Stroj za brizganje

Battenfeld TM 4500/2800

Stanje: dober (rabljeno), Leto izdelave: 1999, Dvoranski žerjav, žerjav, električni vitel, ročni pogon, ročni voziček, žerjavna mačka, voziček za mačko, voziček za žerjav, voziček za vožnjo, voziček za nosilec, voziček za visečo progo. - Proizvajalec: Stahl, voziček za žerjav z električnim vitlom - Vitel: tip AS 3016-16 2/1 - Nosilnost: 3.200 kg - Glavno dvigovanje: 8 m/min - Fino dvigovanje: 1,35 m/min - Pogon vožnje: FA-C 3728 133-1 - Hitrost vožnje: 5/20 m/min - Razmik med kolesi: 1.400 mm, mere glejte slike - Hitrost bobna: 16,0 / 4,0 m/min - Količina: 1 kos vozičkov za žerjav na voljo - Cena: za kos - Transportne mere: 1670/1200/V470 mm Gjdpotlzdqsfx Ab Eotw - Teža: 462 kg/kos.

Leto izdelave: 1993, stanje: pripravljen za uporabo (rabljen), A total of six used injection moulding machines with various accessories from Arburg and Engel are available. 1) Engel ES80/35, year of manufacture: 1992, clamping force: 350 kN, injection pressure: 1,500 bar, shot weight: 35 g/PS, screw diameter: 22 mm, centering hole diameter: 110 mm, mould opening stroke: 330 mm, control unit: defective. 2) Arburg 305 ECO 700-230, year of manufacture: 1989, clamping force: 700 kN, screw diameter: 40 mm, centering hole: 125 mm, mould height min./max.: 190 mm/420 mm, tie bar distance X/Y: 305 mm/135 mm, mould opening stroke: 250 mm, control unit: defective. 3) Arburg 305-210-700, year of manufacture: 1982, clamping force: 700 kN, injection pressure: 1,500 bar, shot weight: 117 g/PS, screw diameter: 35 mm, centering hole: 125 mm, mould height min./max.: 200 mm/400 mm, tie bar distance: 305 mm. 4) Arburg 221-75-350, year of manufacture: 1992, clamping force: 350 kN, injection pressure: 1,500 bar, screw diameter: 22 mm, centering hole: 110 mm, mould height min./max.: 150 mm/300 mm, tie bar distance: 221 mm. 5) Arburg 221-55-250, year of manufacture: 1991, clamping force: 250 kN, shot weight: 32 g/PS, screw diameter: 20 mm, mould height min./max.: 150 mm/300 mm, tie bar distance: 320 mm. 6) 2-component injection moulding machine Arburg 221-75-350, year of manufacture: 1993, clamping force: 350 kN, injection pressure: 1,500 bar, shot weight: 38 g/PS, screw diameter: 22 mm, mould height min./max.: 150 mm/300 mm, tie bar distance: 221 mm. Included: 7-8 Arburg dryers, various injection units, AirComp compressor, liquid silicone mixing unit with Arburg control and Scheugenpflug. Documentation available. Inspection on site is possible. Gtsdpfx Abevb Hbfe Esw

Stanje: novo, Cutting Range: round 0°: 270 mm square 0°: 260 x 260 mm flat 0°: 320 x 260 mm round 45° right: 230 mm square 45° right: 220 x 220 mm flat 45° right: 230 x 150 mm round 60° right: 140 mm square 60° right: 140 x 140 mm round 45° left: 200 mm square 45° left: 175 x 175 mm flat 45° left: 220 x 150 mm Cutting Speed: 40 / 80 m/min Saw Blade: 2925 x 27 x 0.9 mm Working Height: 975 mm Coolant Pump: 100 W Saw Motor: 1.9 kW Voltage: 400 V Dimensions LxWxH, approx.: 2000 x 1300 x 2000 mm Weight, approx.: 550 kg Features: - Double miter bandsaw with swiveling saw bow from left -45° to right +60° - Ideal for cutting pipes, profile material, and solid stock made of stainless steel, iron, etc., for industrial/commercial use - Generously sized cast saw arm for low-vibration operation - Two blade speeds for optimal adjustment to the workpiece - Hydraulic lowering cylinder - Quick-release vise for fast and easy clamping of the workpiece - Precise, adjustable blade guides for optimal cutting results - CE/IEC compliant, German documentation and German service Scope of Delivery: - Bi-metal saw blade 2925 x 27 x 0.9 mm - Blade tension adjustable via pressure gauge - Carbide blade guides Gtsdpfx Asiqt Rljb Esw - Quick-release vise - Material stop - Coolant system with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic shutdown at end of cut - Base frame

