Obdelovalni center

Averex HS-540i GTS 8 APC

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: 5319, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 2.600 mm, pomik po osi Z: 1.300 mm, BASE MACHINE PowerSpeed 5 WITH FORK HEAD – TECHNICAL DATA Travel ranges: X-axis: 8,000 mm Y-axis: 2,600 mm Z-axis: 1,300 mm Machine Bed (X-axis): Flat-bed design with 1,000 mm guideway width. Two electric motors drive a centrally mounted rack. Hardened compact linear guides ensure high precision. Machine Column (Y-axis): Welded steel construction with 900 mm guideway width. Two liquid-cooled feed motors and two measuring systems provide dynamic performance and accuracy. Protection is provided by telescopic steel covers. Spindle Slide and Spindle Head: Made from GGG 60 cast iron, guided by compact linear bearings. Optimal power transmission via long guideways and tight arrangement of the Y and Z axes. Dual Ball Screw Drive: Two vertical ballscrews with separate drives and measuring systems for high dynamics and long-term accuracy. Drive System: Digital individual drives with AC motors. Feed and rapid traverse range: 2–30,000 mm/min. Acceleration: 3.5 m/s². Measuring System: Direct, non-contact linear measuring systems for high manufacturing accuracy. Automatic 2-Axis Fork Head with Motor Spindle: A-axis: 764 Nm (100% duty cycle), ±105°, clamping torque 2,160 Nm, accuracy ±5" C-axis: 810 Nm (100% duty cycle), ±200°, clamping torque 3,024 Nm, accuracy ±3" Motor Spindle: HSK-A 63, up to 18,000 rpm, 89 Nm (100% duty cycle), internal/external coolant supply up to 70/20 bar, liquid cooled Electrical Equipment: 400/230 V, 50 Hz, 80 kVA connected load. Control cabinet (IP54) with control and switching devices. Cable length machine-to-cabinet: 5 m. Control Cabinet Cooling: Dual-chamber system with automatic internal air cooling and dehumidification. Lubrication: Central lubrication for guides, permanent grease lubrication for main spindle, oil mist lubrication in milling head. Energy Supply: Compressed air 4–6 bar, G ¼ connection, with filter pressure regulator and condensate separator. Control System: Siemens 840D sl with swiveling operator panel. Wireless handwheel with LCD display, potentiometers, and buttons for axes, feed, and spindle. Remote Maintenance: Fault diagnosis via alarm manager, notification by email/SMS (SIM card and network required). TightBlock Machine Base (X = 8,000 mm): Gujdpfx Aowdub Dsb Tjk Heavy composite construction for vibration damping. Foundation recommendation: ≥100 mm thickness per 1,000 mm X travel range, structurally verified. Coolant System: 500 l tank, filtration system

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, The HURON NU-4 is equipped with various buttons, switches, and levers to control its operation. x-travel: 1100 mm y-travel: 700 mm z-travel: 500 mm spindle/table distance: 9-509 mm spindle head - swivelling: 360° spindle taper: SK 40 spindle speed range: 30 - 2066 rpm spindle speed steps: 27 feed rates: 1.6 - 820 mm/min feed steps: 27 table surface: 1435 x 460 mm Gjdperiulgofx Ab Tjuk rapid traverse on X and Y axes: 2.8 m/min rapid traverse on Z axis: 1.4 m/min total power requirement: 10 HP machine weight approx.: 3.1 t machine dimensions approx.: 2.36 x 1.65 x 1.45 m (W x H x D)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1978, Universal tool milling machine Make: DECKEL Model: FP 2 stepless Year of manufacture: 1978 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2202-10147 with warranty Geometric acceptance with inspection protocol Accessories: - 3-axis digital readout HEIDENHAIN ND 780 Gjdpfsfcqfpjx Ab Tjuk - Universal table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Central lubrication, manual - Coolant system - Operating manual - used, as seen -

