Vijačni kompresor S016381

Atlas Copco GA30VSDFF +

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, obratovalne ure: 68.578 h, Funkcionalnost: popolnoma funkcionalen, Vijačni kompresor Atlas Copco GA30VSDFF Frekvenčni pretvornik in sušilnik integrirana. 30 kW 12,80 bar Gedoyzftfspfx Af Soir 5,58 m³/min Leto izdelave: 2013 Obratovalne ure: 68.578

Leto izdelave: 2020, stanje: pripravljen za uporabo (rabljen), A compressor system from the plant manufacturer Rico, consisting of two Atlas Copco compressors, two refrigeration dryers, and a Beko oil-water separator, also by Atlas Copco, is available. 1) Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air delivery: 9.4 m³/min, operating pressure: 13 bar, motor power: 45 kW, motor speed: 4500 rpm, machine dimensions (L/W/H): approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Gsdpfjxdc Uvjx Af Ssir 2) Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45 kW, operating pressure: 18.5 bar, speed: 3000 rpm. 3) 2x refrigerated compressed air dryers Atlas Copco FX 15, air flow: 15 m³/min, operating overpressure: 13 bar, pressure drop: approx. 0.3 bar, refrigerant: R410A, refrigerant amount: 2050g, max. inlet air temperature: 60°C, machine dimensions (L/W/H): approx. 900mm/750mm/1000mm, weight: approx. 160kg. 4) Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control scope: 2-6 compressors. 5) Oil-water separator Beko ÖWAMAT 15, throughput capacity: 6m³-30m³/min, oil outlet: DN40, tank volume: 115.5l, operating volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16 bar, machine dimensions (L/W/H): approx. 1100mm/550mm/800mm, weight: approx. 40kg. Total system hours: 8,656h, controller hours: 42,334h. Documentation available. On-site inspection possible.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, PROD. ATLAS COPCO Gjdpfx Aoylyz Djf Soir TIP GA30VSDFF S/N API431056 LETO 2011 MOČ (kW) 30 PRETOK (m3/min) 5,58 TLAK (bar) 12,80 URE (DOK/SKUPAJ) 33.313 FREKVENČNIK da VGRAJEN SUŠILEC da IZMENJEVALEC ne HLADENJE (ZRAK/VODA) zrak

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2014, obratovalne ure: 43.965 h, Funkcionalnost: popolnoma funkcionalen, Rabljeni kompresor Atlas Copco GA30VSD+FF. Integriran sušilec. Integriran frekvenčni pretvornik. 30 kW. 13 bar. 5,85 m³/min. Gedoxu Ibcepfx Af Soir

Stanje: novo, Leto izdelave: 2026, Swing diameter over bed 460 mm Swing diameter over saddle 270 mm Turning length 1500 mm Centre height 230 mm Spindle bore 76 mm Drive power 11 kW - New machine - with 2-axis digital readout ACU-RITE incl. Gjdpfjwrma Usx Af Soir constant cutting speed mounted on saddle, MULTIFIX quick-change toolpost size MC * For more information about the exact standard equipment and available options, please visit our website or contact us directly *

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 23.170 h, vpenjalna sila: 2.500 kN, premer vijaka: 60 mm, tlak vbrizgavanja: 2.005 letvica, injekcijska masa: 618 g, minimalna višina orodja: 330 mm, Injection Moulding Machine Krauss Maffei 250-1400CX with Robot and Gas-Boost (225) Article number: 225 Availability: In stock Year of manufacture: 2016 Brand: KRAUSS MAFFEI Technical specifications Shot weight: 618 g Injection rate: 848 cc/s Clamping force: 2,500 kN Screw diameter: 60 mm Injection pressure: 2005 bar Tie bar spacing: 630x630 mm Platen size: 1135x1180 mm Minimum mould height: 330 mm Maximum daylight: 1150 mm Control system: MC6 Language: German Power: 70 kW Operating hours: 23,170 h Weight: 15,000 kg Dimensions: 6.5x2.3x2.3 m Hopper: No Core pull: Yes Euromap interface: Yes Air valve: Yes Heated channels: Yes Gas accumulator: Yes Gsdpfx Afsvtzkfj Sjir

