Zobniški motor 0,12 kW

ASUG VEM GWWN 1052 KMR 56 K 4

Stanje: rabljeno, Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 120 mm, največja širina rezanja: 350 mm, Mehrblattkreissäge + Besäumer CML Modell J 350 RT Ce, 37 kW Laedpfxsvlxbxj Ac Uef

Stanje: novo, Cutting capacity at 90 degrees: round 500 mm Cutting capacity at 90 degrees: square 420 mm Cutting capacity at 90 degrees: rectangular 600 x 400 mm Saw blade length: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Table height: 805 mm Total power requirement: 3.0 kW Machine weight: approx. 1.45 t Space requirement: approx. 1.72 x 2.5 x 2.5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • Miter angle left & right up to 60° • Frequency-controlled saw drive • 34 mm blade height • Wear-free, ball-bearing mounted swiveling material support table • Saw blade guides adjustable via extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • 2 integrated support rollers left and right • Removable chip tray (for cleaning/disinfection) • Free-standing, safe and ergonomic control panel • Storage space for saw blades and consumables • Hydraulic cutting pressure control valve Ledpfoupxupjx Ac Ueaf • Material height sensor (automatic cut start detection) • Super-fast pre-tensioning (front loading) • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Minimum cutting diameter round from 10 mm Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid feed down to material or, for serial cutting, direct cutting 4. Switch off saw blade 5. Raise frame just above material 6. Open vise

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, EMCO VMC 600, Siemens Leto izdelave: 2000 Ledpfxoxxakwe Ac Usaf

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, moč: 8,75 kW (11,90 KM), stiskalna sila: 25 t, hod: 500 mm, obratovalna hitrost: 100 mm/s, hitrost vzvratne vožnje: 450 mm/s, širina mize: 630 mm, dolžina mize: 500 mm, širina plošče bata: 450 mm, dolžina plošče bata: 360 mm, razmak između stupova: 800 mm, skupna dolžina: 16.500 mm, skupna širina: 10.500 mm, skupna višina: 27.500 mm, skupna masa: 2.200 kg, hod blazine orodja: 160 mm, Hidravlična stiskalnica PYE 25 S1M z izmetalnikom. Leto proizvodnje 1987. Proizvajalec VEB Wema Zeulenroda (Nemčija). Parametri: Maksimalna stiskalna sila 25 ton. Delovni tlak 16 MPa. Lajdpfx Acotzwxds Uof Zgornja miza 450 x 360 mm. Spodnja miza 630 x 500 mm. Prehod 800 mm. Hod bata 500 mm. Hitrost navzdol 100 mm/s. Hitrost navzgor 450 mm/s. Sila spodnjega izmetalnika 10 ton. Hod spodnjega izmetalnika 160 mm. Poraba moči 8,75 kW. Teža 2200 kg. Višina 2750 mm, dolžina 1650 mm, širina 1050 mm. Tehnično stanje stroja zelo dobro. Stroj po generalnem pregledu. Možen ogled in testiranje stroja v obratovanju.

Stanje: dober (rabljeno), Robland thickness planer-jointer 3 Tersa knives Ljdpfxovyhmgs Ac Ueaf 1 feed speed for thickness planing Maximum thicknessing height: 230 mm Noise-reducing combs in the table Table length: 140 cm Machine in good working condition, ready for operation

