Vijačni kompresor

Atlas Copco G15FF

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 175 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 340 kg, kapaciteta rezervoarja za gorivo: 500 l, volumenski pretok: 1.994 m³/h, raven hrupa: 67 dB, Atlas Copco G15FF Screw Compressor Specification: • Condition: used • Manufacturer: Atlas Copco • Model: G15FF • Output at 7.5 bar: 1,994 l/min • Output at 10 bar: 1,740 l/min • Main motor power: 15.0 kW • Air receiver: 500 l • Maximum working pressure: 10.00 atm • Load hours: 175 h • Total working hours: 715 h • Built-in refrigeration dryer • Electronic compressor parameter control • Soundproofed enclosure (only 67 dB) • CE compliant • Year of manufacture: 2022 • Weight: 340 kg Additional information: • The machine is in excellent technical condition and ready for immediate use • The photos shown represent the actual condition of the item for sale • Possibility to power on and inspect the machine on site • The price listed in the auction does not include VAT or transport costs Ksdpfjvkxrnjx Af Tsdg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Inventar livarne Kompleten inventar peščene livarne v Venlo-Lomm – Nizozemska Modelna linija HWS, tip SFM2 / 30 zabojev/uro Krmiljenje S/7 Lijak rezkar Stroj za streljanje jeder Röper H6,5-H16 hidravlični – krmiljenje S/7 Mešalec jedrnega peska znamke Klein YXLON rentgenska naprava Spektralna analiza Spectro Analizator Ideco Modelni stroji Priprava peska Talilne peči Trakasti brusilnik Kedpfx Afovz Apre Tjdg Zabojnik za nevarno blago Sušilna peč Tračna žaga Peskalni stroj Hali žerjav 32 t / žerjavna proga: 5750 mm / letnik 2002 Prisrčno vabljeni na ogled livarne Naprave in artikli se prodajajo rabljeni Prodajalec izključuje jamstva.

Stanje: novo, volumenski pretok: 1.994 m³/h, raven hrupa: 67 dB, vrsta hlajenja: zrak, pritisk: 10 letvica, vrsta vhodnega toka: trifazni, kapaciteta rezervoarja: 500 l, Oprema: dokumentacija / priročnik, Atlas Copco G15FF Rotary Screw Compressor - Brand New! Specification: • Capacity at 7.5 bar: 1994 l/min • Capacity at 10 bar: 1740 l/min • Main motor power: 15.0 kW • 500 l air receiver • Maximum working pressure: 10.0 bar • Integrated refrigerated dryer • Electronic control of compressor operating parameters Kodeq E Iraopfx Af Todg • Soundproofed enclosure (only 67 dB) Additional information: • The photos shown represent the actual item for sale • On-site inspection and operational testing possible • CE compliant • Polish user manual and complete documentation for UDT (Office of Technical Inspection) • Manufacturer’s warranty available • Available immediately or within 7 working days

Leto izdelave: 2025, Stanje: novo, Avtomatski podajalnik palet je hrbtenica vaših avtomatizacijskih procesov. Napolnjen je lahko z do 10 euro paletami (1200x800 ali 1200x1200), kar odpravlja potrebo po ročnem pripravljanju posameznih palet, prihranek časa in zmanjšanje fizične obremenitve zaposlenih. Namesto tega enota palete izdaja s pritiskom na gumb ali s prednastavljenim algoritmom na motoriziran valjčni transporter, ki jih transportira za nadaljnjo obdelavo. Model PD-10 se lahko uporablja v povezavi z različnimi rešitvami za paletizacijo. Kdodpjhbg Uxsfx Af Teg Sprejme do 10 euro palet Polni se z viličarjem Zmanjšuje fizično obremenitev Povečuje učinkovitost

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 620 h, Funkcionalnost: popolnoma funkcionalen, Kaeser Aircenter SM13-11 Screw Compressor (2021) Manufacturer: Kaeser Model: Aircenter SM13-11 Year of manufacture: 2021 Condition: Very good, used Kedpexnnd Rsfx Af Tedg Operating hours: 1,356 h Load hours: 606 h Next service at: 2,825 h Technical specifications Pressure: 11 bar Effective delivery rate: 1.08 m³/min Rated motor power: 7.5 kW Motor protection class: IP 54 Power supply: 400 V / 3 phase / 50 Hz Dimensions (W x D x H): 630 x 1200 x 1716 mm Weight: 400 kg Compressed air receiver: 270 l Compressed air connection: G 3/4 Sound pressure level: 64 dB(A) Refrigeration dryer Power consumption: 0.26 kW Pressure dew point: 3 °C Pressure drop: 0.2 bar Refrigerant: R 134a Energy-saving control: Yes Electronic condensate drain: Eco-Drain Electrical equipment EN 60204-1: Yes Scope of delivery: – Complete original documentation – RFID cards (2x) – 5 m power cable with 32A plug