Stanje: dober (rabljeno), Leto izdelave: 2007, stružna dolžina: 1.065 mm, premer struženja: 470 mm, Chip conveyor SMW 315 3-jaw chuck 2 x Radial driven tool holders 2 x Axial driven tool holders Spindle bore: 80 mm BMT tooling system Tool measuring probe Spindle hours: 6,960 / Operating hours: 6,270 Max. turning diameter: 470 mm X-axis travel: 260 mm Z-axis travel: 1,065 mm Godpfx Aswq Rpwjb Teuk Spindle bore: 80 mm Spindle speed: 4,200 rpm Spindle power: 30 kW Tool changer: 12-position BMT tool system Driven tool speed: 6,000 rpm Driven tool power: 7.1 kW Length: 3,310 mm Width: 1,900 mm Height: 1,970 mm Weight: 6,100 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Machine Type: Vertical Machining Center Manufacturer: DMG MORI Model: CMX 600 V Year of Manufacture: 2020 Guodpfx Absrwi Sws Tek Control: 840D SL Slimline Multi Touch Operate 4.7 Country of Origin: DE- Delivery Time: by arrangement Basis of Delivery: ex works Technical Details Travel X-axis: 600 mm Travel Y-axis: 560 mm Travel Z-axis: 510 mm Control: 840D SL Slimline Multi Touch Operate 4.7 Main Spindle: Max. Speed: 12,000 rpm Main Spindle Drive Power: 13 / 9 kW Max. Torque: 82 / 54 Nm Tool Holder: SK 40 Distance Spindle Nose to Table: 120 - 630 mm Work Table: Clamping Surface: 900 x 560 mm Max. Table Load: 600 kg T-slots: 5 Working Height: 850 mm Tool Magazine: Number of Tool Stations: 30 pos. Tool Holder: SK 40 Max. Tool Diameter: 80 mm Max. Tool Diameter with Free Adjacent Slot: 130 mm Max. Tool Length: 300 mm Max. Tool Weight: 8.0 kg Tool-to-Tool Change Time: 2.4 sec Chip-to-Chip Time: 6.7 sec Feed Rates: Rapid Traverse: 30 m/min Feed Force: 5 kN Max. Feed Rate: 30,000 mm/min Total Power Requirement: 32 kVA Approx. Machine Weight: 5.0 t Approx. Space Requirement: 4.0 x 5.0 x 3.0 m Accessories Documentation Chip Conveyor Coolant System High-pressure Coolant 12 bar Internal Coolant Supply Electronic Handwheel Signal Lamp – 4 colors Measuring Probe PP40 Tool Measurement

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Turning-milling center Takisawa TMM 250 3, year of manufacture 2016, Fanuc control Turning length: 1300 mm Turning diameter: 350 mm Spindle speed (max.): 4000 rpm Gsdpfx Ajrt Ip Nsb Tjuk 9 axes 2 x spindles 2 x C-axis Swing diameter: 780 mm Max. turning diameter: 350 mm Max. turning length: 1,300 mm Chuck diameter left: 250 mm Chuck diameter right: 200 mm Upper tool carrier with Y-axis 260 mm and B-axis 230° / +/- 115° Complete with 30-position tool changer Lower tool turret: 15-station revolver – all positions driven Fully simultaneous 5-axis machining with turning/milling support. Tool changer with 30 stations Workpiece magazine, right side of the machine, with gantry handling Driven tools at the turret C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle, 20 bar Due to excessive administrative expenses (customs regulations), we do not deliver to Turkey, Iran, Russia, or Belarus.

Stanje: rabljeno, Leto izdelave: 2009, Premer planske plošče: 1250 mm Višina struženja: 1250 mm Krmiljenje: Fanuc 0i-TD Največji navor na planski plošči: 12500 Nm Največji premer struženja: 1600 mm Maksimalna teža obdelovanca: 5000 kg Hitrost vrtenja mize: 2–300/min X-os: 1475 mm Z-os: 900 mm Hitri pomik: 10 m/min Vreteno konus: ISO BT50 Število orodnih mest: 12 Skupna moč: 75 kW Teža stroja: ca. 32 t Godpfxewlvifj Ab Teuk Prostorska zahteva: ca. 4,7 x 5,8 x 5,5 m CNC karuselni stružni stroj z avtomatskim menjalnikom za 12 stružnih orodij z BT 50 vpetjem. Krmiljenje: Fanuc 0i-TD