Stanje: novo, Description Worktable made from heavily ribbed cast iron and base frame from welded steel ensure torsional rigidity and vibration-free operation. Unique in this performance class: Format sliding table made of anodized aluminum for maximum cutting precision. Cutting plane located directly at the saw blade. Saw blade tiltable from 90° to 45°. Squaring frame with aluminum crosscut fence and adjustable stop for panels and large workpieces. Spindle moulder guard for profiling operations. Two independent motors for each working unit. TECHNICAL DATA Dimensions and weights Weight (net) approx. 190 kg Dust extraction connection Dust extraction port diameter: 120 mm Saw blade guard extraction port diameter: 60 mm Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Duty cycle of drive motor: S6 Drive motor duty cycle: 40% Drive motor power: 2 x 1.8 kW Sliding table and worktable Format sliding table length: 1140 mm Format sliding table width: 201 mm Format sliding table height: 70 mm Table length: 1040 mm Table width: 224 mm Spindle moulder Laedpfx Acovwfqws Uof Spindle shaft diameter: 30 mm Usable spindle length: 75 mm Spindle speeds: 5000/7500 rpm Max. spindle tool diameter Max. tool diameter: 160 mm Max. tool diameter (tenoning): 200 mm Panel saw unit Squaring length: 1200 mm Cutting width with rip fence: 700 mm Max. crosscut width left of saw blade: 1200 mm Saw blade tilting range: 90 – 45° Max. cutting height at 90°: 75 mm Max. cutting height at 45°: 60 mm Max. blade projection at 90°: 67 mm Max. blade projection at 45°: 40 mm (Main) saw blade diameter: 250 mm (Main) saw blade speed: 4000 rpm Features Anodized aluminum format sliding table Squaring frame with angle-adjustable crosscut fence, flip stop, and degree scale Saw rip fence Eccentric clamp Table extension Milling fence with wooden fence jaws Manual height adjustment of spindle Manual height adjustment of saw blade Manual tilt adjustment of saw blade

Stanje: dober (rabljeno), Regulator amplifier, servo motor control, power controller, thyristor power controller, thyristor controller, power regulator - Manufacturer: Gefran, power controller, power regulator - Model: GTF-25-480 - Quantity: 5x power controllers available - Price: per unit Ledpfeubfyhjx Ac Uoaf - Dimensions: 150/60/H135 mm - Weight: 0.9 kg/unit

Stanje: novo, - NEW - Description Cutting plane directly at the saw blade Heavy-duty steel cast iron construction Precision-guided sliding table made of aluminum, anodized as standard Large support table on telescopic arm, longitudinally adjustable Extendable aluminum telescopic fence, angle-adjustable with professional fence stoppers Parallel fence with quick-lock and fine adjustment Large, milled cast iron working table remains permanently flat Standard table extension and table enlargement enable easy processing of larger workpieces Smooth running and precise cuts Equipped with a powerful three-phase motor The large-dimensioned saw unit made from cast iron is double-mounted on the cast table, ensuring stability, precision, quiet operation, and long service life Maximum cutting height is achieved even with scoring unit installed Equipment features: Double trunnion saw unit Large, made of steel/cast iron Close to the saw blade, mounted on both sides for precision, smooth running, and long service life Height and tilt (up to 45°) adjustable via hand crank Maximum cutting height is achieved even with scoring unit installed Also available with scoring unit Telescopic fence Extendable telescopic fence up to max. 2550 mm Angle-adjustable With professional fence stoppers Laedpsvyuqfjfx Ac Uef Aluminum sliding table Equipped with the proven ball contact system Dust and dirt resistant due to minimal contact point between ball and trapezoidal rail 10-year Holzkraft warranty on wear of the guide rails Parallel fence with round bar guide With fine adjustment and quick lock Stable round bar guide made of precision-ground steel, 45 mm diameter Foldable as standard for cutting large workpieces Technical Data: Dimensions and Weights Net weight approx. 380 kg Extraction connection Suction port diameter 120 mm Saw blade guard suction port diameter 60 mm Machine body length 1388 mm Working area length 1000 mm Machine body width/depth 689 mm Working area width/depth 2000 mm Required space length 5118 mm Required space width/depth 3830 mm Electrical Data Connection voltage 400 V Drive motor power 5.0 kW Phase(s) 3 Ph Rated duty cycle S6 Current type AC Duty cycle 40 % Mains frequency 50 Hz Sliding table and table Sliding table length 2250 mm Table length 840 mm Sliding table width 270 mm Table width 560 mm Sliding table height 124 mm Table height 900 mm Circular saw unit Cutting width with parallel fence 900 mm Max. cutting height 90° 90 mm Max. crosscutting width to the left of blade 2310 mm Max. cutting height 45° 63 mm Edging length 2250 mm Saw blade diameter 315 mm Saw blade tilt 90 - 45° Saw blade speed 4000 rpm Item No. 5504323

