Stroj za okroglo upogibanje

AYEL-TECH MRM 90-10/3,3

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, poteza s peresom: 190 mm, hitrost vretena (min.): 41 obr/min, največja hitrost vretena: 1.800 obr/min, skupna masa: 1.920 kg, teža obdelovanca (maks.): 17 kg, najv. debelina jeklene pločevine: 32 mm, vrtilni moment: 250 Nm, višina mize: 900 mm, Used DONAU Rapid Radial Drilling Machine Type DR 32 - Fully overhauled by vaumatec in 2022 - Equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 support feet to relieve the table frame) Technical data: Drilling capacity (solid material): St 60/E335, Ø 32 mm (with feed rate 0.20 mm/rev): GG 22, Ø 45 mm Tapping capacity: St 60/E355, M26 Tapping capacity: GG22, M35 Tool holder: MT4 Column diameter: Ø 195 mm Spindle nose to table distance (min./max.): 260/660 mm Table height: 900 mm Quill stroke: 190 mm Column travel: 400 mm Spindle speeds, Range I: 41-1800 rpm Feeds: 0.1-0.15-0.20-0.3 mm/rev Spindle torque: max. 250 Nm Lhsdpfx Acorn Riqsyjp Arm travel resistance (radial): 25 N Arm travel resistance (axial): 25 N Clamping force (radial): 3500 Nm Clamping force (axial): 5500 N Feed force: 7500 N Max. permissible mass: 17 kg Max. permissible moment of inertia: 0.002176 kgm Workpiece: Max. table load: 1000 kg Center of gravity: centered on the working surface

Stanje: dober (rabljeno), Leto izdelave: 2007, Deli, prikazani z roko, niso vključeni. Lhjdpsvm Hgrefx Acyjp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 83 mm, stružna dolžina: 1.000 mm, premer struženja: 570 mm, premer struženja nad zgornjim sanežem: 340 mm, premer tulec: 80 mm, hod vretena: 200 mm, skupna masa: 3.200 kg, zunanji premer vpenjalne glave: 250 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Machine is in very good condition. Available immediately! Can be tested under power. Ledpfjwxw S Iox Acyjhp

Leto izdelave: 2017, Stanje: pripravljen za uporabo (rabljen), Laser power: 10kW (10,000W), Working area: 3000mm x 1500mm, Maximum material thickness: Mild steel: 25mm, Stainless steel: 30mm, Aluminium: 30mm, Copper: 12mm, Brass: 15mm. Positioning speed: 120m/min, Positioning accuracy: +/-0.05mm, Maximum workpiece weight: 1,100kg. Machine dimensions (X/Y/Z): approx. 9500mm x 3500mm x 3500mm, Extraction unit dimensions (X/Y/Z): approx. 1500mm x 1500mm x 4000mm, Machine weight: approx. 12,000kg, Operating hours: approx. 17,000h. Documentation available. On-site inspection possible. Expected to be available from June 2025. Lhedovyiqgjpfx Acyjp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8044000703A, Siemens 840 D control Country of manufacture: EU – Poland Voltage: 400V Dimensions: 3082x2260x1775 mm (with chip tray) 4228x2260x1775 mm (with chip conveyor) Net machine weight: 3400 kg TECHNICAL SPECIFICATIONS CTX 310 ecoline V1/V3 New Design Lsdpfsw T Sqyjx Acyjhp Working capacity Swing over bed: 330 mm Swing over cross slide (X): 260 mm Maximum turning diameter: Ø 200 mm Chuck diameter: Ø 210 mm X-axis travel: 182.5 mm Z-axis travel: 455 mm Centre height: 190 mm Distance between centres: 581 mm Feed drive Rapid traverse X and Z axes: 30 m/min Control: Siemens Sinumerik 840D Slim Line C-axis with Siemens control Speed: 0 – 100 rpm Torque: 112 Nm Accuracy: < 0.04° Spindle Spindle nose: 140 h5 mm Front bearing diameter: 100 mm Spindle bore: Ø 74.3 mm Bar capacity: 51 mm Main drive with Siemens control Drive power (40% / 100% duty cycle): 16.5 / 11 kW Torque (40% / 100% duty cycle): 166.5 / 112 Nm Max speed: 5,000 rpm Tool turret Number of tool stations: 12 Tool holder: DIN69880 (VDI 3425) Turret disc diameter: 30 mm Tool change (with locking): 0.95 sec Tool change (without locking): 0.4 sec Powered turret with Siemens control Number of driven tools: 12 Drive power (40% duty cycle) at 4000 rpm: 8.4 kW Torque (40%): 20 Nm Max speed: 4,500 rpm Tailstock Automatic movement: 396 mm Quill bore: flange Maximum quill axial force: 400 daN Hydraulic unit Tank capacity: 50 L Maximum pressure: 50 bar Cooling system Tank capacity: 175 L Capacity with conveyor: 200 L Pump power: 0.85 kW Pump flow at 5 bar: 30 L/min Electrical connection Maximum power: 21 kVA Current: 400V Frequency: 50–60 Hz Fuses: 33A Pneumatics Compressed air connection: 6 bar Environmental conditions Ambient temperature: +15 to +35°C Maximum humidity: 75% Unless otherwise stated, the technical information is provided without guarantee of accuracy or completeness.

