitely adjustable in length and angle - Drive: 400 V / 4 kW - Oil capacity: 50 l - Electric foot switch - Space requirement approx.: W 800 x H 1250 x D 900 mm Fgjdpfsif Aqvsx Aamjg - Weight approx.: 700 kg