Hidravlične giljotinske škarje

ATLANTIC XTSL 4006

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1994, delovna širina: 4.000 mm, najv. debelina pločevine: 6 mm, zadnji prislon: 700 mm, skupna masa: 7.500 kg, razdalja med stojali: 4.010 mm, TEHNIČNI PODATKI Širina pločevine: 4.000 mm Debelina pločevine: 6 mm Razmak med stebri: 4.010 mm Zadnji prislon: 700 mm Hsdpeyhmfzefx Adkeni PODROBNOSTI STROJA Teža stroja: 7.500 kg Skupna moč: 16 kW

Leto izdelave: 2002, stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Hnjdpfxohzbipo Adkoi Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), Na voljo je popolnoma opremljen bistro. Sestavni deli: 1) Pomivalni stroj s prehodom. 2) Pohištvo. 3) Mala in velika kuhinja. 4) Oprema za stranke kot so mize, stoli in samopostrežni pulti. 5) Hladilniki. 6) Cvrtniki in žari. 7) Blagajne in tehtnice. 8) Posoda, krožniki itd. 9) Prezračevalni in filtrirni sistemi. Dokumentacija je na voljo. Ogled na lokaciji je možen. Hodpfoxc Nhmex Adkjni

Stanje: pripravljen za uporabo (rabljen), Oprema obsega: - 3 odvijalce Elba s kapaciteto 5 ton - 1500 mm - Ravnalo RAS 26.45 - Enota za izsekavanje vogalov Ras - Hidravlična enota Ras za valjanje ojačitvenih reber v pločevini - Škarje Ras za rezanje na dolžino RAS 82.16 - Upogibni stroj Ras hitrost: 15 m/min Moč: 16 kW Hjdpfxjwwbf Nj Adksni

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Sheet width: 3230 mm Sheet thickness: 2.5 mm Sheet thickness (stainless steel): 1.5 mm Strokes: 28 - 42 strokes/min Cutting angle: 1.60 degrees Table height: 820 mm Distance between uprights: 3540 mm Control: ELGO 87P Motor power: 6.8 kW Hjdpfx Adexacd Njkjni Machine weight: approx. 3410 kg Dimensions (LxWxH): 4070 x 2070 x 1400 mm From a maintenance workshop Including special accessories (!!) Features: - Heavy-duty, motorized swing-beam guillotine shear - Break-proof, torsion-resistant steel weldment construction - Compact and clearly laid out machine design - NC electro-motorized back gauge - Including NC ELGO "Type 87P" digital control unit * Adjustable from the front right * Actual/target value position input * Stepless adjustment through entire travel range * Coarse adjustment via push buttons * Limit protection by end stops - "Duo-Cut" drive with two dynamic, high-performance gear motors - Support table with handgrips - Hold-down beam with hard rubber strip - Fully steel, double-edged blade - Selector switch for single and continuous stroke - 1x free-moving foot switch - Rear safety device - Original operating manual Special accessories included: - Pneumatic sheet support device for thin sheet cutting - 1x extra-long side stop, including support foot and digital stop - 2x extra-long, front support arms * With "SLIDING" mounting – for easy shifting

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Pressure: 100 t Bending length: 2250 mm Distance between uprights: 2050 mm Stroke of press beam: 275 mm Vertical opening between upper and lower beam: 410 mm C-frame depth: 300 mm X-axis travel (CNC programmable): 550 mm Z1+Z2 axis travel (CNC programmable, manual adjustment, 4 backgauge fingers): mm R-axis travel (CNC programmable): 130 mm Approach speed: 100 mm/sec Bending speed: 0–10 mm/sec Opening speed: 100 mm/sec Operating hours: 13,000 h Length: 3500 mm Width: 2000 mm Height: 2600 mm Weight: 5700 kg Total power requirement: 9 kW Space requirement approx. 4x2x2.7 m All machines can be inspected under power at any time. Machine demonstrations possible at any time. Hnsdovzcm Dopfx Adkji Front safety light curtain, motorized adjustment (Fissler) Rear SICK safety light curtain Manual crowning Promecam tool holders

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, Hnjdst Hw Shjpfx Adkji specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1999, Sheet width 3000 mm Sheet thickness 3 mm 3 support arms 1 angle gauge Hnedpfx Adjr Ngtiokei Pneumatic hold-down device Back gauge operated manually

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1998, delovna širina: 2.000 mm, stiskalna sila: 35 t, Pressure: 35 tons Max. bending length: 2000 mm Backgauge Hsdpfx Adewagykekoni Drive power: 4.5 kW Weight: 3000 kg

Stanje: rabljeno, Leto izdelave: 1978, Sheet width: 3100 mm Sheet thickness: 2 mm Backgauge: 1000 mm Cutting angle: 1°06’ Strokes per minute: 45 spm Total power requirement: 3.0 kW Hjdpfx Aouagxpodkoni Space requirements (approx.): 3600 x 2200 x 1600 mm Weight: 4500 kg Equipment: - Electrically powered backgauge - With digital ELGO position display - Manual blade gap adjustment - 1x side gauge with mm scale - 2x support arms - 1x free-moving double foot pedal - Front finger guard Special accessories included: - Pneumatic sheet support device for cutting thin sheet metal