Asyst PNC100

Asyst PNC100

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Type of machining: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table dimensions: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L X, Y, Z, U and V axes Travel X, Y, Z: 550 x 350 x 400 mm Rjdpfjw Ucyujx Abhjn Travel U, V: 550 x 350 mm Collision protection: X, Y, U, V, Z axes Taper cutting, max. angle: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options 0.1/0.2/0.3 mm) Wire guide type: closed diamond, no gap Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum achievable surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measuring resolution: 0.5 micron Servomotors: AC type All technical data is given without obligation and subject to errors or omissions.

Stanje: rabljeno, Stroj za ravninsko brušenje s lončastim brusom / Stroj za brušenje glav valjev Največja brusilna površina pribl. 550 x 250 mm Rsdpfjwlbz Tox Abhon Elektromagnetna vpenjalna plošča 500 x 200 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Stanje: dober (rabljeno), Leto izdelave: 2001, dolžina brušenja: 650 mm, širina brušenja: 525 mm, skupna višina: 350 mm, dolžina mize: 600 mm, širina mize: 350 mm, Manufacturer: Geibel & Hotz Model: FS 635-Z SA Control: Digital readout Year of manufacture: 2001 Magnetic table 600 x 350 mm Rsdpovdal Asfx Abhjn Enclosed housing for CE compliance Vertical automatic feed (SA) Automatic lubrication Coolant tank Specifications Metric / US Standard X-axis 650 mm Y-axis 525 mm Z-axis 350 mm Table length 600 mm Table width 350 mm Table load capacity 400 kg Feed rate X-axis 35,000 mm/min Feed rate Z-axis 1,000 mm/min Grinding wheel size 300 x 50 x 76.2 mm Power 3.7 kW Speed 2,800 rpm Dimensions (approximate) Length 3,200 mm Width 2,000 mm Height 2,870 mm Weight 2,300 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or contractual terms. We recommend verifying all important details.

Stanje: rabljeno, Leto izdelave: 1982, Grinding length: 500 mm Grinding width: 225 mm Workpiece height: 400 mm Total power requirement: 5.5 kW Rjdpfocxxtmjx Abhon Machine weight approx.: 3.4 t with NC control NC81, table toothed belt drive 100-25000 mm/min, automatic infeed, electronic straight dressing with speed compensation, coolant pump, emergency stop safety device

Stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm–0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. An on-site inspection is possible. Rsdsuqackepfx Abhjn

Stanje: rabljeno, Leto izdelave: 1969, Grinding length: 500 mm Grinding width: 200 mm Workpiece height: 250 mm Total power requirement: 5.5 kW Machine weight approx.: 2,500 kg Required space approx.: m J U N G Rjdpst Hwziofx Abhsn Horizontal Precision Surface and Profile Grinding Machine Model: HF 50 RD Year of manufacture: approx. 1969 Machine No.: 4082 Maximum grinding length: 500 mm Maximum grinding width: 200 mm Table size: 600 x 200 mm Table speed: 1 – 20 m/min Working height under grinding wheel: approx. 350 mm Grinding wheel dimensions: 225 x 25 x 51 mm Grinding wheel speed, stepless: 1,000 - 4,500 rpm Vertical infeed: 0.001 - 0.01 mm/stroke Grinding spindle drive, stepless: 0.5 to 1.5 kW Total drive: approx. 6 kW - 380 V – 50 Hz Weight: approx. 2,500 kg Accessories / Special Equipment: • This design is particularly suitable for grinding high-alloy tool steels, thanks to the stepless speed range. • Automatic infeed of the grinding slide for both surface and profile grinding tasks, with automatic infeed stop via dial gauge, plus dial indicator mount and dial gauge for height control. • Machine configurable for standard grinding method with and without infeed, with continuous cross feed or table reversal, or for plunge grinding without traverse. • Manual straight dresser mounted above the grinding wheel • Built-on permanent magnetic chuck approx. 400 x 200 mm, tiltable • Separate wet grinding unit with coolant tank and band filter • Separate converter cabinet for stepless speed regulation and cutting speed display • Approx. 3 flanges with and without grinding wheels, motorized rapid grinding head traverse Condition: Good – ready for demonstration under power, partially overhauled by professional company (piston rods, lubrication, infeed, dresser, bellows, etc.) Delivery: Ex-stock – as inspected Payment: Net – upon receipt of invoice

Stanje: dober (rabljeno), Leto izdelave: 1992, 1 used surface grinding machine Rodei Ra Tyjpfx Abhon Manufacturer: ELB Model: SUPER - RUBIN 024 CNC Year of manufacture: 1992 Travel paths: Grinding length: 600 mm Grinding width: 275 mm Grinding height: 375 mm Table clamping surface: 900 x 300 mm Table load capacity: 300 kg Vertical feed: max. 300 mm/min Cross feed: max. 2,000 mm/min Control system: UNICON Grinding wheels are included in the scope of delivery, see photos.

