30.000 litrski rezervoar za dizelsko gorivo / rezervoar za kurilno olje

BARTH

Stanje: generalkompletno obnovljen (rabljeno), Firefighting Water Tank according to DIN 14230 (Underground Firefighting Water Tank): 100,000-litre firefighting water tank for underground storage, single-walled, equipped with 1 manway DN 600 complete with blank cover, gasket and bolts. External surface with bitumen insulation - used - Tank volume: 120,000 litres / 120 m³ Length: approx. 16,500 mm Diameter: approx. 3,100 mm Weight: approx. 3,100 kg Material: Steel, grade S 235 JRG 2 The tank is fitted with a firefighting water suction connection in accordance with DIN 14244, including a pre-installed Storz fire brigade coupling (A type) according to DIN 14319, design type B, without dip tube. Additionally, the tank is equipped with a vent flange (NW/DN 100) with cap, total length approx. 1,300 mm, suitable for 800 mm earth coverage and 500 mm above ground level. - The tank has been emptied, cleaned, and given a bitumen exterior coating in our workshop. Bdjdpfx Aefn Rddopnoi On request, we can fit the tank with a full interior coating based on bitumen (for corrosion protection) or with an epoxy resin interior coating. Affordable delivery with our own truck can be offered. Please share the delivery address and we will promptly provide the exact freight costs. An inspection is possible at any time by prior appointment. If you require any further information, please do not hesitate to call us or email us at b.barth(at)barth-tank.de. We also accept trade-ins and purchase used tanks/containers – feel free to contact us for details. We always stock similar tanks in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000, 100,000 litres

Stanje: kot nova (razstavni stroj), Leto izdelave: 2011, Used steel storage tank according to EN 12285-1 (with test certificate), double-walled, suitable for underground storage of heating oil and diesel fuels, 1 manhole (optionally also available with 2 manholes). Capacity: 100,000 litres Diameter: 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg Bjdpfx Apoi Enxdsnjdi Additionally, we can equip our tanks with the following accessories: - Leak detection system with under- and overpressure leak indicators - Manhole shaft with shaft cover, available in walk-on or drive-over versions - Partition walls (for multi-chamber tanks) - Internal coatings (e.g. two-component epoxy resin), partial or full lining - Content and level measurement instruments as well as control and regulation technology - Electric tank heaters - Pumps for heating oil, diesel, biodiesel or petrol - Fuel dispensers for diesel, biodiesel and petrol – optionally with complete tank data acquisition - External tank insulation with PU foam The tank is internally cleaned, and the external coating has been overhauled and tested at 14 kV. Cost-effective delivery with our own truck possible. Simply inform us of the delivery location and you will receive an immediate quote for exact freight costs. Should you require further information, simply call us or send us an email. Trade-in and purchase of tanks/containers possible, please feel free to contact us regarding this. Delivery time by arrangement! We always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 litres

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, S modelom RFM 320 podjetje BARTH ponuja brusilni stroj, s katerim je mogoče hitro in v najvišji kakovosti v enem prehodu obdelati faze do 16 mm širine. Kratek čas priprave zagotavlja, da se tudi posamezni izdelki izdelujejo hitro. RFM 320 ima oscilacijo brusilnega pasu s pnevmatskim čiščenjem pasu. Osnovna oprema RFM 320: Nastavljivo brusilno orodje za 8 radijev (2, 3, 4, 5, 6, 8, 10 in 12,5 mm) Naprava za brušenje faz do 16 mm širine Oscilacija brusilnega pasu s pnevmatskim čiščenjem pasu Integrirano podnožje za napravo za podajanje 16A vtičnica za napravo za podajanje Priključek za sesanje Ø 80 mm Podvozje z 2 zavorama na kolesih Podpora za obdelovanec, 380 mm razširjena širina Predrezalni agregat 1.100 W / 220 V Stopenjsko regulirano do 25.000 vrt/min Območje rezanja do radija 12,5 mm CE Dimenzije (D x Š x V) v mm: 1.600 x 690 x 1.010 Bedpez Uhgdofx Apnjdi Teža: 207 kg vključno z mnogimi NOVIMI brusilnimi pasovi Opomba: Rabljenih strojev • Pridržujemo si pravico do sprememb tehničnih podatkov in do napak. • Navedene cene veljajo kot cene ob prevzemu na našem sedežu – brezplačno nakladanje! • Stroj je bil očiščen in preizkušen. • Vsi stroji se prodajajo v stanju, v katerem so, brez kakršnih koli garancij. Kupec lahko stroj pregleda na našem sedežu. • Posebni dogovori so možni samo v pisni obliki. (Na povpraševanja bomo odgovorili samo, če navedete svoj naslov in telefonsko številko!)

