Hidravlična črpalka 500 barov

Bauknecht 500 bar

Leto izdelave: 1996, Stanje: dober (rabljeno), številka stroja/vozila: 96.01112.1496, Stationary high-pressure pump unit Hammelmann HDP 112 mounted on a base frame. Comparable to, but not a Kamat, Uraca, or Woma unit. Fsdpfx Ajhtnnijfljft Pump type: HDP 112 Operating pressure: 300 bar Flow rate: 153 l/min Drive speed: 1500 rpm Drive power: 90 kW Equipped with VEM Motor 90 kW 3~ motor, IP55 Includes pressure regulating valve Includes safety valve Includes oil cooling system Dimensions (LxWxH): approx. 2300 x 1000 x 1400 mm Weight: approx. 1500 kg Year of manufacture: 1996 Condition: in good used condition.

Leto izdelave: 2003, Stanje: dober (rabljeno), Weishaupt Gas Burner-Monarch Burner Type: G7/1-D Design: ZMD Output: 300 - 1750 kW Including gas train (gas valve assembly) Ffsdpfx Aomdpczoflet Burner was recently in operation

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with New 3-Axis FPS Aktiv Digital Readout (Heidenhain) | General Overhaul by FPS 2015 | Like-New Condition Technical Data: • Year of manufacture: 1980 | Machine No. 2201-5045 • Fixed angle table • Spindle speed: 25 - 2,500 rpm • Infinitely variable feed rate on all 3 axes • Rapid traverse on all 3 axes • Motor power: 2.0 / 4.0 kW • Spindle brake • Travel (X/Y/Z): 500 / 300 / 400 mm • Vertical milling head movable on spindle head by 200 mm • Extendable vertical and horizontal quill – SK40 • Drawbar system M16 • Weight: approx. 1,500 kg Ffsdpfx Afsu Dm E Holet Equipment and Accessories: • 3-axis Aktiv Digital Readout (Heidenhain, latest version) • Coolant system • Central lubrication system About the Machine: Offered is a Deckel FP3 universal milling machine in like-new condition. The FP3 was completely overhauled by FPS in 2015 and has seen little use since then. The machine has minimal backlash and all spindles move smoothly. This newer FP3 model features infinitely variable feed rate on all three axes, as well as rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With the Heidenhain position control, you can enter target dimensions which the machine automatically travels to. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power at our location. The machine is available immediately.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, proizvajalec motorjev: VEM, moč: 110 kW (149,56 KM), volumenski pretok: 679 m³/h, Rabljeni amonijačni kompresor Sabroe TSMC - 116 S. Hlajenje z vodo, dobro vzdrževan, v delujočem stanju, zamenjan zaradi namestitve novega kompresorja Sabroe. Hladilna zmogljivost približno 100 kW (-20°C). Upravljan s krmilnikom Carell, ki ga je mogoče vključiti po želji. Ffedpfxjuq Hnys Aflot Motor 110 kW. Nekateri originalni deli bodo prav tako priloženi. Kompresor je bil uporabljen pri proizvodnji maščobe/margarine. Običajno je deloval pri sesalnem tlaku 0,1–0,2 BAR, kar je pomenilo temperaturo izhlapevanja (T₀) -25°C in temperaturo kondenzacije (Tₖ) +35°C, z zmogljivostjo kompresorja okoli 100 kW. Kompresor lahko deluje tudi pri nižjem sesalnem tlaku za doseganje nižjih temperatur, na primer med -30°C in -35°C.

Leto izdelave: 2016, Stanje: novo, 1 piece of factory-overhauled, unused industrial bevel helical gearbox by ASUG, TGL 21815. All gearbox components have been replaced, except for the housing! Claw coupling: 800 mm (only one half available) Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Ffedegwlrdepfx Aflst Oil fill: 170 kg Input speed (n1): 1400 rpm Output speed (n2): 17.5 rpm Weight: 1,450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925 mm Base length: 1,170 mm !! Gearbox is supplied WITHOUT oil cooler !!

Leto izdelave: 1995, Stanje: zelo dobro (rabljeno), 3 kos centrifugalnih črpalk Sulzer MB 40-160/5 Pretok: 32 m³/h Ffsdpfxjd Sybpo Aflot Dvižna višina: 147 m Najv. temperatura: 130°C Tesnilo: drsno tesnilo z zaporno vodo Pogon: Siemens 22 kW Obrati: 2950 obr./min ! Cena na kos !

Stanje: skoraj kot novo (rabljeno), Manufacturer: Flender Model: K2S-2,5 Backstop: Yes Power: 78 kW Gear Ratio: 44.16:1 Input/Output Speed: 1,400 / 31.7 rpm Input Shaft Diameter: 65 mm Output Shaft Diameter: 140 mm Ffjdog Stz Ajpfx Aflot

Leto izdelave: 1990, Stanje: rabljeno, Material: Mild steel Drive motor: 55 kW Dimensions: approx. L 1600 mm x W 1000 mm x H 900 mm Unladen weight: approx. 1500 kg Delivery rate: 14.4 m³/h Max. operating pressure: 100 bar Technical documentation: No Fedpfxsgb D Iro Aflsft Note: Piston diameter: 57 mm, Stroke rate: 326 1/min, Stroke length: 105 mm

Leto izdelave: 1989, Stanje: dober (rabljeno), Good condition, with connection for sealing water. Delivery head: 86 meters / 8.6 bar Flow rate: 600 m³/h Fsdpjc Iu Uiefx Afleft Speed: 1,450 rpm Drive power: 190 kW Can also be used as a turbine!

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 42 mm, višina središča: 165 mm, širina na sredini: 635 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 30 obr/min, skupna masa: 900 kg, Dear Sir or Madam, Fedpeu St S Aofx Afloft For sale is a Colchester Master 2500 lathe equipped with a Heidenhain digital readout. The machine is fully functional and can be inspected and tested on site. Availability: immediately Centre distance: 635 mm Centre height over bed: 165 mm Centre height over cross slide: 105 mm Spindle bore: 42 mm Spindle speed: 30 - 2500 rpm, 16 steps Tailstock taper: MT 3 Drive power: 3.7 kW Required floor space (LxWxH): 1700 x 880 x 1200 mm Weight: approx. 850 kg