Broširni stroj

Arthur Klink

Stanje: rabljeno, Leto izdelave: 2023, številka stroja/vozila: 03.2862, skupna masa: 15.000 kg, ARTHUR KLINK RISH-M10X1250X400 rezkalni stroj z avtomatizacijo Podatki o stroju • 10 → kategorija vlečne sile ≈ 10 t (≈100 kN) • 1250 → maksimalni dolžina rezkanja ≈ 1250 mm • 400 → delovna površina/miza ≈ 400 mm širina • Leto izdelave: 2023 Gsdpfezgfxijx Adkska • Prebrane delovne ure: 76 • Krmilni sistem: ARTHUR KLINK • Lastna teža: pribl. 14.000 kg • Priključne vrednosti: 400 V / 50 Hz / 24 VBC / 50 kVA Avtomatizacija / periferija • Transporter za ostružke, NEUHÄUSER, tip 2126-2, leto izdelave 2022, serijska št. 308904/01 • Hidravlični rezervoar, HBE, leto izdelave 2023, prostornina pribl. 1.200 l, serijska št. A22-08417 • Robotski manipulator, YASKAWA, tip YR-1-06VXH12-A00, leto izdelave 2021, lastna teža pribl. 150 kg, maksimalna nosilnost pribl. 12 kg, serijska št. SV2112022790001 • Robotsko krmilje, YASKAWA, tip ERAS-1000-06VXH25-E10, leto izdelave 2022, lastna teža pribl. 70 kg • Dvojna postaja za vlaganje in jemanje, METEC / EGS AUTOMATION, tip SUMOEKOPLEX MSM-AUTOMATION KLINK, leto izdelave 2023, serijska št. 220452-4 • Verižni transporter, EKS AUTOMATION, tip Räummaschine 03.2862, leto izdelave 2023, lastna teža pribl. 300 kg, mere (Š x V x G) pribl. 2.450 x 2.100 x 1.600 mm Opomba Omarico z električno opremo je potrebno preveriti, saj so bili posamezni elementi demontirani. Oglejte si zadnjo sliko.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, proizvajalec krmilnikov: SIEMENS, model krmilnika: n/a, skupna masa: 7.000 kg, This 3-axis LORENZ LS 150 was manufactured in 2015. It offers a connected load of 60 kVA, a rated current of 50 A, and operates on a 400V system. Weighing 7,000 kg, this machine has been upgraded to enhance performance. If you are looking for a high-quality milling machine, consider the LORENZ LS 150 we are offering for sale. Please contact us for further information. Additional equipment: • Rollers, single gear components, spiral feed Machine advantages Technical advantages: • Operating voltage: 400 V • Connected load: 60 kVA • Rated current: 50 A • Frequency: 50 Hz • Main fuse: 63 A • Retrofit: In 2015, a CNC retrofit was performed, featuring a Sinumerik 840D control system. • All mechanical components have been checked, all hydraulic components inspected, and hoses replaced. • All necessary components have been installed to ensure smooth production processes. Additional information: Machine is still under power // All necessary components have been installed to ensure smooth production. Gsdpfox D Iyqex Adkeka

Stanje: rabljeno, Artrhur Klink RSH1 - 1250 brusilni stroj za broške 09.2009, nov 1979, miza 200 x 1800, elektromagnet 200 x 600, z ustreznim orodjem/dodatki, brez omare. Gkodpfx Aezc Iq Iedkoa

Leto izdelave: 1984, stanje: rabljeno, številka stroja/vozila: 16700, Color: white With magnetic panel feed, automatic feeding system, Gedpebrclqefx Adkoka Tensile force: 10 tons Stroke: 1200 mm Weight: 6 tons Footprint: approx. 160 x 140 cm

Leto izdelave: 1994, stanje: zelo dobro (rabljeno), številka stroja/vozila: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of manufacture: fully refurbished by the manufacturer in 1994 Weight: 3,700 kg Gkodpfxegyd T Eo Adkja Tensile force: 10,000 kg (100 kN) Max. stroke: 1,500 mm Max. workpiece diameter: Ø 500 mm Broaching speeds: steplessly adjustable from 1 m/min up to 6 m/min Return speed: steplessly adjustable up to 20 m/min Power supply: 400V / 50Hz