Stanje: generalkompletno obnovljen (rabljeno), Rezervoar za gasilno vodo po standardu DIN 14230 (podzemni rezervoar za gasilno vodo): 100.000-litrski rezervoar za gasilno vodo za podzemno shranjevanje, eno- ali dvostenski, 1 luknja za dostop DN 600 s pokrovom, vključno z tesnilom in vijaki, zunanja bitumenska izolacija – rabljeno – Prostornina rezervoarja: 100.000 litrov / 100 m³ Dolžina: približno 15.750 mm Premer: približno 2.900 mm Teža: približno 11.600 kg Material: jeklo, vrsta S 235 JRG 2 Rezervoar ima priključek za sesanje gasilne vode po standardu DIN 14244 z nameščeno hidrantno/stalno spojko A po standardu DIN 14319, izvedba oblika B, brez merilnega nastavka. Poleg tega ima rezervoar odzračevalni priključek z navojem NW/DN 100 z zaščitno kapo, skupne dolžine približno 1.300 mm, primeren za 800 mm zemeljske prevleke in 500 mm nad zemljo. - Rezervoar je izpraznjen, očiščen in tovarniško obdelan z bitumensko zunanjo prevleko. Na zahtevo lahko rezervoar opremimo z notranjo prevleko na bitumenski osnovi (proti koroziji) ali z epoksidno notranjo prevleko. Z veseljem vam ponujamo stroškovno ugoden prevoz z našim lastnim tovornjakom. Preprosto nam sporočite naslov dostave, takoj vam bomo posredovali natančne stroške prevoza. Ogled je možen kadarkoli po predhodnem dogovoru. Če potrebujete dodatne informacije, nas pokličite ali nam pošljite e-pošto na naslov b.barth(at)barth-tank.de. Možna je tudi prevzem in odkup rezervoarjev. Seveda imamo na zalogi tudi takšne rezervoarje v naslednjih velikostih: Bdjdpfx Apsi Enwvsnoi - 10.000, 13.000, 16.000, 20.000, 25.000, 30.000, 40.000, 50.000, 60.000, 80.000, 120.000 litrov.

Stanje: generalkompletno obnovljen (rabljeno), 60 m³ / 60,000 L Firefighting Water Tank According to DIN 14230 Tank volume: 60,000 litres / 60 m³ Length: approx. 12,680 mm Diameter: approx. 2,500 mm Weight: approx. 9,500 kg Material: Steel, grade S 235 JRG 2 Underground tank for subterranean storage, single- or double-walled, suitable for pedestrian and drive-over areas (load class SLW 30) with 1 manhole (external diameter 720 mm), equipped with blank cover, gasket and bolts. Available immediately either new or used! The tank is emptied, cleaned, refurbished and professionally leak-tested by our certified workshop. The tank complies with the requirements of DIN 14230 (Underground Firefighting Water Tank): - Firefighting water suction connection in accordance with DIN 14244, fitted with a fire brigade coupling / fixed coupling type A as per DIN 14319, design type B, without level gauge - Ventilation flange nozzle NWN 100 with cap, overall length approx. 1,300 mm, suitable for 800 mm underground coverage and 500 mm above ground - Exterior protected by bitumen coating - Upon request, we can provide an internal full lining with bitumen-based or epoxy resin coating (for corrosion protection) - It is also possible to fit the tank with an internal plastic liner Cost-effective delivery with our own truck is available. Simply provide your delivery location and you will immediately receive the exact freight costs. Inspection by appointment is possible at any time. Bjdpfxehh Srus Apnedi If you need further information, please call us or send an e-mail to b.barth(at)barth-tank.de We also accept trade-ins and purchase tanks/containers of all kinds. Please contact us for details. We always have tanks of similar types in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 litres

