Razvijalna linija

ARKU RM 3025.4/9

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 001669, Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Codpfxohigmbs Afnogp Decoiler with auxiliary drive and brake Fixed coil loading saddle + decoiler traversing device Included: High-Performance Precision Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine No.: 001669 Maximum pass-through width: 620 mm Number of straightening rolls: 9 Straightening roll diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rolls are multi-point supported against deflection All rolls driven via distribution gearbox and cardan shafts. Used, as-is ex stock, immediately available. Overhaul available on request. Delivery time by arrangement. Further data available shortly or on request.

Stanje: novo, Leto izdelave: 2023, Vysoce přesné rovnání – Leveler Bosporas vyrábí průběžné a kusové rovnací stroje. K dispozici jsou modely 4H, 6H a vláknové rovnací stroje. Csdpfxoh Dzg Uo Afnjgp Abychom vám mohli připravit cenovou nabídku, sdělte nám prosím typ materiálu, tloušťku a šířku.

Stanje: rabljeno, Leto izdelave: 2009, Pressure: 40 t Stroke: 4 - 100 mm Strokes per minute: 130 Throat depth: 230 mm Installation height: 475 mm Table size: 650 x 460 mm Table opening: 205 x 165 mm Table height above floor: 710 - 950 mm Table adjustment: 240 mm Ram area: 435 x 240 mm Ram adjustment: 85 mm Drive power: 5.0 kW Weight: 2.6 t Required space approx.: 1.2 x 1.7 x 2.3 m Approved for manual loading according to CE standards With motor, hydraulic clutch/brake combination, mechanical overload protection in the ram, manual stroke adjustment, manual ram adjustment, motorized central lubrication, adjustable table, two-hand and foot operation Cgodpjvzxpnefx Afnep

Stanje: zelo dobro (rabljeno), 13 straightening rolls, Ø 150 mm Strip width: 600 – 2,000 mm Strip thickness: 6 – 15 mm Design: 4-Hi cassette Cgsdpov S Ad Djfx Afnop

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: D20E/8022, Ponudbena številka: D20E/8022 Vrsta stroja: Večkolska vlečna naprava - suha Informacije: Ravni izvlek Proizvajalec: VEB Tip: 8 blokov Leto izdelave: Vhodni premer: 2,5 mm Končni premer: 0,8 mm Število vlečenj: 8 Premer koluta: 400 mm Hitrost - metri/sekunda: 15 m Lokacija: V Evropi Cgsdpfx Aewi Tidsfnjp

Stanje: pripravljen za uporabo (rabljen), (Prvotna znamka je Georg Fischer, prevzeta s strani Hämmerle AG) Kompaktni stroj švicarske izdelave z avtomatskim sistemom za izravnavo tlaka za ravnanje in sprostitev napetosti v delih. Uporaba: fino preluknjani deli - lamele sklopke - zavorni diski - žagine plošče - letalski deli - deli izrezani z laserjem in plazmo - ravnanje delov pred robotskim varjenjem/brušenjem. - preprečuje ukrivljanje z 19 povratnimi valji - 11 proti-valjev v spodnjem položaju - 10 proti-valjev v zgornjem položaju - zgornji in spodnji valji imajo hidravlični motorni pogon Csdsv Rwcrjpfx Afnegp - varnostni ventili proti preobremenitvi ščitijo vrata stroja pred poškodbami, preobremenitvijo ali napačno nastavitvijo - hitro nastavljanje, zahteva vnos 3 parametrov (vhodna reža - izhodna reža - hitrost podajanja) - hitrost stroja: 2-20 m/min maksimalna širina: 750 mm maksimalna debelina: 12 mm minimalna dolžina dela: 100 mm moč: 31kW g skupna teža: 10 ton

Stanje: rabljeno, Leto izdelave: 1984, Material width: 350 mm Coil weight: 1 t Material thickness: 0.5 - 6 mm Coil inner diameter: 380 - 540 mm Coil outer diameter: 1500 mm Number of straightening rollers: 9 Straightening roller diameter: 30 mm Number of feed rollers: 2 Straightening machine weight: 2 t Csdpst Hmk Tefx Afnegp Space requirement for straightening machine (W x D x H): 2.0 x 2.0 x 1.9 m Decoiler weight: 1.3 t Space requirement for decoiler (W x D x H): 1.7 x 1.5 x 1.6 m