Stanje: rabljeno, Leto izdelave: 2003, Die-sinking EDM machines / Electrical Discharge Machines Travel X-axis: 350 mm Travel Y-axis: 250 mm Travel Z-axis: 300 mm Table size X: 500 mm Table size Y: 400 mm Max. workpiece size X: 780 mm Max. workpiece size Y: 530 mm Max. workpiece size Z: 300 mm Max. electrode weight: 50 kg Max. workpiece weight: 500 kg Rsdpfxovyzf No Abhen Electrode changer: 4-position Generator: 64 Amps Lowerable tank Charmilles control system

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, obratovalne ure: 250 h, Lapping stroj Stähli FLM 750 Proizvajalec: Stähli Läpp Technik AG Tip: FLM 750 Leto izdelave: 2013 Napetost/Frekvenca: 3x400V + N + PE / 50Hz Poraba moči: 11,5 kW Maksimalni tok: 25 A Teža: 2500 kg Premer rotacijskega stola: 750 mm Notranji premer izravnalnega obroča: 300 mm Rodpfxjxpnnxj Abhjn Hitrost vrtenja: 6–75 obr/min Pogon moči: 4,0 kW Pnevmatični cilindri: 3 kosi Dovod stisnjenega zraka: 6–10 bar Dimenzije: 1700 x 1250 x 2200 mm Raven hrupa:

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, obratovalne ure: 1.000 h, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 380 mm, stružna dolžina: 350 mm, premer struženja: 200 mm, potovalna razdalja osi X: 240 mm, hitro pomikanje X-os: 12 m/min, Hembrug CNC stružno-rezkalni stroj Model: Slantbed Mikroturn 100 CNC Krmiljenje: Siemens 840D Dejanske delovne ure (približno): 1.000 Hidrostatni vreteno Hidrostatne vodila Linearno merjenje položaja Vzmeten granitni ležaj Ohišje vretena iz granita Hladilna črpalka Obtočna črpalka hladilne tekočine Pnevmatiko čiščenje ležajev Hidravlično uravnavanje temperature Upravljanje temperature hladilne tekočine Povratna oljna črpalka in rezervoar za oddaljeno postavitev hidravlične/hladilne enote Možnosti in dodatno kupljene funkcije: Konjiček Vakuumska črpalka za vakuumsko vpenjanje Programsko nadzorovan sistem za pršenje emulzije C-os za rezkanje/vrtanje Renishaw merilna tipala za orodja Brezkontaktni merilni sistem za orodja Sušilnik in filter za vstopni zrak Vrednosti v tisočih dolarjev - popolnoma novo orodje: Živi koničnik Adapter konjička 8” Micro-Centric pnevmatska vpenjalna glava 3x Sauter ravne motorizirane glave za orodje 2x Sauter 90° motorizirani glavi za orodje 1x poseben VDI ekscentričen nosilec orodja 16x VDI nosilci za orodja za struženje, vrtanje in centrično vrtanje Videosistem za prevzem orodij Dodatni rezervni trdi disk s popolnoma naloženo in testirano programsko opremo Dodatna Siemens kontrolna plošča Popoln komplet dokumentacije Nadgradnje stroja, ki sem jih dodal dodatno: Nov digitalni trdi disk Nov rezervni trdi disk s prednaloženo programsko opremo, pripravljen za uporabo brez izpada Nova Heidenhain merilna letev za Z-os Previto motor hidravlične črpalke – originalni motor je deloval prevroče Rsdpswcfgbjfx Abhen Zamenjana operaterska plošča – osvetlitev monitorja je odpovedala, originalna je priložena, treba zamenjati osvetlitev 15 m podaljšek za vezje za oddaljeno postavitev hidravlične/hladilne enote.