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 28.600 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.000 kN, premer vijaka: 55 mm, delovna prostornina: 570 cm³, Clamping force: 2000 kN Maximum mold opening force: 101 kN Movable platen opening force: 50 kN Movable platen closing force: 42 kN Clamping plate (h x v): 915 x 915 mm Clearance between tie bars (h x v): 560 x 560 mm Mold opening stroke: 700 mm Minimum mold installation height: 550 mm Maximum opening width: 1250 mm Ejector stroke: 200 mm Ejector force fwd/rev: 58/28 kN Injection unit: Screw diameter: 55 mm L/D ratio: 23 Injection pressure: 2387 bar Shot volume: 570 ccm Shot weight (PS): 519 g Injection flow rate: 261 ccm/s Screw speed: 260 rpm Gisdpfxoxz Tq No Af Ssr Plasticizing rate: 49 g/s Nozzle contact force: 82 kN Electro-hydraulic equipment: Rated power of pump motor: 45 kW Installed heating power: 23 kW Number of cylinder heating zones: 6 Oil capacity: 525 l Dimensions and weights: Space requirement approx.: 6.00 x 2.10 x 2.10 m Total weight: 11,500 kg Max. mold weight: 2,535 kg Accessories: - Oscillation elements Additional equipment: - Electric plasticizing motor - Accumulator - 2 x core pull on moving platen - 1 x core pull on fixed platen - 2 x air valve - 8 x hot runner zones - Robot interface according to Euromap 67

Stanje: dober (rabljeno), Leto izdelave: 2011, Ref. št.: 18586 Proizvajalec: KRAUSS MAFFEI Tip: KM180-750 AX Električni stroji Leto izdelave: 2011 Enota za zapiranje Zapiralna sila: 180 ton Odpiralna pot: 1050 mm Razmak med stebri (š x v): 560 × 510 mm Min. vgradna višina: 200 mm Gisdsw E E Evjpfx Af Sjr Maks. vgradna višina: 600 mm Velikost plošče (š x v): 790 × 740 mm Brizgalna enota Premer polža: 50 mm Volumen brizganja: 393 cm³ Brizgalna masa PS: 357 g Tlak brizganja: 1892 bar Dimenzije in teža Dimenzije DxŠxV: 6,07 x 1,92 x 2,01 m Teža stroja: 6500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, 1 used injection moulding machine with robot Manufacturer: KRAUSS MAFFEI Model: CX250-1000 Year of manufacture: 2010 Clamping force: 300 tons Tie bar spacing: 630 x 630 mm Minimum mould height: 330 mm Opening stroke: 820 mm Screw diameter: 50 mm Max. shot volume: 432 cm³ Shot weight: 393 g/PS Control system: MC5 Gjdpfx Ajwcb Nrsf Soir Equipment: Robot: Krauss Maffei, type: LRX100S 2 core pulls on the moving platen High-wear-resistant injection unit

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, vpenjalna sila: 2.500 kN, Oprema: dokumentacija / priročnik, Krauss Maffei KM250-1400CX (2014) Clamping force: 250 t Gsdpfx Aoxqhfysf Sjir Screw diameter: 60 mm Tie bar distance: 630x630 mm Injection weight: 471 g (PS) Injection volume: 518 cm³ Type: Horizontal Drive: Hydraulic Clamping Unit 1. Clamping force: 2500 kN 2. Platen size (H × V): 695 × 1050 mm 3. Tie bar distance: 630 × 630 mm 4. Max. opening stroke: 630 mm 5. Mold height (min./max.): 320 / 830 mm Injection Unit 1. Installed drive power: approx. 87 kW 2. Screw diameter: 55 / 60 / 70 mm 3. Injection pressure: 2387 / 2006 / 1473 bar 4. Injection volume: 417 / 518 / 679 cm³ 5. Shot weight (PS): 379 / 471 / 618 g 6. Injection stroke: 210 mm 7. Max. injection speed: 120 mm/s Ejector System 1. Ejector stroke: 180 mm 2. Ejector force: 78 kN General Data 1. Machine dimensions (L × W × H): approx. 6.1 × 2.2 × 2.2 m 2. Machine weight: approx. 14.0 - 14.3 t 3. Total connected load: 87 kW 4. Hydraulic oil capacity: approx. 700 L _Machine Equipment:_ 1. BluePower servo pump drive system (energy-efficient servo hydraulics) 2. Hydraulic core pull 1× on operator side + pressure relief system 3. 8-circuit water manifold with solenoid valve shutoff 4. Hot runner control, 4 zones (ZE 88.5404) 5. MC6 control system with 19″ touchscreen TFT display 6. PV control for injection speed, hold pressure, back pressure 7. Event log / quality monitoring / cycle analysis / maintenance reminders 8. Energy-saving servo drive system BluePower LRX 150 Linear Robot (Payload &lt