Hidravlična stiskalnica 50KN Atsugi AP-5-KL

ATSUGI AP-5-KL 50KN 5ton

Stanje: zelo dobro (rabljeno), The fully hydraulic high-speed production band saw is equipped with a universal hydraulic system for exclusive or alternating cutting of thin- and thick-walled profiles as well as solid materials, all without changing the saw blade, thanks to a uniform tooth pitch of 3 or 4 teeth per inch. The machine features a pre-tensioned saw frame guide, enclosed oil hydraulics, triple swivel bearing, separate coolant system, steplessly adjustable hydraulic cutting pressure, lifting movement and accelerated return stroke, and is standard-fitted with a stepless mitre setting device. The saw frame can be lifted in rapid traverse mode. A pivoting vice ensures optimum utilization of the saw blade. Longitudinal guidance with ground and hardened guide rails transfers the cutting forces to the saw frame. Automatic end stop. Push-button control for ON/OFF functions and rapid traverse of the saw frame. Manufacturer: KASTO Type: PSB 280 U Drive power: 2.2 kW Stroke frequencies: 40/51/64/80/102/128 strokes/min Cutting speed: 11/14/19/22/28/38 m/min Universal hydraulics: standard Saw feed: hydraulic Cutting range round: 280 mm yCutting range flat: 280 x 150 mm Mitre range: 0-45° Material support height: 600 mm Weight: 650 kg Length/width: 1500 x 600 mm Height: 1000 mm Ffodpfxoxdwbke Abvow Saw blade dimensions: 450 x 40 x 2 mm Year of manufacture: 1988 Accessories: coolant system, rapid lowering, rapid lifting

Stanje: rabljeno, Funkcionalnost: nefunkcionalno, Leto izdelave: 1971, The abbreviation LARC stands for Lighter Amphibious Resupply Cargo. This refers to the vehicle’s rear tailgate, which enabled the military to transport a truck or other military equipment. The "XV" following LARC indicates the maximum payload capacity: 15 tons. The vehicles are constructed from aluminum and have the following precise dimensions: 13.71 m in length, 4.41 m in width, and 4.70 m in height (US measurements: 45 ft x 15 ft x 14 ft). The original LARC vehicles were equipped with two Cummins eight-cylinder diesel engines, each producing 300 HP. On land, they could reach a maximum speed of 48 km/h, and in water, 9.5 knots, which is approximately 18 km/h. The unladen weight of the vehicle is 22 tons. The maximum permissible weight is 35.5 tons. The previous owner intended to convert the boats to fully electric propulsion in order to offer sightseeing tours in the Wadden Sea. Ffjdpfx Abjxcgy Hovow Approximately €200,000 was invested, but the project was not completed. The diesel engines have been removed and are no longer available. Battery packs are present and partially installed. It is not known exactly what work still needs to be completed.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7/61, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 760 kg Customs tariff number: 8459.2930 External dimensions: approx. 1250x1000x1700 mm Fodsd Amgkopfx Abvefw TECHNICAL DATA: WORKING AREA X and Y travel: 200x200 mm Vertical quill stroke: 250 mm Drill spindle travel: 70 mm Max. clearance between table and spindle nose: 330 mm Clearance between column and spindle center: 260 mm Max. drilling capacity (in steel): 10 mm Max. boring capacity: 50 mm TABLE Usable surface: 400x300 mm Load capacity: up to 100 kg X and Y movement: motorized Number of T-slots: 6 (longitudinal) DRILLING HEAD Drill spindle internal taper: Morse 0 Drill spindle speed, steplessly adjustable: 150-3000 rpm Drill spindle feed: 0.015 mm/rev Measurement system: direct, optical Measuring elements: graduated scales, division 1 mm Readout: screen Zero-point shift: yes Direct readout: 0.001 mm Guaranteed positioning accuracy: 0.002 mm Installed power: 1.2 kW All technical data subject to change or error. Inventory no. 2160006, Machine equipped with: 1 rotary table Ø 220 with optical measurement 1 centering microscope with three-point suspension, 40x magnification, illumination 1 centering device with dial gauge, capacity 3 mm, MK0 1 center point MK0 1 touch probe with spring-loaded tip MK0 1 center punch MK0 1 chuck for centering drills MK0 1 self-tightening drill chuck 0-5 mm, MK0 1 boring head type 0, capacity 0.5-30 mm, MK0 1 leveling foot with 2 round leveling supports

