Škarje za odpadke

Aymas Recycling Machinery IS 900 Inclined Shear

Stanje: rabljeno, Leto izdelave: 2010, obratovalne ure: 11.780 h, Oprema: ABS, pogon na vsa štiri kolesa, Volvo BAGGER EW140C klima naprava Lhjdpfxjyltr Ao Ac Uok 16.850 kg 91 kW Odlično stanje

Leto izdelave: 2023, stanje: novo, Funkcionalnost: popolnoma funkcionalen, This machine, model KM13, cuts electric cables with a diameter ranging from 20 to 120 mm. The different diameters can be easily adjusted by turning the hand wheel up or down. The machine operates at a speed of 25 m/min. Its dimensions are: length 600 mm, width 600 mm, and height 1600 mm. The machine weighs approximately 200 kg. It is powered by a 380V-50Hz, 3 kW electric motor with a reduction gearbox. The cable is cut from both sides, allowing the copper core to be easily removed. Lhsdpfx Asq E Ti Hec Uek Spare parts such as blades, drive components, bearings, etc. are available as well. If desired, we can also perform maintenance on these machines. This is a machine that is ready to use immediately and easy to operate. If you would like to test it, please bring your own cable.

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK Lhjdpfx Aergzv Nsc Ujk * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: rabljeno, prevoženi kilometri: 320.000 km, moč: 353 kW (479,95 KM), prva registracija: 02/2014, vrsta goriva: dizel, skupna masa: 32.000 kg, zavore: retarder, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: filter saj, žerjav, Dvigalo: ----- Retarder - klima - dvigalo Fassi 315-7 letnik 2013, vod za grabež - Hiab 21T pregibna roka letnik 2013 - priprava za priklop prikolice Vzmetenje: Listnato vzmetenje Ledpfx Ajw Ubz Dec Ujhk

Stanje: rabljeno, Leto izdelave: 2003, Dvotirni bager namenjen razrahljanju materiala na skladišče ali na transportno sredstvo. Stroj se uporablja za dela: - na železniških in tramvajskih tirih - vzdrževalna in obtirna dela - zemeljska in cestogradbena dela Proizvajalec: ATLAS Model: 1604 KZW Leto izdelave: 2003 Lastna teža: 22.000 kg Dimenzije: 5,9x2,5 m, v: 3,0 m Moč motorja: 90 kW Oprema: - klimatska naprava - Webasto ogrevanje - trojno lomljiva roka - prednja in zadnja vlečna kljuka - dodatni priklop za pnevmatsko kladivo - vzvratna kamera Lhjdpfxjhutkfo Ac Ujk - štiri hidravlične stranske podpore - upravljanje z joystickom Tehnično stanje: rabljeno, delujoče

Stanje: pripravljen za uporabo (rabljen), Drovalnik z dizelskim pogonom, npr. za motorje, menjalnike, kovino, električne komponente. Stroj je popolnoma pripravljen za uporabo. Lahko pošljemo video. Lhsdpfx Ajw Ngn Eec Usk

Stanje: rabljeno, številka stroja/vozila: IDC000031, Барабан для сушки щепы Длина — 14 м Ширина — 3,6 м Lsdsrl Ra Hjpfx Ac Ushk Производительность сушки — 10 т/ч

Stanje: dober (rabljeno), “Rentec Dinosaurus 2600S” for sale Manufacturer: Rentec Model: Dinosaurus 2600 S Equipped with hydraulic unit and control system integrated in a container. Comes with refurbished rotors. A discharge conveyor for the Rentec Dinosaurus 2600S is also in stock. Lhedpfx Asvt Tptoc Uek For more detailed information, please refer to the PDF below.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, moč: 83 kW (112,85 KM), skupna masa: 6.000 kg, skupna dolžina: 460.000 mm, skupna širina: 4.000 mm, skupna višina: 4.300 mm, Leto izdelave: 2024, obratovalne ure: 300 h, vrsta vhodnega toka: trifazni, Prodajamo popolnoma delujoče škarje za rezanje odpadkov/alligatorske škarje. Konec leta 2023 jih je generalno obnovil ATM. - Takoj pripravljene za uporabo - Brez potrebnih popravil - Priloženi so 4 podložni obroči Področja uporabe: - Rezanje Cu, Zn, Pb katod do debeline 25 mm - Rezanje avtomobilskih hladilnikov do višine 105 mm Lhodjq Nmw Ispfx Ac Uok - Rezanje Al pločevine, profilov, palic, cevi do debeline 25 mm - Rezanje Cu, Al, Pb cevi do višine 105 mm - Rezanje nerjaveče pločevine do debeline 16 mm - Rezanje Fe profilnih cevi, pločevine, cevi, palic, ploskih želez Alligatorske škarje, škarje za odpad, katodne škarje, škarje, klešče, hidravlične škarje, škarje za pločevino, giljotinske škarje, škarje za katalizatorje, listne škarje, škarje za avtomobilske hladilnike, kabelske škarje, škarje za cevi

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 2.400 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: R40410, moč: 371,43 kW (505,00 KM), lastna masa: 75.000 kg, rezalna sila: 900 t, Premična dizelska škarjasta stiskalnica COPEX model REFLEX 900 ton (leto 2023). Servis opravljen pri proizvajalcu. Zmogljivost: 10 do 22 t/h glede na vrsto odpadkov za rezanje. Na voljo takoj. Lhedpfx Acexg Ekfo Usk