Stanje: novo, Leto izdelave: 2024, moč: 1,2 kW (1,63 KM), SCHORR ELECTRIC HIGH-LIFT STACKER PRO 1500KG CAPACITY 5M LIFT HEIGHT RR15HH450E FREE LIFT Powerful professional-grade equipment with a lifting capacity of up to 1500 kg ✅ Reaches a lift height of 5m ✅ Free lift: mast only extends above the height of the lift frame – ideal for low ceiling heights ✅ Robust triplex mast & heavy-duty chassis ✅ Charger included ✅ Including powerful 24V 200Ah lead-acid batteries ✅ Digital battery charge indicator & hour meter ✅ Small turning radius of only 1575mm – ideal for narrow workspaces FEATURES / EQUIPMENT Robust and high-quality design Thanks to its sturdy and stable construction, the high-lift stacker ensures excellent stability and durability. With a lifting capacity of 1500kg, this stacker is a true powerhouse, offering the strength needed to effortlessly raise heavy loads up to 5 meters. Free lift function: Thanks to its free lift capability, this high-lift stacker is particularly well-suited for warehouses and areas with limited ceiling and entry heights. The triplex mast extends only above the lift frame height (1570mm), enabling safe and effective operation in confined spaces. Combined with a 5m lift height, it is a true all-rounder. Charger included: The built-in 24V lead-acid battery with a capacity of 200Ah ensures long operating times. To recharge the electric stacker, simply connect it to a standard 230V power outlet using the included charger. Easy handling: The stacker is easy to operate and features high-quality, waterproof controls, making it suitable for temporary use in damp or cool environments. All control instruments such as the battery charge indicator, emergency stop, and ignition key are centrally positioned for direct visibility by the operator. Thanks to its small turning radius of just 1575 mm, the electric high-lift stacker is exceptionally agile and versatile. Multiple drive modes: Thanks to its various drive programs, the SCHORR high-lift stacker is extremely flexible and can be perfectly adapted to user needs. In addition to the standard transport speed of approx. 5.8 km/h, it features a "creep mode" allowing slow and precise movements for maneuvering through narrow aisles and racking. Technical Specifications Manufacturer (short designation): SCHORR Manufacturer type code: RR15HHE Free Lift Lifting capacity: 1.5t Model: 500E Own weight including batteries: 1155kg Drive: Electric Tyres: Polyurethane Basic Dimensions Overall length: 1975mm Overall width: 820mm Length including fork back: 905mm Lift: 5000mm Free lift: 1740mm Mast height retracted: 2214mm Mast height extended: 5510mm Fork dimensions DIN ISO 2331: 60mm x 170mm x 1150mm Fork outside distance: 570mm Aisle width with pallet: 800x1200 lengthwise 2450mm Turning radius: 1575mm Speed Laedpfoqwdltsx Ac Usf Travel speed with/without load: 5.8km/h / 6.0km/h Lift speed with/without load: 0.09m/s / 0.16m/s Lowering speed with/without load: 0.15m/s / 0.16m/s Max. climbing ability with/without load: 6% / 15% Would you prefer to finance or lease the equipment? No problem! We also offer attractive options in this area. Just contact us and we’ll happy to advise you on the various possibilities. We look forward to your inquiry!

Stanje: kot nova (razstavni stroj), EX-DEMONSTRATION MACHINE For sale is an as-new HAGER HDE-59 BIG woodturning lathe with a centre distance of 1,000 mm. The exhibition machine is in original condition and therefore comes with the full warranty. Technical data - Motor: 2.2 kW / 3 HP / 400 V - Speed ranges: 100–450 rpm 300–1,100 rpm 750–2,700 rpm - Centre height: 250 mm - Centre distance: 1,000 mm - Tool rest: 350 mm - Rotation direction switch Lajdpfx Acjtpnddo Uef - Spindle M33 x 3.5 mm with ASR (Euro) safety groove - Spindle and tailstock taper: MK3 - Hollow spindle diameter: 20 mm - Main spindle: 4-fold bearing - Tailstock quill travel: 150 mm (with scale) - Total length: 1,780 mm - Weight: 235 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address in the contact form so that we can process your enquiry professionally. Thank you, your NEUREITER Team Related terms: woodturning machine, lathe, turning lathe, woodturning lathe, woodturning, turning tool, wood turning, lathes, machine, Hager Reference: R-A0117