Stanje: zelo dobro (rabljeno), Leto izdelave: 1975, -KOM 1002- Fedpfx Aog Ufvbsbvsfw Offered here is a press from HYDRAP, model HKPS8000. Technical data: Type: HKPS8000 Year of manufacture: 1975 Usable stroke: 200 mm Throat depth: 250 mm (central) Table size: 320 x 320 mm Installation height: approx. 345 mm Voltage: 380V Permissible load: 80,000 N Drive type: HYDR (hydraulic) Motor power: 1.5 kW Oil capacity: 60 l Oil viscosity: 3°E You will receive a proper invoice with stated VAT upon purchase. We have many other interesting items for sale as well. Feel free to check out all our listings. If you are interested or have any questions, please feel free to contact us via the messaging function!

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 180 mm - Spindle speed: 10,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 10,000 rpm - Spindle drive power: 1.5 kW - Minimum C-axis resolution: 0.001° BUSHING HOLDER 1 - Number of positions: 9 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm - Travel X/Y: 50/325 mm FRONT TOOL POST - Number of positions: 4 SUB OPERATION - Number of positions: 4 ELECTRICAL SUPPLY Fjdjuha Slopfx Abvjfw - Supply voltage: 400 V MACHINE HOURS - Power-on hours: 31,902 h - Spindle hours: 12,146 h EQUIPMENT - Control: Fanuc 32-iB - Interface: USB - Parts catcher - Parts conveyor belt - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump * with paper filter - Bar loader: IEMCA 338-HD - Coolant reservoir - Electrical transformer - Number of driven tool holders: 3

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 4 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12 mm - Max. machinable length: 135 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Minimum resolution C-axis: 0.001° SUB SPINDLE - Max. bar diameter: 12 mm - Travel distance Z: 120 mm - Spindle speed: 7,000 rpm BUSH HOLDER 1 - Number of positions: 5 FRONT TOOL POST - Number of positions: 3 BACK MACHINING - Number of positions: 3 ELECTRICAL SUPPLY Ffodouhaw Iopfx Abvsw - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Installation space required: 1500 x 770 mm - Machine weight: 1,400 kg ACCESSORIES - Control: Fanuc - 3-color status light - Driven guide bushing - Parts catcher - Parts ejector - Coolant tank - Electrical transformer

Stanje: novo, Leto izdelave: 2026, NEW TO THE MARKET! Universal belt grinder with extensive standard equipment and the ability to operate both vertically and horizontally. - Easy and quick belt change - Simple and fast grinding angle adjustment - Rapid head position change between vertical and horizontal orientation Machine Features Universal belt grinder equipped with a wide range of standard accessories, suitable for both vertical and horizontal operation. - Easy and quick belt change - Fast and simple adjustment of grinding angle - Quick head position adjustment between vertical and horizontal Technical Specification - Stepless speed control with RPM indicator Ffjdpfx Abovu Ukhjvsw - 550W brushless motor - Vibration absorber dampens operation and regulates belt tension and contact - Aluminum drive wheel - Aluminum, ball-bearing guide rollers - Belt guards compliant with CE standards - Steel supports for precise pressing of the workpiece to the belt Technical Data - Power supply: 230V - Motor: 0.55 kW - Belt speed: 12–34 m/s - Belt dimension: 50x1000 mm - Weight: 20 kg - Dimensions: 440x340x420 mm

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Clamping force: 600 kN, weight: 9 t, operating hours: 3,638 h, equipped with ENGEL viper 20 handling robot. Ffodpfx Aeh Nypfjbvsw

Stanje: dober (rabljeno), Flat-die thread rolling machine, thread rolling machine, segmented thread rolling machine, cold forming machine, knurling machine, thread rolling machine - Manufacturer: EWM, flat-die thread rolling and knurling machine - Type: unfortunately without type designation Ffedpfx Absi Eg Nkevsw - Drive: 4.6/5.8 kW, 1435/2890 rpm - Belt drive: adjustable in 3 steps - Knurling die: RAA 1.0 - Central lubrication - Dimensions: 1680/920/H1440 mm - Weight: 1308 kg

Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 191523, vpenjalna sila: 490 kN, premer vijaka: 30 mm, -KOM 3086- Fodpfx Abjv Tb U Devefw For sale is a used injection moulding machine. Technical data: Manufacturer: Engel Model: Victory 50 Designation: VC 200/50 Tech Clamping force: 50 t Year of manufacture: 2013 Machine no.: 191523 Screw diameter: 30 mm Tie-bar spacing: Tie-barless Locating ring diameter: 125 mm