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 30.000 l, skupna višina: 7.200 mm, notranji premer: 2.500 mm, zunanji premer: 2.900 mm, skupna masa: 6.000 kg, debelina stene: 10 mm, stenska struktura: enoslojni, Število komor: 1, premer odprtine jaška: 600 mm, tlak (maks.): 3 letvica, Buffer Tank – 30,000 L, Vertical, Insulated Volume: 30,000 liters Internal diameter: approx. 2,500 mm External diameter (with insulation): approx. 2,900 mm Cylindrical height: approx. 5,520 mm Total height: approx. 7,200 mm Empty weight: 6,000 kg Bjdpexdknkofx Apnedi Operating pressure: +3.00 bar Operating temperature: -10 / +900°C Medium: Water Density: 1,000 kg/m³ Bottom plate wall thickness: approx. 11 mm Shell/cylinder wall thickness: approx. 10 mm Material / Properties Shell material: P265GH / S235JR Insulation: 200 mm mineral wool Cladding: Smooth aluminium sheet (weatherproof) Mineral wool insulation will be newly applied, so the insulation thickness can be freely chosen. Equipment Mounting type: Feet Number: 4 Attachment: fixed Top head type: Dished end (Klöpperboden) Bottom head type: Dished end (Klöpperboden) Connections: 1 manhole DN 600 with blind cover 7 x 1/2'' socket for temperature sensors 2 lifting lugs in the shell area 2 lifting lugs on the top head 2 lifting lugs on the vessel feet 1 drain 2'' at the vessel bottom, routed outside and terminating in a 2'' ball valve 1 vent Ø33.7 x 3.6 mm, routed downwards inside the insulation at the side of the tank and terminating at the manhole cover cap 1 connection DN 125, externally ends in flange, internally terminates in 90° bend at the vessel center 1 connection DN 125, externally ends in flange, internally terminates in 90° bend at the vessel center Documentation: Drawing

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 800 h, moč: 5,5 kW (7,48 KM), prva registracija: 12/2025, barva: siv, Suho seno, biomasa ali sušilni zabojnik z nastavljivo količino zraka, namesto da ventilator deluje na polno moč in plačujete za to. Ta Karl Barth AG Ventomat SE-1-100-4p je bil kupljen decembra 2025 in je bil v uporabi približno štiri mesece. Deluje brezhibno in se prodaja kot popoln, funkcionalen komplet, ne samo ventilator: tovarniško konfiguriran 5,5 kW Invertek Optidrive E3 frekvenčni pretvornik z odklopnim stikalom, prehodni stožec in redukcija, plus brezplačna 10 m Ø400 mm tkanina cev. Nova cena približno 8.507 CHF. Na voljo je samo en kos – prodaja se kot celoten komplet s pretvornikom, dodatki za kanale in cevjo. Ko je prodan, ga ni več. Najbolj primeren za: sušenje sena, sušenje biomase, sušilne zabojnike in kmetijsko prezračevanje, kjer želite nadzorovati pretok zraka in ne delovati na polno moč. Ni primeren za: korozivne ali močno prašne zračne tokove ali ATEX cone, razen če je neodvisno potrjeno. Kaj pomenijo specifikacije v praksi: • 5,5 kW motor, 4 kW nazivna moč ventilatorja – prilagojeno za neprekinjeno sušenje sena/biomase, ne za kratkotrajno delovanje. • Tovarniško konfiguriran Invertek Optidrive E3 pretvornik – nastavitev pretoka zraka glede na pridelke in njihovo vlago, kar zmanjšuje porabo energije. • Pretvornik v ohišju IP66/NEMA4X z odklopnim stikalom – nameščen lahko v prašnem hlevu brez ločene nadzorne omare. • Prehodni stožec 222/563 na D400 mm in redukcija D750/D600 mm – priključek na obstoječe kanale, ni potrebe po prilagoditvah. • 10 m Ø400 mm fleksibilna tkanina cev v kompletu – ventilator lahko postavite, kamor se prilega, cev pa usmerite, kamor je potrebno. • Barvana pločevina, švicarska izdelava z enosmernim sesalnikom (Karl Barth AG) – lahko vzdrževanje in lokalna podpora. Celoten paket vključuje: ventilator Ventomat, Invertek Optidrive E3 5,5 kW pretvornik z odklopnim stikalom, prehodni stožec 222/563 na D400, redukcija kanala D750/D600 s priključno obrobo in 10 m Ø400 mm tkanina cev brez dodatnih stroškov. Nakup/konfiguracija samega pretvornika predstavlja bistveno dodatno strošek. Tehnični podatki: – Proizvajalec: Karl Barth AG, Dättlikon (CH) – Tip: Ventomat SE-1-100-4p Bsdpfx Aszrzizopnedi – Nazivna moč: 4 kW – Motor: 5,5 kW, 4-polni – Izvedba: Barvana pločevina, enosmerno sesanje – Pretvornik: Invertek Optidrive E3, ODE-3-340140-3F4B, 5,5 kW, IP66/NEMA4X – Vhod pretvornika: 380-480 V, 3-fazni, 17,2 A – Izhod pretvornika: 0-480 V, 3-fazni, 14,0 A, 7,5 HP – Priključek kanala: 222/563 mm na D400 mm, plus redukcija D750/D600 mm Stanje: Komaj uporabljen (~4 mesece), tehnično brezhiben, popolnoma funkcionalen. Nova cena (december 2025) 8.507,45 CHF, vključno z DDV. Lokacija: Stanserstrasse 50, 6064 Kerns (osebni prevzem, dostava po dogovoru). Kupujte z zaupanjem: kupljeno decembra 2025, uporabljeno ~4 mesece za sušenje sena/sušilni zabojnik, tehnično brezhibno. Pretvornik je mogoče demonstrirati med delovanjem pod obremenitvijo; na voljo so fotografije ploščice in video posnetek delovanja. Osebni pregled v Kernsu OW po dogovoru. Zakaj kupiti zdaj: skoraj nov, tovarniško konfiguriran švicarski sistem, prodaja se kot celoten komplet – ventilator, pretvornik, stožec, redukcija in cev ostanejo skupaj. Ko je prodan, te konfiguracije ne bo več na voljo po tej ceni. Popust za hitre kupce: če ga kupite do 31.10.2026, vam bomo odobrili 500 CHF popusta. Dejanje: pošljite nam vašo predvideno uporabo, zahtevano kapaciteto in ciljno lokacijo – potrdili bomo ustreznost in ocenili stroške transporta.