Stanje: generalkompletno obnovljen (rabljeno), The fully overhauled vacuum pump is available from stock and ready for immediate use. We recommend installation to be carried out exclusively by trained personnel. Adaptation material is available upon request. Oil filling: M-VAC 100 Technical specifications: 50Hz / 5.5 kW / 11.5/6.6 A Final pressure with open gas ballast: 0.35 mbar Final pressure with closed gas ballast: 0.25 mbar Subject to prior sale! This offer applies only to customers within Germany and European countries! Kodoq S N Iijpfx Af Tsdg

Stanje: zelo dobro (rabljeno), Ponudba sestavljena iz: Polar 115 XT Plus, letnik 2011, stranske zračne mize, barvni zaslon na dotik, Plus izvedba, vključno z rezervnim rezilom, vključno z dodatki. Kdedpfx Afjx Srqlo Tog

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, leto zadnje generalne obnove: 2023, ATTENTION: Kdedpfxstpu Sze Af Teg THIS MACHINE AT A ONE-TIME SPECIAL PRICE. General Description: Year of manufacture: 2001/2023 Manufacturer: Emag Machine type: VL3 Technical Data: Control system: Fanuc 21i-T Swing diameter: approx. 210 mm Maximum speed: 6,500 rpm Turret: VDI 40 mm, 12 stations The machine does not have any live tooling. Hinged belt chip conveyor Spindle mount: Size 5 Conveyor belt for finished parts Machine weight: approx. 5.5 t The following work was carried out as part of the machine’s overhaul in 2023: -The machine was completely disassembled, cleaned, and repainted -The main spindle was newly mounted -The guides and guide shoes on X and Z axes were replaced -The ball screw spindle on the X and Z axes was replaced -New unit for central lubrication with new hoses -The hydraulic unit was checked and serviced. The drive coupling between motor and pump was replaced -The cooling unit was checked and serviced: Temperature differential controller was replaced -The clamping cylinder was re-bedded and re-sealed -The gearbox on the A-axis was newly mounted, and the coupling between motor and gearbox was replaced -Electrical cabinet was cleaned -Operator panel was replaced -New monitor -New internal lighting -Turret was disassembled, wear parts checked, cleaned, and re-sealed -Turret encoder and encoder wheel cleaned -Linear measuring systems in X and Z axes disassembled and cleaned -Springs at the pick-up station replaced -Motors for X and Z axes checked for bearing damage -Windows on work door replaced -Chip conveyor completely disassembled, newly mounted, cleaned, and repainted -Of course, various small parts were also replaced on the machine The product has been described by us with the utmost care. The description is non-binding and should be verified during inspection.

Leto izdelave: 2016, Stanje: skoraj kot novo (rabljeno), Offered is a vertical turning and grinding center VLC 100 GT, retrofitted in 2022. Kdjdpfxsh Tm Dus Af Tog With the pick-up spindle unit, workpieces can be fed directly from the side-mounted conveyor belt into the working area. Thanks to its modular design, the VLC 100 can be configured for a wide range of applications. The images show, for example, a combination of turning tools (block tool holders) and grinding spindles for soft or hard machining (internal, external). Depending on the workpiece or machining technology, these machining modules can easily be adapted. CONTROL Siemens 840Dsl TECHNICAL DATA Max. workpiece diameter: 100 mm Max. workpiece height: 150 mm X-axis travel: 605 mm Z-axis travel: 530 mm PERFORMANCE Main spindle: 18 kW Grinding spindle: 12 kW TOOL HOLDER 2x block tool holders VDI / Capto Console with grinding spindle 12 kW, 60,000 rpm Price, delivery time, and machine specifications upon request.

Stanje: rabljeno, Leto izdelave: 2011, A well-maintained EMAG laser welding system with EMAG ultrasonic testing unit, including Rofin laser, type: DC 060, year of manufacture 2009. Kdjdpfx Afeixxqko Tog Without extraction system. The system was used for welding gears with coupling rings. Diameter: 60–80 mm. Weld seam depth: 4–6 mm.