Razkladalnik za pilote

Baumann BA 6

Stanje: rabljeno, Leto izdelave: 1991, številka stroja/vozila: 6172025, Pallet hoist with tray / Pile hoist - Stack Lift Polar L-1000-W-3 Gtodpfx Ajn Aw Ugob Eow Year of manufacture: 1991 - Serial No.: 6172025 Format / Maximum size: 1100 x 750 mm Lifting capacity: max. 1000 kg Lifting height: max. 1400 mm Online video inspection via Skype video available. We would be delighted to welcome you for an on-site visit – more machines in stock. Immediately available – Can be inspected Located in Emskirchen / Nuremberg – Can be tested on site.

Stanje: dober (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Bobst SP 142 ER Year: 1987 Max. sheet size: 1020 x 1420 mm Min. sheet size: 700 x 520 mm Gtedpfxevhcgqo Ab Esw Max. speed: 6,000 sheets/hour Max. cutting force: 600 t Centerline system Micrometric adjustment Currently in production

Stanje: rabljeno, Leto izdelave: 1997, številka stroja/vozila: 97989, Folding knife unit - Mobile Folding Knife Stahl VFZ 52.D Four-directional folding unit - Four-panel folding machine Year of manufacture: 1997 - Serial No. 97989/97-255056 Minimum sheet size: 120 x 100 mm - Maximum: 520 x 360 mm Maximum speed: 160 m/min Maximum cycle rate: 30,000 cycles/hour Infeed height: 515 - 915 mm Online video inspection via Skype video We would be pleased to welcome your visit – more machines in stock Available immediately – Inspection possible Gjdoll A Tispfx Ab Eetw In stock at Emskirchen / Nuremberg – Test run possible

Stanje: rabljeno, Leto izdelave: 1981, številka stroja/vozila: 5171754, Pallet Lifter / Pile Hoist - Stack Lift Polar Mohr HL 600 Gedpfsh Ax T Tjx Ab Estw Year: 1981 - Serial No.: 5171754 Maximum Format / Size: 1100 x 800 mm Maximum Loading Capacity: 600 kg Maximum Lifting Height: 1000 mm Equipped with light barrier for automatic lifting of cut material (paper) Online video inspection via Skype possible We would be pleased to welcome you for an inspection – more machines available in stock Available immediately – can be inspected In stock in Emskirchen / Nuremberg – test run possible

Leto izdelave: 2006, stanje: dober (rabljeno), Agfa chiller (cooling system) for Agfa and Screen CTP systems. Gtedpfx Aodtr A Tjb Eow Tested and inspected,

Stanje: rabljeno, Leto izdelave: 1988, Bobst Flexo 1604 Printing Press, 4 bottom printing units, anilox cylinders 120 l/cm and 80 l/cm Bobst Transfer Unit BOBST SPO 1600 FLATBED DIE-CUTTER, maximum format 1100 mm x 1600 mm / 43.3" x 63", with 4 printing units plus bottom printing, conventional roller feeder - Anilox cylinders: 120 l/cm and 80 l/cm - Open steel chambered doctor blade - Vacuum feeder - Die-cutting section - Waste removal section Gtsdpfxsv Ifpuo Ab Esw - Centerline II - High-pile delivery with two elevating tables - Maximum sheet size: 1100 mm x 1600 mm / 43.3" x 63" - Minimum sheet size: 520 mm x 600 mm / 20.5" x 23.6" - Die-cutting force: 400 t - Materials: E, B, C, CB, BE flutes - Maximum speed: 6,000 sheets/hour Machines can be sold separately.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, ITU evaluation device Paper scale Gjdpfx Abegz Imus Ejtw Citizen 910 printer PIO signal output - for use with paper joggers - The scale must be zeroed with the jogger

Leto izdelave: 1988, stanje: dober (rabljeno), številka stroja/vozila: 11801, Gietz FSA 720 Folie-/Prägestanzpresse. Format 720x520 mm, minimale Bogen­größe 297x210 mm, Doppelbogenkontrolle, Presskraft 120 t, maximale Geschwindigkeit 5.000 Bogen/h, Stapelhöhe 950 mm bei maximal 700 kg, Stapelhöhe am Ausleger 700 mm, Maschinenabmessungen 380x280x195 cm. Maschinennummer: 11801 Gtedpfx Abjwnqrgs Eow

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, skupna masa: 52.000 kg, prebijalna sila: 600 t, potrebna višina: 3.520 mm, zahteva za prostor dolžina: 12.150 mm, potrebna širina: 9.340 mm, Machine for Die-Cutting, Embossing, Waste Stripping and Blank Separation Used machine, factory-refurbished by QTM Schwalmtal System equipped with high-performance sheet feeder for NON-STOP operation ⦁ For fully automatic die-cutting, creasing, and embossing with or without gripper edge ⦁ For internal waste stripping as well as stripping of side and rear sheet edges ⦁ For stack-wise delivery of die-cut and stripped sheets with remaining gripper edges, or ⦁ For separation of gripper edges and subsequent stack-wise delivery of the residual sheets ⦁ With patented gripper carriage register system for highest registration accuracy ⦁ With bundle stacker enabling fully automatic separator sheet feeding and NON-STOP delivery, even for smallest cut sizes without requiring changeover (exchange table with comb structure) ⦁ Separator sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device in the delivery section ⦁ Modem ⦁ Standard machine height extension 600 mm Specification Max. sheet size: 1060 x 1450 mm Min. sheet size: 500 x 700 mm Max. die-cutting force: 6.0 MN (600t) Speed: 8,000 sheets/h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 5 mm (max. sheet warp 4%) Gtodpfx Abjt E Nthe Ejw Equipment: Patented QTM rail system Manual non-stop feeder Stripping station Blank separation station Centerline Fully automatic pallet change device in delivery section Including platform Control system upgraded to Siemens S7 Completely overhauled machine drive Quick-action clamping frames in all tooling stations

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) Godpfog Ezarsx Ab Ejtw - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.