Barberan HOK-14\2 BASIC

Barberan HOK-14\2 BASIC

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 14824, delovna širina: 1.300 mm, višina obdelovanca (maks.): 40 mm, TEHNIČNI PODATKI Največja delovna širina: 1.300 mm Največja višina obdelovanca: 40 mm Cpedpfoxx Snhjx Afnew PODROBNOSTI O STROJU Transportni sistem: Motorizirane palice Sušilni sistem: 2 UV svetilki OPREMA Ločena krmilna omara

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, Drying Paternoster for Finger-Jointed Boards Consisting of: - Transfer chain after finger jointing press, foldable - Drying paternoster approx. 7 m, suitable for board lengths up to 6 m - Cut-off and zeroing saw - Conveyor belt for residual wood disposal Cedpewclkyofx Afnspw - Stacking system - Batten magazine is not for sale - Package cross conveyor The machine is in very good condition, very little operating time. The machine is still assembled but immediately available.

Stanje: zelo dobro (rabljeno), Gold-anodized plates Working dimensions 2.5×1.1 m Electric heating Cpjdpfxsu I N D Hs Afnew Fully functional, tested You can call or write to us. We speak and write German and Russian. You can also send messages in English. 31.3.5

Leto izdelave: 1994, stanje: dober (rabljeno), Rivo bandsaw sharpening machine Cpedepl D Hxspfx Afnew Model GA 250

Stanje: rabljeno, Mechanical nailer by Wursten & Dietz. Prepared for nailing ice skates. The machine is sold as is. Csdpfx Afelvripenepw

Stanje: rabljeno, številka stroja/vozila: 12625, Rotor diameter: 800 mm Rotor width: 1500 mm Cpodpfxsk Rfvkj Afnsw 6-knife rotor 4 rows of stator knives Infeed opening approx. 820 x 1500 mm Drive motor: 160 kW

Stanje: rabljeno, Leto izdelave: 2004, WEINIG GRECON DOUBLE-END FINGER JOINT LINE MOD. PJ 150/500 - CE - USED - Infeed wood length: 150 - 700 mm - Wood width: 40 - 150 mm - Wood thickness: 18 - 80 mm - Press length: 6100 mm - Pressing force: 120 kN - Milling motor: 15 kW Cjdpfx Aswry I Eofnopw - Scorer: 5.5 kW - Year: 2004 CE

Stanje: rabljeno, Leto izdelave: 2018, Used machine Year of manufacture: 2018 Special feature: Machine suitable for edging heights up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 roller tracks for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm length - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber surface - Digital counter for height adjustment - Direct glue application to the workpiece: Leak-proof glue pot with bottom glue supply and quick heat-up time after machine downtime - End trimming unit: - For front and rear edges of the workpiece - Automatic sensing on the workpiece - Pneumatic end trimming with blade for cuttable edges - Flush trimming unit: - With vertical sensing and horizontal guide - Reproducible adjustment using digital counters - Two powerful 0.4 kW high-frequency motors - Continuously adjustable from 4,000 to 18,000 rpm - Cutter diameter 70 mm, Z4, radius 2 mm/15° - Central extraction port Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper trimmer with the belt feed - Continuous workpiece support approx. 1,800 mm long - Extendable workpiece support rail, approx. 300 mm extendable - Rotating film reel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm Cpodewka S Ispfx Afnow - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected power: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film reel): approx. 1,800 x 700 x 1,300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Stanje: novo, Leto izdelave: 2024,

Leto izdelave: 2004, stanje: dober (rabljeno), številka stroja/vozila: 2004-3-11A, - Manual feed of the milling unit - Working table height adjustable via handwheel - Horizontal and vertical material clamping - Cutter diameter up to 250 mm - Max. milling height: 150 mm - Max. milling depth: 80 mm - Max. milling length: 305 mm - Angle-adjustable fence left & right: 20° – 90° - Spindle speed: 4,500 rpm - Drive: 400 V, 3.2 kW - Compressed air connection: 6 – 8 bar - Air consumption per work cycle: 10 l Cpsdsf E Higspfx Afnow - Pneumatic profile clamping - Table base frame - Space requirement: approx. W 1,100 x H 1,300 x D 700 mm - Weight: approx. 200 kg