Stanje: rabljeno, Coil Processing Line – Decoiler and Straightening Machine Year of Manufacture: 1991 Strip Width: 50 to 450 mm Sheet Thickness with Straightener Disengaged: 6 mm Sheet Thickness with Straightener Engaged: 2 mm - Excellent equipment and feeding aids Required floor space (L x W): approx. 7,000 x 3,000 mm Total weight: approx. 11 tons Condition: Good Straightening Machine, HMS Type RS 47-04/1, Serial No. Strip Width, Nominal: 400 mm Strip Width, Max. Passage Width: max. 455 mm Strip Thickness at 400 mm width (steel): max. 1.5 mm Strip Thickness at 400 mm width (copper): max. 2 mm Speed: max. 40 m/min Number of Straightening Rolls: 7 pcs Straightening Roll Diameter: Ø 40 mm Number of Feed Rolls: 2 pcs Feed Roll Diameter: Ø 80 mm Infeed/Throughput Height: 1,500 mm - Straightening rolls hardened, ground, and hard-chromed, supported centrally - Feed rolls hardened, ground, and hard-chromed, with hydraulic lift - Manual straightening roll adjustment - Infeed aid with hydraulically extendable tongue and hydraulically adjustable guide roller - Adjustable side strip guides - All straightening rolls driven via distributor gearbox and cardan shafts - Both feed rolls driven via gearbox and cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or processing thicker material, stroke movement by trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3,600 x 2,200 x 2,200 mm Net weight: approx. 4 tons Decoiler, HMS Type BA 1.5-06/80, Serial No. Coil Weight: max. 8,000 kg Outside Coil Diameter: max. 1,600 mm (with loading saddle) Outside Coil Diameter: max. 2,000 mm (without loading saddle) Coil Flange Diameter: Ø 1,700 mm Inside Coil Diameter, Expansion Range: 460–520 mm Coil Width, Nominal: max. 630 mm Expansion Jaw Width: 750 mm Height of decoiler head above base plate: 1,500 mm - Decoiler head driven by hydraulic motor and gear - Pneumatic overrun brake on decoiler head TWINFLEX - Hydraulic expansion of decoiler head via central wedge slider system - Hydraulic hold-down arm with double pendulum roller, hydraulically driven - Coil loading saddle with 12 t lifting capacity and 300 mm stroke - Decoiler on overfloor travel frame with motorized cross travel Transport dimensions (L x W x H): 3,500 x 1,900 x 2,500 mm Net weight: approx. 5 tons Central hydraulic unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1,600 x 850 x 1,450 mm Net weight: approx. 800 kg Electrical control cabinet (adjacent) Cgjdpfx Aoif Sg Sjfnop - All cable connections via Harting connectors Transport dimensions (L x W x H): 2,800 x 500 x 2,250 mm Net weight: approx. 800 kg

Stanje: novo, Leto izdelave: 2024, - Capacity 1070 x 3 mm - Electrically adjustable rear roller - Digital display - Hardened rollers - Conical rolling - Brake motor Cjdpegg Rbpsfx Afnjgp - Foot switch - Emergency stop - Documentation - 400V

Stanje: rabljeno, Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 000326, število ravnalnih valjev: 7, teža tuljave: 7.500 kg, zunanji premer tuljave: 1.800 mm, notranji premer tuljave: 508 mm, višina izdelka (maks.): 5 mm, število podajalnih valjev: 2, premer ravnalnega valja: 50 mm, najv. debelina jeklene pločevine: 5 mm, širina tuljave: 800 mm, Lg 35024 Linear Strip Processing Line Cgodpfxetrlzao Afnsp LORENZ BRM 50/820.7-HH7500.1 Maximum coil weight: 7,500 kg Maximum strip width: 800 mm Material thickness: 0.8 to 5 mm (steel with yield strength approx. 300-350 N/mm²) Number of straightening rollers: 7 Further data and a detailed quotation available on request.