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Window production line WEINIG Bodpfx Apeh H Iyxsnsdi consisting of: Machining center Unirex 3000 Univar 15 Unitex 15

Stanje: generalkompletno obnovljen (rabljeno), Used steel storage tank according to DIN 6616/2, double-walled design (with test certificate), for above-ground storage, fitted with saddle supports, 1 manhole with PE blank cover, gasket, and stainless steel bolts and nuts. The tank has been expertly cleaned by us and fitted with an inner liner suitable for the storage of liquid fertilizer. Capacity: 100,000 litres Bdodpfx Apshui D Eenei Diameter: approx. 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg Upon request, we can supply the tank with a new exterior coating and equip it with a ladder and operator platform. Optional special equipment for liquid fertilizer storage: • Vacuum leak detector • Protective box for holding the leak detector • Standard liquid fertilizer fittings including filling, extraction, venting, and dip tube • 2" polyester liquid fertilizer pump • Installation of the liquid fertilizer pump • Overfill protection • Protective box for housing the leak detector and overfill protection • Anti-siphon valve and extended piping • Dead man's switch • Additional connection for mixing in water

Stanje: novo, Leto izdelave: 2026, maks. dvižna zmogljivost: 330 kg Multiplex plošča 1245x740 mm Bdedpsbygv Nofx Apnsi Višinsko nastavljiv: od 475 do 1070 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, 15 MVA oljni transformator, z ekspanzijsko posodo, Buchholz relejem, sušilcem zraka, stopenjskim preklopnikom; Siemens, 2008, vezalna skupina Ynd5, na voljo celotna dokumentacija transformatorja. Bodpfxsugg Dfs Apnedi

Stanje: novo, Leto izdelave: 2026, maks. nosilnost 400 kg Delovna plošča iz brezove vezane plošče Velikost plošče: 1245 x 740 x 24 mm z ročnimi utori Nastavljiva višina: 480 - 1070 mm Bdedeyrc Duspfx Apnei

