Vijačni kompresor g 11 novo leto 2025

Atlas Copco G 11

Stanje: novo, Delivery pressure: 11 bar Suction capacity: 480 cm³ Nsdpfovkizgex Abbjcl Volumetric flow rate: 360 (unit missing – please specify, e.g., l/min) Tank capacity: 270 l / bar Number of cylinders: 1 pc. Motor: 400 Volt / 3.0 kW Speed: 892 rpm Machine weight: approx. 200 kg Dimensions (L x W x H): 1.6 x 0.7 x 1.2 m

Stanje: novo, Leto izdelave: 2024,

Stanje: novo, skupna masa: 340 kg, Atlas Copco G11FF Screw Compressor Specification: • Condition - New • Manufacturer - Atlas Copco • Output - 1440 l/min • Main motor power - 11.0 kW • Tank capacity - 500 l • Maximum working pressure - 10.00 bar • Integrated refrigeration dryer • Electronic control of compressor operating parameters • Soundproofed enclosure (only 67 dB) • CE compliant • Weight - 340 kg Additional information: • Manufacturer's warranty available upon commissioning by an authorized Atlas Copco service • User manual in Polish and complete UDT documentation included • Available immediately or within 7 working days Ncsdsh Unupopfx Abbsl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Atlas Copco G11 - 10 P Screw Compressor Fully automatic, internally fully piped and wired compact unit, single-stage oil-injected compression, air-cooled, soundproofed. Ncsdpfewldtrjx Abbsl Final pressure: 10.00 bar Motor power: 11.00 kW Free air delivery: 1.44 m³/min

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 620 h, Funkcionalnost: popolnoma funkcionalen, Kaeser Aircenter SM13-11 Screw Compressor (2021) Manufacturer: Kaeser Model: Aircenter SM13-11 Year of manufacture: 2021 Condition: Very good, used Operating hours: 1,356 h Load hours: 606 h Next service at: 2,825 h Technical specifications Pressure: 11 bar Effective delivery rate: 1.08 m³/min Rated motor power: 7.5 kW Motor protection class: IP 54 Power supply: 400 V / 3 phase / 50 Hz Ncedpfxexnnd Rs Abbjl Dimensions (W x D x H): 630 x 1200 x 1716 mm Weight: 400 kg Compressed air receiver: 270 l Compressed air connection: G 3/4 Sound pressure level: 64 dB(A) Refrigeration dryer Power consumption: 0.26 kW Pressure dew point: 3 °C Pressure drop: 0.2 bar Refrigerant: R 134a Energy-saving control: Yes Electronic condensate drain: Eco-Drain Electrical equipment EN 60204-1: Yes Scope of delivery: – Complete original documentation – RFID cards (2x) – 5 m power cable with 32A plug

Stanje: novo, Holzkraft minimax si 400es 32 Panel Saw 5504754 Heavy-duty professional version with scoring unit and anodised aluminium sliding table. Scoring unit equipped with its own drive, easily adjustable from outside Smooth-running, precise format sliding table made of anodised aluminium with proven, permanently smooth-running ball contact system on hardened guides; 10-year warranty on wear of the guide rails Large-area outrigger table (longitudinally adjustable) with material roller on telescopic arm Extendable telescopic crosscut fence with two fold-down stops Precision rip fence, foldable for large panels, with quick-release and integrated fine adjustment Standard equipment includes table extension, table enlargement, and excentric clamp Saw assembly made from a robust cast iron ring with permanently precise dual trunnion support and zero-point tilting for smooth and perfect cuts, 6-year Holzkraft warranty on trunnion wear Large-area worktable made of stress-relieved cast iron High dead weight ensures precision and smooth operation Equipped with a powerful three-phase motor Version M: Electric height adjustment and tilting of the saw unit, digital tilt display Version A: On/off switch on the sliding table Version M A 3: Programmed control of saw blade height and tilt as well as rip fence positioning; stepless positioning of the rip fence via switch or automatic positioning system; position display via encoder, adjustment via ball screw, possibility for incremental adjustment Version UP: Swivelling control panel at eye level Made in Italy TECHNICAL DATA: Dimensions and Weights Weight (net) approx. 715kg Njdpjkkrm Refx Abbscl Extraction port Extraction port diameter 120mm Extraction port diameter for blade guard 80mm Installation information Transport width 990mm Machine body length 1900mm Machine body width/depth 885mm Space required length 7180mm Space required width/depth 4860mm Space requirement explanation: Dimensions consider maximum travel or usable lengths Working area length 1600mm Working area width/depth 2300mm Working area explanation: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical Data Connection voltage 400V Network frequency 50Hz Scoring motor power 0.55kW Main drive motor power 7.0kW Rated operating mode main motor S6 Duty cycle main motor 40% Sliding Table and Work Table Sliding table length 3200mm Sliding table width 360mm Sliding table height 142mm Table length 940mm Table width 560mm Table height 900mm Saw Unit Cutting width with rip fence 1270mm Max. crosscut width left of saw blade 3260mm Edging length 3200mm Saw blade tilt 90 – 45° Max. cutting height 90° 136.5mm Max. cutting height 45° 97mm Max. cutting height explanation: Independent from scorer Saw blade diameter 400mm Saw blade diameter explanation: Independent from scorer Saw blade speed 4000rpm Scoring Unit Scoring blade diameter 120mm Scoring blade speed 9200rpm Holzkraft Specialist Dealer – Accessories available on request!

