Vijačni kompresor GA37VSDFF

Atlas Copco GA37VSDFF

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 39.000 h, Funkcionalnost: popolnoma funkcionalen, Kompresor Atlas Copco model GA 37 VSD FF, servisiran, popolnoma ohranjen in pripravljen za uporabo. Naprava je tiha. Glavne značilnosti: Hedpey Dr E Hofx Agienk Maksimalni tlak: 13 bar Pretok: 6600 litrov/min Moč: 37 kW/50 KM Kataloška cena novega: 62.322 evrov

Leto izdelave: 2020, stanje: pripravljen za uporabo (rabljen), A compressor system from the plant manufacturer Rico, consisting of two Atlas Copco compressors, two refrigeration dryers, and a Beko oil-water separator, also by Atlas Copco, is available. 1) Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air delivery: 9.4 m³/min, operating pressure: 13 bar, motor power: 45 kW, motor speed: 4500 rpm, machine dimensions (L/W/H): approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. 2) Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45 kW, operating pressure: 18.5 bar, speed: 3000 rpm. 3) 2x refrigerated compressed air dryers Atlas Copco FX 15, air flow: 15 m³/min, operating overpressure: 13 bar, pressure drop: approx. 0.3 bar, refrigerant: R410A, refrigerant amount: 2050g, max. inlet air temperature: 60°C, machine dimensions (L/W/H): approx. 900mm/750mm/1000mm, weight: approx. 160kg. Hedsxdc Uvjpfx Agijnk 4) Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control scope: 2-6 compressors. 5) Oil-water separator Beko ÖWAMAT 15, throughput capacity: 6m³-30m³/min, oil outlet: DN40, tank volume: 115.5l, operating volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16 bar, machine dimensions (L/W/H): approx. 1100mm/550mm/800mm, weight: approx. 40kg. Total system hours: 8,656h, controller hours: 42,334h. Documentation available. On-site inspection possible.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 67.772 h, Funkcionalnost: popolnoma funkcionalen, Vijačni kompresor Atlas Copco GA37VSD+FF. 37 kW z 13 bar in 6,55 m3/min. Integriran frekvenčni pretvornik in sušilnik. Hnodpfoyilkcjx Agisk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, skupna masa: 1.195 kg, volumenski pretok: 7,25 m³/h, obratovalni tlak: 13 letvica, vhodna napetost: 400 V, ATLAS COPCO GA 37 VSD ff rotary screw compressor Variable speed drive (inverter controlled) Equipped with a refrigerated air dryer Motor: 37 kW Capacity: 7.25 m³/min Pressure: 13 bar Operating hours: 13,200 h Hodst Hdh Nepfx Agisnk The compressor is fully operational

Stanje: rabljeno, Leto izdelave: 1998, Overview This machine was built in 1998 by the French manufacturer Sidel. The machine is in very good condition, has already been professionally dismantled, and is stored in a warehouse. Technical Details Hnodperkgy Uofx Agisk - Capacity: 7,200 bottles/hour at 1.5L - Number of cavities: 6 (moulds not included) - Equipped with quick-change system for shell moulds - Number of heating modules: 10 modules - Neck personalization: 29/25 - Operating hours: 47,000 - Machine has been regularly maintained Machine is equipped with: - Sidel elevator for preforms to the unscrambler - Sidel preform unscrambler & feeding system - Sidel oven & blowing wheel for 6 moulds - Sidel control cabinet - Sidel PCC drive & control panel Comprehensive spare parts list available upon request.

Stanje: pripravljen za uporabo (rabljen), obratovalne ure: 20.000 h, Funkcionalnost: popolnoma funkcionalen, 1,46–7,25 m³/min, izmerjeno pred kratkim. Hodpfx Aoyg H Tcegisnk

Stanje: dober (rabljeno), Leto izdelave: 2009, PROD. ATLASCOPCO TIP GA37VSDFF S/N API580058 LETO 2009 MOČ (kW) 37 PRETOK (m³/min) 7,25 TLAK (bar) 12,5 URE (DOK/SKUPAJ) 100392 FREKVENČNIK da VGRAJEN SUŠILEC da, R404 1,25kg Hedjxyarqspfx Agionk IZMENJEVALEC ne HLADNJENJE (ZRAK/VODA) zrak NA REZERVOARJU ne DOKUMENTI ne PRIKLJUČEK 2' NOVO/RABLJENO RABLJENO

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2015, Used injection moulding machine directly from the manufacturer! As a manufacturer, KraussMaffei is offering one of our pre-owned injection moulding machines for sale. Hodpfonh Rnuox Agisnk CONTROL SYSTEM - MC4 TECHNICAL DATA CLAMPING UNIT - Clamping force: 5000 kN - Tie bar spacing (h x v): 900 x 800 mm - Max. mould opening distance: 1170 mm - Min. mould installation height: 480 mm - Platen opening stroke: 1650 mm - Ejector stroke: 250 mm - Ejector force: 95 kN (Reverse: 48 kN) INJECTION UNIT - Screw diameter: 90 mm - L/D ratio: 20 - Injection pressure: 1742 bar - Injection volume: 1953 cm³ - Shot weight for PS: 1777 g - Injection rate: 649 cm³/s - Nozzle contact force: 115 kN Electrical Parameters - Pump drive power: 90 kW - Heating capacity: 44 kW Weight and Dimensions - Net weight: 25.8 t - Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m We generally deliver this system in a fully functional basic condition. As the original manufacturer, we can also offer various additional options depending on individual requirements, such as: - Upgrades for energy optimisation of the system - Integration with KraussMaffei digital products, if required - Plasticising unit conversions - Optional: Organisation and management of delivery (not included in the price) - Optional: Installation and commissioning (not included in the price) You benefit from our premium service and the option to purchase spare parts packages for wear components to ensure seamless operation of your newly acquired pre-owned system. Don't hesitate, contact us now for further information!

Leto izdelave: 1992, stanje: zelo dobro (rabljeno), Gas burner Weishaupt WM-G50/2A version ZM Capacity: 600–5,200 kW Year of manufacture: 1992 Including Dungs DN50 gas train. We speak Russian! Viewing only by prior telephone arrangement! Preferred sale to dealers, commercial operators, or for export. All information provided without guarantee; subject to errors and prior sale. The seller assumes no liability for typing or data transmission errors. Hnjdpfxjhl In Ro Agiok We are happy to purchase your used boiler or burner! Of course, we can handle all formalities. Loading possible.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Deckel Maho DMU 80 P-Hi Dyn 5-osni CNC obdelovalni center Leto izdelave: 2002 Krmilje: Heidenhain 430 X-hod: 800 mm Y-hod: 700 mm Z-hod: 600 mm B-os: avtomatska nagibna rezkalna glava C-os: NC rotacijska miza 900x630 mm Teža obdelovanca: 800 kg Vpenjalo orodja: SK40 Menjalnik orodij: 60 mest Dodatna oprema: - Transporter ostružkov Hnedpjx Dlf Rsfx Agijk - Notranje hlajenje 40 bar - Ročno kolo - Merilna sonda Heidenhain TS 642