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Universal tool milling machine Gsdsm Nbwtjpfx Ab Teuk Manufacturer: KUNZMANN Model: WF 4/3 Year of manufacture: 2002 – partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red RAL7016 anthracite grey Machine no.: 344025 with warranty Geometric inspection with test protocol Accessories: - HEIDENHAIN TNC 124 path control system - HEIDENHAIN HR 410 electronic handwheel - HEIDENHAIN KT 130 electronic 3D probing system • For detecting the workpiece position • For determining workpiece reference points • For measuring finished parts • Incl. Weldon chuck SK40/Ø 16 mm - Universal table 650 x 395 mm (T-slot: 14 mm) • Swivels on 3 axes • Rotatable 360° (displayed digitally in the control as a 4th axis) • Tiltable +/- 30° • Tilt range towards the machine 45° • Tilt range away from the machine 15° • Centering bore Ø 32 mm • Table load capacity 150 kg - Vertical milling head SK 40 • With hydraulic clamping system DIN 69872 - Central lubrication, electric - Coolant system - Splash guard cabin, movable, electrically secured - Operating instructions Used as seen The machine complies technically with the standards of its year of manufacture.

Stanje: dober (rabljeno), Leto izdelave: 2014, x travel: 730 mm y travel: 730 mm z travel: 880 mm Pallet size (2x): 500 x 500 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Distance spindle center to table: 80 - 810 mm Milling spindle drive: 30 kW Max. torque: 102 Nm Max. workpiece weight: 500 kg Max. workpiece diameter on the pallets: 800 mm Max. workpiece height: 1,100 mm Pallet change time: 9.5 sec Max. feed rate: 60,000 mm/min Rapid traverse: 60 m/min Tool changer, number of tools: 40 Max. tool diameter: 110 mm Max. tool diameter with adjacent pocket empty: 320 mm Max. tool weight: 30 kg Chip-to-chip time: 4.4 - 10 sec Tool-to-tool change time: 1.95 sec Operating hours: 15,894 h Total power consumption: 46 kVA Machine weight approx.: 15 t Gsdpfx Aev Htiteb Tjuk Space requirements approx.: 5.5 x 3 x 2.8 m Well-maintained horizontal machining center DMG-Mori, Model NHX 5000, year of manufacture 2014, equipped with Siemens 840D CNC control, two pallets, and 40-position tool changer. Displayed operating hours: 23,262; only 15,894 spindle hours! Further data: Distance spindle nose - table center: 70 - 950 mm Pallet indexing time: 1.3 sec B-axis indexing (table): 360 x 1 degree Creep feed rate: 0 - 5,000 mm/min This is a used machine, therefore we sell under exclusion of any warranty. STOCKING DEALER WITH OWN 1,600 m² WAREHOUSE

Stanje: delavnici obnovljeno (rabljeno), potovalna razdalja osi X: 310 mm, pomik osi Y: 294 mm, pomik po osi Z: 210 mm, skupna masa: 3.000 kg, največja hitrost vretena: 50.000 obr/min, Used HSC machine RXP400DS/ RXD5 -Refurbished- Gsdpfxolzhhcs Ab Teuk The machine is fully refurbished, tested, and measured in our facility. The machine then meets the tolerances of a new machine! Working area: - X-axis: 200 mm - Y-axis: 294 mm - Z-axis: 200 mm - Drives of linear axes: Linear motors on all axes. - Drives of rotary axes: High-dynamic direct drives with integrated cooling. - Feed rates 0 - 40,000 mm/min on all linear axes. - Network connection: - Tool measurement laser: Diameter and contour measurement, wear monitoring and breakage control for the milling tools. - Chuck control, 1st chuck - Emulsion cooling with mechanical oil mist extraction - RMS Main Job Manager - Spindle max. 60,000 rpm HSK 25 - 12-position linear tool changer; optional conversion to chain magazine - Option: high precision - Remote maintenance via Teamviewer - Transport dimensions of the machine: W 2,425 x L 1,925 x H 2,140 mm - Weight: approx. 3,000 kg A demonstration of the machine in ready-to-operate condition is possible at any time. You are also welcome to find more information about our refurbished machines on our website or on our Hüttmann YouTube channel.