Stanje: generalkompletno obnovljen (rabljeno), Used storage tank made of steel according to DIN 6616/2 (with test certificate), double-walled, for above-ground storage, with saddle supports, 1 manhole, optical leak detector, overfill prevention device, and complete tank fittings consisting of: Bsdpfx Apjhvmitonedi - 3" filling pipe with TW cap - 1" dip pipe with dipstick - Euroflex 3 suction assembly (max. 150 l/h) - 1 vent nozzle 2" with vent cap The tank is factory-equipped with the aforementioned fittings and is cleaned inside. Capacity: 50,000 litres Diameter: 2,500 mm Length: approx. 10,800 mm Weight: approx. 8,800 kg The tank can be supplied with a new coating in the RAL colour of your choice and optionally equipped with a ladder including operator platform. Cost-effective delivery with our own truck is possible. Simply let us know your delivery location and we will promptly provide an exact shipping quote. Should you require any further information, please feel free to call us or send us an email. Trade-in and purchase of tanks/containers is possible – just contact us about this. Delivery time by arrangement! We always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 litres Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Leto izdelave: 2000, stanje: dober (rabljeno), Tank & Environmental Protection Wozniack – Certified Specialist Company According to the German Water Management Act (WHG) Dear Sir or Madam, We offer a 30,000-litre double-walled storage tank suitable for storing liquid fertilizer as detailed below. The storage tank is equipped with a factory-new inner liner made of plastic, resistant and certified for liquid fertilizer storage. An acoustic leak detection system is installed externally in a lockable protective box. In addition, the storage tank’s double wall is made of steel for extra safety. The plastic liner has general building authority approval, making it suitable and certified for the storage of liquid fertilizer (AHL), NOx reduction agents, AUS32, and AdBlue. Bdedpfjc Nk Dyex Apnsi Technical Specifications: - Nominal capacity: 30 m³ - Quantity: 1 unit - Condition: Used, but fully refurbished (cleaned, reconditioned, primed, and repainted) - Paint finish: RAL color; custom colors available upon request - Material: Steel-in-steel—Material grade S235JRG2 - Documentation: Manufacturer’s certificate/test certificate per DIN 6616 D/2 and type plate - Accessories include: * 1 dipstick * 1 vent nozzle * 1 filling nozzle (3") made of new V2A stainless steel * 1 new acoustic leak detector for double wall monitoring * 1 ladder * 1 suction line (3"), newly installed in V2A stainless steel - Design: Cylindrical horizontal tank with support feet/brackets Tank Dimensions: - Length: approx. 6,740 mm - Diameter: approx. 2,500 mm - Weight: approx. 6,500 kg - Installation: Above-ground Special Offer: Liquid fertilizer (AHL) tank systems available from 5,000 to 100,000 litres, as well as water and fire water tanks. Customization: Your input for customizing the tank system is welcome. All systems are thoroughly tested and inspected by our experienced staff at our facility. Delivery: Economical delivery can be arranged upon request. Site inspections of our systems are possible at any time. We also have a wide range of above-ground and underground tanks in various sizes available for immediate purchase on-site. Interested in our offer? Should you have any questions or specific requests, please feel free to call. Our experienced team will be happy to advise you. Price / Shipping: The price is ex-works Warstein, loaded free of charge. Delivery can be arranged at a competitive additional cost. Lead time: Immediate availability Invoice with VAT shown will be provided. Additional Services: We also purchase existing tank systems and, as a WHG-certified specialist company, can professionally empty, clean, dismantle, and transport them from your site. Best regards from Warstein, Tank- und Umweltschutz Wozniack Enkerbruch 2 59581 Warstein

Stanje: generalkompletno obnovljen (rabljeno), Used steel storage tank according to DIN 6616/2 (with inspection certificate), double-walled, suitable for above-ground storage, equipped with saddle supports, one manhole, optical leak detector, overfill prevention device, and complete tank fittings consisting of: - 3" filling pipe with TW cap - 1" dip pipe with dipstick - Suction combination with suction line (1 1/2" or 2") - 1 vent nozzle 2" with vent cap The tank is factory-equipped with the above-mentioned fittings and is cleaned internally. Capacity: 100,000 liters Diameter: 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg The tank can be finished in your desired RAL color with a new paint job and optionally be fitted with a ladder including an operating platform. Cost-effective delivery is possible with our own truck. Simply let us know the delivery location and you will promptly receive the exact freight costs. If you require further information, feel free to call us or send us an email. Trade-in and purchase of tanks/containers is possible—just contact us regarding this. Delivery time by arrangement! We also have tanks of this type continuously in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters Tank und Apparate Barth GmbH Bdsdpsguzhcsfx Apnji Werner-von-Siemens-Str. 36 76694 Forst