Stanje: novo, Leto izdelave: 2022, Carriage length: 3200 mm Cutting width at rip fence: 1270 mm Cutting width at cross-cut fence: 3200 mm Cutting depth: 136.5 mm Scorer: Yes Saw blade tilt range: +45° Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: manual Saw blade angle display: digital readout Cutting height display: - Rip fence display: scale Cross-cut fence display: scale Nodpeh Uch Isfx Abbjcl Scorer adjustment: manual Saw blade diameter: 400 mm Speeds: 4000 rpm Motor power: 7 kW Extraction port: 80 and 120 mm Machine length: 3500 mm Machine width: 2200 mm Weight: 715 kg

Leto izdelave: 1992, Stanje: pripravljen za uporabo (rabljen), Max. paper size: 720x1040mm, min. sheet size (straight printing): 360x520mm, perfecting: 440x520mm, paper thickness: 0.06–0.5mm, max. print area (straight printing): 710x1030mm, perfecting: 700x1030mm, max. output (straight/perfecting): 7000/5000 sheets/h, recommended plate size: 790x1045mm, printing start: 48mm, gripper margin (non-printable): 10.5mm ±1mm. Ncjdpfew Azubjx Abbol Equipment: Basic machine Miller TP 104 with two printing units, sheet reversal between first and second printing unit, numbering tower with control system for installation of mechanical numbering units by Zeiser and Leibinger (numbering units not included), Spiess TP 104/1 sheet feeder, load: 10,000N. Remote adjustment from operator console: color control for 1st and 2nd printing units, fine setting for circumferential and lateral register: ±1.5mm, plate cylinder, 2x front plate clamping bars – single-piece – rear divided only, blanket cylinder washing device – completely defective, cleaning by hand, powder sprayer without additional regulation, delivery extension with additional area after numbering unit of approx. 1.85m, 10x inking rollers, 8x ink transfer rollers, 1x blanket roller, 1x wash-up roller, 1x ductor roller, complete documentation.

Stanje: rabljeno, Leto izdelave: 2004, Technical details: Operating pressure: 9.75 bar Output per minute: 10.1 L Total power requirement: 5.5 kW Volume flow: 10.1 m³/min Operating hours: 26,071 h Motor speed: 3,000 rpm Njdpfxsu Szluo Abbocl Protection class: CE 0038 Machine weight approx.: 310 kg Dimensions (L x W x H): 1.2 x 0.6 x 1.0 m Condensate separator installed. Limitation: Overload valve does not switch off automatically. Sold as is.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Steinemann (HIBIS 104) Baujahr 2007 Rotations-UV-Oberflächenlackiermaschine mit Anilox-Walzen, maximales Bogenformat 74 x 104 cm, automatischer Sauganleger mit Hinterblattvereinzelung, Stapler UV-Trocknungsmodul IR-Trocknungsmodul Ncedpsvhc Sgsfx Abbol Mirus vollautomatischer Stapler, Bogengewicht von 80–400 g/m², Geschwindigkeit bis zu 7.300 Bogen/h, In ausgezeichnetem Zustand und sofort vorführbereit Maschine verarbeitet im täglichen Einsatz regelmäßig 60 µm Material einwandfrei Sehr guter Zustand Sofort verfügbar