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Clamping force: 500 t Screw diameter: 80 mm Shot weight: 1620 g Tie bar spacing (vertical): 900 mm Tie bar spacing (horizontal): 900 mm Shot volume: 1779 cm³ Gtedeva H Amjpfx Ab Eow Injection pressure: 1855 bar Platen dimensions: 1300 x 1200 mm Type: Horizontal Drive: Hydraulic

Stanje: rabljeno, Drilling capacity in steel (diameter) / mm Throat depth / mm Workpiece height - max. / mm Total power requirement / kW Gtjdpfx Absud Ttno Ejw Machine weight approx. / t Space requirement approx. / m Table dimensions: 800x800 mm Height: 590 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Demag System 800/1120–9500 Injection Moulding Machine Year of manufacture: 2008 Additional equipment: Injection moulding machine equipped with a robot Clamping unit Parameter Value Clamping force 8,000 kN Platen dimensions (W × H) 1,620 × 1,500 mm Tie bar spacing (W × H) 1,120 × 1,000 mm Gedpjwy U E Uofx Ab Eotw Min. / max. mould height 500 – 1,050 mm Max. distance between platens 2,080 mm Mould opening stroke 1,030 mm Ejector stroke 350 mm Ejector force 139 kN Max. mould weight 7,200 kg Injection unit Parameter Value Screw diameter 130 mm Shot volume 7,300 cm³ Shot weight (for PS) 6,640 g Injection pressure 1,300 bar L/D ratio (screw length/diameter) 20 Electro-hydraulic equipment Parameter Value Pump motor power 110 kW Heater power 79 kW Oil tank capacity 1,300 litres Dimensions and weight Parameter Value Machine dimensions (L × W × H) 12.3 m × 2.7 m × 2.7 m Total weight 33,500 kg (main unit) / 9,700 kg (accessories)

Stanje: dober (rabljeno), Leto izdelave: 1984, Overhead crane, crane, electric wire rope hoist, manual trolley, geared trolley, crane crab, crab trolley, crane driving unit, crane trolley, trolley, girder trolley, suspension track trolley - Manufacturer: Abus, crane trolley with electric wire rope hoist - Hoist type: GM1032FD - Lifting capacity: 3,200 kg - Main/precision hoisting speed: 5/0.7 m/min - Hook path: 6.0 m - Wheelbase: 1,400 mm, dimensions see photos - Travel drive: Abus - Accessories: Connection cables, without crane control Gtjdpfx Abou I Hpaj Eow - Transport dimensions: 1,550 x 1,180 x H530 mm - Weight: 512 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Injection moulding machine Godpfx Ajfx Tztsb Eetw With two components KraussMaffei Multiinject KM200-1000-390 CZ Year of manufacture: 1998 Clamping force: 200 t Screw diameter: 60 mm - 566 g Second screw: 35 mm - 178 g Tie bar spacing: 560 x 560 mm

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 62.235 h, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 70 mm, skupna masa: 25.100 kg, The ENGEL Victory 2050/350 is a tie-bar-less injection moulding machine, manufactured in 2005. With a machine weight of 25,100 kg, it offers a maximum shot volume of 1,145 cm³ and a maximum injection pressure of 1,482 bar. The clamping force is 350 tonnes, and the screw diameter is 70 mm. Key technical data: - Year of manufacture: 2005 - Machine weight: 25,100 kg - Maximum shot volume: 1,145 cm³ - Maximum injection pressure: 1,482 bar - Clamping force: 350 t - Screw diameter: 70 mm - Mould installation height: 350–1,000 mm - Platen size: max. 1,200 x 1,100 mm - Ejector stroke: max. 250 mm - Control system: ENGEL - Total operating hours: 62,235 h - Additional equipment: - MORETTO Hopper Loader R10 C52 - ENGEL ERC linear handling system - Longitudinal arrangement - Extraction cell with machine enclosure - Carton board feed - Two-stage roller conveyor The tie-bar-less design of the ENGEL Victory series allows free access to the mould area, enabling the use of larger moulds on smaller machines and thus increasing efficiency. This layout also offers advantages for automation, as robots and peripheral equipment can be integrated more easily. The machine is equipped with the ENGEL control system, renowned for its intuitive operation and precise process management. The servo-hydraulic technology ensures energy-efficient operation and reduces cooling water requirements. Additionally, the machine is fitted with a MORETTO dosing unit and an ENGEL linear handling system, supporting production automation and increasing overall productivity. Godpfx Abjvxzw No Ejtw With a total of 62,235 operating hours, the machine is in used but operational condition.

Leto izdelave: 1984, stanje: generalkompletno obnovljen (rabljeno), Druck: 200 t Tisch verstellbar (auf/ab): 1130 x 860 mm Hub: 250 mm Lichte Weite: 500 mm Gtodpfxedzp Ezo Ab Eew