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Year of manufacture: approx. 1960 Type: Horizontal Broaching Machine Model: RH 10-50 Machine no.: 241 Weight: 3,700 kg General / Technical Data: Used horizontal hydraulic internal broaching machine in age-appropriate good condition, with heavy-duty manual tool feeder. Broaching stroke: 1,500 mm Tensile force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Clamping surface (workpiece area): Ø 460 mm Max. workpiece diameter: approx. 750 mm (limited by the tool feeder tray) Cutting speed: hydraulically stepless adjustable from 1.0 m/min to 7 m/min Return speed: hydraulically stepless adjustable from 5 m/min to 30 m/min Required installation space (W x D x H): approx. 6500 mm x 950 mm x 1,400 mm (without working area) Power supply: 380 Volt, 50 Hz Connected load: 8 kW Features: • Mechanical-hydraulic control for broach & return stroke • Integrated coolant/lubricant system Gkodpfsr A Hdgsx Adksa • Manually operated tool feeder • Broaching slide with puller head mount, guided on both sides with flat guides • Adjustable tensile force limiter Accessories: • 1 universal puller head for flat shanks, 3 mm to max. 25 mm wide • Adapter sleeve for drawbridge from Ø 85 mm to Ø 63 mm Remarks: The machine is suitable for keyway production with flat broaching tools as well as for profile broaching. Due to the machine bed and the robust tool feeder, the machine is well-suited for heavy-duty profile broaching tools. The machine is used and in very good condition for its age. The machine is held in stock and can be inspected under power. The machine has not been refurbished, neither technically nor visually, but is ready for immediate use. Profile broaching heads are largely available used upon request, depending on DIN standard, dimensions, and stock availability. Direct contact details and further information can be found in the attached PDF document.

Leto izdelave: 1985, stanje: dober (rabljeno), številka stroja/vozila: 04.2187, Hydraulic Internal Broaching Machine in Good Working Condition Manufacturer: Arthur Klink Year of Manufacture: 1985, refurbished Weight: 2 t Gkjdpfx Adeixntwokja Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Tensile Force: 10,000 kg at 3 m/min Broaching Speeds: hydraulically variable from 1 m/min to 7 m/min Return Speed: hydraulically variable from 7 m/min to 30 m/min Maximum Stroke: 1200 mm Broaching Tool Clamping: universal pull head for flat shanks up to 26 mm width Maximum Workpiece Diameter: Ø max. 480 mm (limited by oil and chip tray) Table Bore: Ø 70 mm Power Supply: 380 Volt / 50 Hz / 5 kW

Leto izdelave: 1980, stanje: dober (rabljeno), številka stroja/vozila: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine No.: 03.2123 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition Pulling force: 25,000 kg Broaching length: 2000 mm Broaching stations: 3 units Distance between broaching stations: 160 mm Clamping head holder diameter: 3 x Ø 100 mm Passage width between cylinders (nominal): 500 mm Passage width between cylinders (measured): max. 590 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 3400 mm x 3400 mm x 6900 mm (without pit) Power supply / connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Equipment: Gksdpfx Adjdffzfekja The machine is currently supplied without a workpiece table. A sliding workpiece table with a special external broaching clamping device was previously mounted on the machine (workpiece sliding table is adaptable). The tool clamping system is equipped with hydraulic locking in both the pull bridge and the feed unit. The machine features a coolant system with integrated chip conveyor. Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in series production, and for optimal performance, installation on a dedicated foundation (pit) is ideally required. Pulling heads and ejectors are available on request. The machine can be viewed in our warehouse.

Leto izdelave: 1990, stanje: zelo dobro (rabljeno), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical Specifications: Gkedpfxelpadyo Adkea Vertical internal broaching machine in very good technical condition Pulling force: 16,000 kg Broaching speed: up to 27.5 m/min, infinitely variable Return speed: up to 34 m/min, infinitely variable Maximum stroke: 1,250 mm Broaching stations: 4 units Equipment: - Automatic tool changer - Automatic parts feed (part-specific) - Hydraulic tool clamping device (part-specific) Note: High-performance production broaching machine for large-scale series production with high cutting speed!

Leto izdelave: 1971, stanje: zelo dobro (rabljeno), Horizontal Internal Broaching Machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Model: RIW 16 x 1800 Gkedjhpqquepfx Adkea Year of manufacture: 1971 Max. pulling force: 16 t Max. stroke: 1800 mm Max. cutting speed: 7 m/min Max. return speed: 25 m/min Max. tool diameter: Ø 95 mm Weight: 4.8 t

Leto izdelave: 1983, stanje: zelo dobro (rabljeno), številka stroja/vozila: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of Manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Gjded Nb A Nepfx Adkjka Distance between broaching stations: 125 mm Draw head mounting diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely adjustable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely adjustable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit bottom) Power supply / connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated draw heads according to DIN 1417/18 for locking the broaching tools in the draw bridge. The needle ejector heads in the tool feeder are hydraulically locked. The machine is fitted with a coolant system with an integrated magnetic tape chip conveyor for pit installation. Remarks: The machine is in very good condition and still has its original paint. It is designed for use in series production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle ejectors are available on request. The machine can be inspected at our warehouse.