Mobilni ovijalec palet

ATLANTA - mobiler StretchWickler SFERA Easy PowerStretch 120-400%

Stretch Wrapper ATLANTA SFERA Easy

6 individually programmable wrapping cycles
Maximum wrapping height: 2,150 mm
Mast height: 2,050 mm (fits through almost any doorway)
Film power stretch: 120-400%
Motorized pre-stretch system with infinitely variable adjustment
Pre-stretch ratio adjustable via operator panel from 120 to 400%
Film application tension electronically controlled by central control unit
Quick-load IEF system for easy film roll replacement
Film specification: Max. external diameter Ø300 mm – height = 500 mm – core Ø76 mm
Film tension can be stored in 4 steps
Geomagnetic compass (GMK): always stops at the position from which it started
Manual rope formation at the film carriage to reinforce the wrapping pattern

TECHNICAL DETAILS:
Two maintenance-free AGM batteries 12 V – 100 Ah (in series)
Up to 160 pallets per battery charge – charging time: 8-10 hours
Fodpfxerqgivs Ah Djpn
High-frequency battery charger with LED indicator
Wrapping height "Machine with mast (pallet inclusive)": 2,150 mm
Height detection by light sensor or manual entry on the display
Protective bar for emergency stop of drive unit
Emergency stop switch according to CE regulations
Audible warning signal and warning light when machine starts
Fall protection for the film carriage
Push button for Start & Stop
Machine operation compliant with CE standards, connection diameter Ø22 mm

ADJUSTABLE PARAMETERS VIA OPERATOR PANEL:
All functional parameters adjustable via display
F00 - Display lock for program changes
F02 - Adjustable machine speed around the pallet, up to 80 m/min
Carriage lifting speed up and down can be set independently
F03 - Carriage lift speed upward: 1.3 to 5.4 m/min
F04 - Carriage lift speed downward: 1.3 to 5.4 m/min
F05 - Number of wraps at pallet base (1-10 wraps)
F06 - Number of wraps at pallet top (1-10 wraps)
F09 - Set wrapping height
F13 - F16 - Film tension at base & head wrapping / up & down independently adjustable
F17 - F20 - Film pre-stretch at base & head wrapping / up & down independently adjustable
F62 - Ergonomic height for film change
Film consumption display (option for PRS – PS)

ADJUSTABLE WRAPPING PROGRAMS VIA OPERATOR PANEL:
6 storable wrapping programs for SFERA EASY
F01 - 1 - Cross wrapping (up/down)
F01 - 2 - Simple wrapping (only up or only down)
F10 - F11 - Wrapping cycle with predefined start and stop heights
F12 - Wrapping to a set height (bypassing height sensor)
F21 - Wrapping cycle for large-dimension pallets
F22 / F23 - Wrapping cycle for cover sheet film
F29 - Soft start cycle for edge protection placement
F30 - F31 - Wrapping cycle with reinforcement and adjustable wrap count
Soft start to reduce film tears on sharp pallet edges
Wrapping cycle with manual or motor-driven rope formation (optional)

Additional units in stock in Ludwigsburg.
Was used as a customer replacement unit.
Excellent condition.
Immediately available.
Inspection possible in Ludwigsburg by appointment.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.