Stanje: nepreverjeno (rabljeno), Lubot & Wakker Type: 1-pallet vacuümkamer Capaciteit: tot 2.000 kg (6-8 ladingen) per uur Volledig uitgevoerd in roestvrij staal Afmetingen kamer: L x B x H = 2.200 x 1.700 x 3.400 mm Gewicht: 1.200 kg Elektrisch: 380V 3P+N+E, 7,25 kW Perslucht: 6 bar Drinkwater: 3 bar, ca. 1250 liter/uur Uitvoering: - Bedieningskast - Vacuümpomp - Mengtank voor waterbereiding - Opslagtank met pomp, kleppen etc. Ljdsfxyqrspfx Acyjhp Wordt geleverd in actuele staat, of getest en op wens van de klant afgesteld

Stanje: dober (rabljeno), Leto izdelave: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year: 2018 Only approx. 1,000 spindle hours since spindle replacement Total machine hours: approx. 20,500 2024: Spindle replaced (18,000 rpm) 2024: Geometry re-calibrated Travel paths: X 650 / Y 850 / Z 500 mm Rotary table: 360° continuous Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle taper: HSK-A63 The machine is equipped as follows: - 60-position tool changer - ICS (20 bar) with belt filter system - Air through spindle - Kessler table, 500 mm diameter - Infrared part measurement – 3D probe - Tool measurement via BLUM laser - Rotational viewing window - POS DCM collision module - Mobile electronic handwheel - Oil mist extraction - Heidenhain linear measuring systems X, Y, Z - Purge air for all linear measuring systems - Active air-to-air electrical cabinet cooler - Active cooling for 4th & 5th axis, controlled - Network and USB connection Lhjdjwz I Acopfx Acyjp - Controlled spindle chiller - Heidenhain rotary measuring system - POS contour monitoring - External hinged belt chip conveyor - Coolant pump at head, controlled via M functions - Pump for chip rinse system - Chip rinsing equipment - Machine status indicator - Air at spindle - Oil/coolant separator, electromechanical - Automatic coolant level monitoring - 3-fold media connection at table center - Hydraulic unit incl. control via M function Connected load: 60 kVA Installation dimensions: W 4800 / D 4600 / H 3000 mm + ICS unit (LxWxH): 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg The machine is in very well-maintained condition and comes from a small, family-run company. In 2024, the spindle was replaced and geometry was calibrated (guides repaired and aligned). Since then, the machine has seen only limited use.

Stanje: novo, Dimensions (LxWxH): 1,630 x 700 x 1,200 mm Approx. Weight: 480 kg Total Power Requirement: 1.1 kW Bending Radius: 2 mm Sheet Thickness: 3 mm Sheet Length: 1,050 mm Technical Data Sheet Rolling Machine Roller Diameter: 90 mm Rolling Speed: 6 m/min • Asymmetric roller arrangement • 2 rollers driven by brake motor • Rear roller adjustment via handwheel • Swiveling top roller • Conical rolling device • Double foot switch for forward/reverse operation • Lower and rear rollers with wire grooves • Operating manual in GERMAN EXTRA: hardened rollers EUR 900,-- Lodpfx Aod Eqqqocyshp See the catalogue at the following link:

Stanje: rabljeno, Leto izdelave: 2015, Technical Details: X-axis travel: 960 mm Y-axis travel: 600 mm Z-axis travel: 480 mm Rotary table: D 350 mm Table load capacity: 200 kg Spindle speeds: 12,000 rpm Spindle motor power: 14/10 kW Control system: HEIDENHAIN iTNC 530 Rapid traverse: 32 / 32 / 24 m/min Tool changer: 30 positions Spindle taper: ISO BT 40 Machine weight approx.: 7.4 t Total power requirement: 45 kVA Lhedorm Txbopfx Acyop Space requirement approx.: 3.1 x 2.3 x 3.1 m 5-axis simultaneous universal machining center, NC rotary-swivel table D 350mm, A-axis (120/-42°), C-axis 360°, Through-spindle coolant (IKZ), Electronic handwheel, Chip conveyor, Direct measuring system, Operating hours: approx. 9,000 power-on hours, approx. 3,500 spindle hours

Stanje: rabljeno, Mounting: MK 4 Lodpfx Aceb N Ezreyshp