Stroj za rezanje rob

Assfalg FS 5 - 45°

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 620 h, Funkcionalnost: popolnoma funkcionalen, Kaeser Aircenter SM13-11 Screw Compressor (2021) Manufacturer: Kaeser Model: Aircenter SM13-11 Nsdpjxnnd Rofx Ag Towc Year of manufacture: 2021 Condition: Very good, used Operating hours: 1,356 h Load hours: 606 h Next service at: 2,825 h Technical specifications Pressure: 11 bar Effective delivery rate: 1.08 m³/min Rated motor power: 7.5 kW Motor protection class: IP 54 Power supply: 400 V / 3 phase / 50 Hz Dimensions (W x D x H): 630 x 1200 x 1716 mm Weight: 400 kg Compressed air receiver: 270 l Compressed air connection: G 3/4 Sound pressure level: 64 dB(A) Refrigeration dryer Power consumption: 0.26 kW Pressure dew point: 3 °C Pressure drop: 0.2 bar Refrigerant: R 134a Energy-saving control: Yes Electronic condensate drain: Eco-Drain Electrical equipment EN 60204-1: Yes Scope of delivery: – Complete original documentation – RFID cards (2x) – 5 m power cable with 32A plug

Stanje: novo, Leto izdelave: 2025, Capacity: 2020 x 2 mm (ST37) Adjustment of the upper beam via hand levers on left and right Inclined segments in the upper beam Njdpfefifa Asx Ag Tswc Continuous bending and lower beam rail Paint finish RAL 7016 Manufactured in the EU Available immediately ex works Freight costs on request

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Simple to operate via integrated touchscreen. This machine is also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100 x 50 Number of cross-belt stations: 2 Nwsdpfx Agjd Ev Upj Tsc Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210

Stanje: rabljeno, Leto izdelave: 2003, NAKAMURA TOME SUPER NTJ CNC-STROJNO STRUŽENJE FABRIKAT: NAKAMURA TOME, JAPAN MODEL: SUPER NTJ GODINA PROIZVODNJE: 2003 UPRAVLJANJE: FANUC 18 iT B PREČNIK STEGE: 210,0 mm Nwjdpfx Asv I Tx Rog Toc MAKS. PREČNIK OBRTA: 200,0 mm RASTOJANJE IZMEĐU CENTARA: 780,0 mm PREČNIK POVLAČNE CEVI: 80,0 mm HODOVI: X OSA: 750,0 mm Z OSA: 130,0 mm REVOLVERSKA GLAVA: 2 x 12 POZICIJA BRZINA VRETENA: do 5.000 o/min PROLAZ VRETENA: 65,00 mm PRIRUBNICA VRETENA: A2-6 DODATNO: - CNC KRATKI MAGACINSKI ULAŽIVAČ ŠIPKI - REVOLVERSKI ALAT - TRANSPORTER STRUGOTINE - PRIRUČNICI

Leto izdelave: 2007, Stanje: zelo dobro (rabljeno), Inline blik-/pottenwasmachine & droger Volledig roestvrij staal Nodpfxsh Eazzj Ag Towc Voor containers tot maximaal 180 mm breed en 250 mm hoog Wordt geleverd in huidige staat of Getest en aangepast aan klantspecificaties

Stanje: kot nova (razstavni stroj), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 415 mm, stružna dolžina: 850 mm, premer struženja: 390 mm, izvrtina vretena: 105 mm, največja hitrost vretena: 2.000 obr/min, potovalna razdalja osi X: 225 mm, pomik po osi Z: 950 mm, hitro pomikanje X-os: 15 m/min, hitri pomik na osi Z: 15 m/min, skupna višina: 1.980 mm, skupna dolžina: 4.600 mm, skupna širina: 1.900 mm, premer tulec: 100 mm, poteza s peresom: 120 mm, skupna masa: 7.000 kg, prehod palice: 90 mm, zunanji premer vpenjalne glave: 300 mm, proizvajalec krmilnikov: Siemens, model krmilnika: 828D + Shopturn, Oprema: dokumentacija / priročnik, Maximum turning diameter: 390 mm Z-axis travel: 950 mm Maximum spindle speed: 2,000 rpm AC spindle motor SIEMENS (continuous/15 min): 25/33 kW Bar capacity: 90 mm Spindle nose: A2-11 Including accessories, among others: SAUTER 12-station turret VDI-40 Trifix mount for driven tools Nsdpfxsfk Et Ao Ag Tswc C-axis with spindle clamp and stabilization Wide and robust flat guides 45° slant bed for optimal chip removal Hinged belt chip conveyor with chip bin Kitagawa 3-jaw power chuck ø 300 mm Manual tool measurement swing-in Manually adjustable hydraulic tailstock with programmable quill Coolant system with high-performance pump (4 bar) Rittal filter fan on the control cabinet

