ATS stroj za olepljanje US-2000 AD

ATS-Tanner

Stanje: rabljeno, ATS-Tanner ATS-CE 340/30 Banderole Wrapper Product width: 1"–13" Product height: up to 6" Speed/cycles: 22–26 cycles/min Performance: Up to 26 banding cycles per minute Band width: 30 mm Voltage: 115 V/50 Hz, 115 V/60 Hz Djdewlgz Sopfx Aplokl Electrical power: approx. 0.2 kW Weight: 25 kg Available at short notice

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), Stahl Saddle Stitcher ST 100.1, year of manufacture 1998 1,223 operating hours. Manual feed station (expandable to 2) 4 twin feeders Stapling unit with lateral knife control 2 Hohner 52/8 standard stitching heads 2 Hohner 52/8 loop stitching heads Lateral knife control Three-knife trimmer with center-cutting device Transfer marking table Dksdpfx Aoq Rw Exjpljl Shingled delivery 2 pumps Documentation

Stanje: rabljeno, Leto izdelave: 2001, ATS-CE 340/30 banding machine Banding machine with thermal sealing Band width: 30 mm Suitable for paper and film as banding material Adjustable cooling time Extras: Jumbo roll dispenser 2 units available Dkjdpfovthwfsx Aplsl Price plus VAT, ex works. All information without guarantee. Subject to prior sale. Trade sale. Sale takes place with exclusion of any warranty.

Stanje: rabljeno, Leto izdelave: 2019, US-2000 AST-MDM Dodpjwrp Hkefx Aplokl Arch size 700x750 mm Band width 30 mm The US-2000 AST-MDM enables high cycle performance. With its dynamic high-speed band feeding and retraction via a brushless motor, the machine achieves up to 30 bandings per minute. Thanks to package height detection, product memory, and band centering, the application of the band is precise and very gentle. Shipping cartons can thus be tightly banded without damaging the edges. The AST unit operates wear-free.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Malo rabljeni kuvertirni stroj z naslednjimi konfiguracijami: - 2 podajalni postaji za nezgibane dokumente z veliko kapaciteto (325 listov) - 1 podajalna postaja za priloge z veliko kapaciteto (300 prilog) – OPCIJSKO - 1 podajalna postaja za kuverte (DIN Lang, C6/5 in C5 ter druge formate) - Funkcija dnevne pošte za do 5 listov - Omogočeno obdelovanje predolgih dokumentov - Dolžina papirja: 127–406 mm - Širina papirja: 127–229 mm - Formati kuvert: DIN Lang, C6/5, C5 oz. 88 x 220 do 164 x 242 mm - "Flip-Flop funkcija": Samodejni preklop, ko je dovajalni predal prazen Dodpfxsiyx Ixj Apljkl - Samodejni nadzor dvojnega in manjkajočega vložka - Samodejna nastavitev dolžine zgiba (ni potrebe po odpiranju/nastavljanju) - Samodejna nastavitev višine naslovnega okenca - 4 načini zgibanja: enostavni, zavijalni, Z-zgib, dvojni paralelni zgib - Shranjevanje do 20 programov - Velik zaslon z grafičnim in besedilnim prikazom - Do 8 listov/kuverto - Do 3.500 taktov/uro - Števec: 249.103 taktov

Stanje: rabljeno, US-2100 - 75 mm Wider banding is increasingly required for the logistical and promotional bundling of units. The US-2100, featuring unique ultra-sonic sealing technology, processes paper and film bands with a width of 75 or 100 mm. The bands provide ample space for printing marketing-related information. The machine offers easy access, can be used in confined spaces, and provides a high level of safety. Dkedjwrp Inepfx Aplsl

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, The cartons are taken from the discharge conveyor of the folding box machine, stacked manually, and pushed onto the infeed conveyor of the US-2000 TRC 900. Inside the system, the stack is precisely aligned three times using the side guide and front stop, then pressed and banded. For the second banding operation, the front stop automatically shifts to the next position, which can be set via the display. A servo-driven conveyor motor allows for customized band tensioning, ensuring gentle banding of high-quality carton stacks with minimal edge damage. Processing capacity of up to 22 stacks per minute. Dsdpfx Aevcyw Asplokl

Stanje: novo, Leto izdelave: 2025, Tlačna peskalna kabina DSK 11.11.30. Peskalni prostor: širina 1050 mm, globina 1050 mm, višina 955 mm. 1 TÜV-preizkušen tlačni rezervoar 30 l s stožčastim iztočnim lijakom. 1 ventil za doziranje peskalnega sredstva s pnevmatskim uravnavanjem količine. 1 vgrajen zapiralni stožec z vodilno cevjo. 1 priključek za stisnjen zrak s pnevmatskim zapornim ventilom in iztokom za krmilni zrak. 1 regulator tlaka za nastavitev peskalnega tlaka. 1 peskalna cev DN19. 1 ročnik z bor-karbidno Venturi šobo 8 mm. 1 par peskalnih rokavic. Električno nastavljiva višina kabine za ergonomičen položaj telesa. Shranjevanje višinskih položajev v spominu za 3 nastavitve. Filter za odpraševanje 2000 m³/h 2,2 kW. Dkjdpfxega Ehbs Aplsl

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, ATS stroj za banderoliranje US-2000 TR Velikost loka: 360x260 mm Dkodpoxl Dn Tofx Aplol Širina traku: 30 mm Transit US-2000 TR banderolira embalažo v prehodu s kapaciteto do 25 embalaž/minuto.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, ATS Table Banding Machine MS-420S • Compact, mobile, and immediately ready for use • Highly user- and service-friendly • Suitable for various product sizes • Cost-saving • Marketing through banding Dksdpshk I Hrjfx Apljl

Leto izdelave: 2024, stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Dedehx Elfopfx Aplskl Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.