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 650 mm, pomik po osi Z: 550 mm, največja hitrost vrtenja: 12.000 obr/min, skupna masa: 7.500 kg, For sale: CNC 5-axis machining center, brand DMG, model DMU 60 P The machine is fully functional and ready for immediate use. In 2021, a new spindle was installed and all maintenance work has been carried out. History: 2019: New ball screw (KGT) 2021: New spindle 2022: Single-shift operation 2023: Occasional job orders 2024: Taken out of operation but still connected to the power supply 12/2025: Disassembled, cleaned, and placed into storage Technical data: X-axis travel: 600 mm y-axis travel: 650 mm z-axis travel: 550 mm Control system: Heidenhain TNC 426 Spindle speed range: max. 12,000 rpm Spindle drive power: 15 kW Max. torque: 130 Nm Tool holder: SK 40 Table diameter: 630 mm Max. table load: 500 kg Number of tool stations: 60 positions Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 m/min Feed speed: 20 - 10,000 mm/min Total power requirement: 44 kVA Space requirement approx.: 7.0 x 6.0 x 2.7 m Machine weight approx.: 7.5 t No chucks or vices are included in the offer. Transport and loading can be organized throughout Europe upon request and for an additional charge. Nedpswbhq Hsfx Ag Tswc Prices are quoted plus VAT. Viewing by appointment is possible. Contact us—our team will be pleased to assist you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you planning to sell your machine? For further information or to contact us, please visit our website.

Stanje: novo, Leto izdelave: 2024, This is a dual-productive CNC laser machine. There’s no magic—just two laser heads. It features a continuous table, allowing you to cut materials and fabric rolls of any length. This model also comes equipped with a waste collection bin, significantly improving workplace comfort. Both laser heads operate simultaneously, maintaining a minimum distance of 130 mm from each other. Each head has its own 100–120 W laser tube, enabling rapid processing. The Wattsan 1610 works with wood, plywood, cardboard, paper, Plexiglas, acrylic, plastic, rubber, leather, stone, and more. Call our managers for further details! Wattsan 1610 Duos ST Specifications: - Working area: 1600 x 1000 mm - Laser power: 100–130 W - Table lowering depth: 40 mm - Positioning accuracy: 0.03 mm - Machine dimensions: 1600 x 2200 x 670 mm (+ 315 mm on casters) - Packaging dimensions: 2300 x 1750 x 810 mm - Weight: 457 kg Virmer not only provides first-class machines, but also offers service and delivery. Our engineers and managers are ready to answer all your questions and can provide video assistance if required. Additionally, owners of Wattsan equipment receive lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. As the official supplier of Wattsan, we deliver not only laser engravers, but also metal cutters, welding machines, marking units, and cleaning equipment. Wattsan is a Chinese manufacturer with almost 15 years of experience producing laser equipment, continuously advancing with the help of customer feedback. As a result, Wattsan has implemented over 50 upgrades, making its machines more reliable, precise, and powerful—helping you to take your business to the next level. CONTACT US BY PHONE OR EMAIL! WE WILL HELP YOU SELECT THE RIGHT MACHINE FOR YOUR APPLICATION. If you are searching for the right laser or CNC milling machine, we are happy to advise you. Discover our extensive range of laser machines and accessories: - CO2 laser machines - Metal laser cutting machines - Laser metal cutters - Fiber metal lasers - Fiber laser engraving machines - CNC milling machines for metal - Wood milling machines - CNC routers - Laser engraving machines Nwsderzrg Depfx Ag Toc - Laser engravers - Laser cutting machines for plywood - Laser engravers - Laser cutting machines for metal - CNC milling machines - Laser marking units - Lenses - Chillers - Machine cooling systems - S&A chillers - IPG, MAX Photonics, Raycus lasers - Compressors - Rotary attachments - Mirrors for laser machines.

Stanje: rabljeno, Leto izdelave: 1966, max. pulling force 5 t, max. stroke 850 mm, max. cutting speed 12 m/min, max. return speed 25 m/min, clamping area 410 x 575 mm, groove width 3 - 90 mm, bore diameter 13 - 500 mm, workpiece weight: 6,000 kg, depth of machine base below floor level 1,400 mm Nwodpfx Agscm Elnj Tjc

Stanje: rabljeno, Clamping plate, scribing/marking plate, inspection plate, measuring table, welding table, aligning plate - Clamping plate is from a coordinate measuring machine - Width: 1335 mm - Length: 3000 mm - Height: 250 mm - Plate thickness: 40 mm Nsdpfx Asfc T Tqsg Towc - Plate features: with support ribs - With 4x leveling feet - Quantity: 1 piece available - Transport dimensions: 3000 x 1335 x H750 mm - Weight: 2,749 kg