270 - 90 - 350

ARBURG

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, vpenjalna sila: 1.000 kN, Arburg 420C-1000-60-150 (123) 2-component with robot and safety cage Year of manufacture: 2004 TECHNICAL DATA Screw diameter [mm]: 18/30 Shot weight [g]: 17/65 Injection pressure [bar]: 2500/2210 Clamping force [kN]: 1000 Tie bar distance [mm]: 420x420 Platen dimensions [mm]: 570x570 Minimum mould height [mm]: 250 CONTROLS Control system: Selogica Monitor: Yes Control cabinet: Yes Language: German OTHER Klodpfx Asvt Rwujl Nsr Power [kW]: 34.5 Operating hours [h]: 61,792 Dimensions [m]: 4.6 x 1.8 Weight [kg]: 4000 CR – Core pull R – Handling or robot ZP – Air valve Without hopper

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Enota za zapiranje: 50 ton Odpiralni hod (maks. kN/mm): 30 / 250 Višina orodja (fiksno/spremenljivo) min.-maks. mm: ---/172/272 Razdalja med ploščama (fiksno/spremenljivo) maks. mm: ---/422-522 Hod menjalne mize: 650 mm Premer polža: 20 mm Volumen vbrizga: 31 cm3 Teža vbrizga: 29 g Tlak vbrizga: 2500 bar Obratovalne ure: 19.718 h Klodpex H Nu Rjfx Al Nor

Stanje: rabljeno, Leto izdelave: 2001, obratovalne ure: 38.850 h, vpenjalna sila: 25 kN, delovna prostornina: 20 cm³, tlak vbrizgavanja: 2.500 letvica, skupna masa: 1.800 kg, premer polžastega transporterja: 18 mm, Dobavni pogoji: iz lokacije Ksdpeyt R S Asfx Al Njlr Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Arburg 820S 4000-2100/400 / Production Line with Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection Unit: Screw diameter: 60 mm Shot weight: 723 g Injection pressure: 2500 bar Dosage volume: 792 ccm Clamping Unit: Clamping force: 400 t Tie bar distance: 820x820 mm Platen size: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional Equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic core pull, needle type, proportional valve controlled x 4 pairs Hot runner control x 24 Reinforced injection units – bimetallic Proportional valve on vertical injection unit – precise injection Machine with six cylinders / batteries with compressed nitrogen (extra charge for fast operation) Parallel movements Automatic mold height adjustment Screw diameter in vertical injection unit: ⌀40 mm - 184 g/PS Built-in pressure monitoring system by Sensor Kistler – mold pressure measurement Original Weber rotary table: highly precise, electrically driven by a servo motor controlled via frequency inverter Rotary table diameter: 1200 mm Rotary table available at additional cost Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes driven by electric servo motors: X, Y, Z (telescopic) Travel strokes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel Robot safety package Robot with adapter and protective housing Robot available at additional cost Dimensions: Weight: 21,000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started up by our service technicians before sale. Ksdpfx Ajy Dq Awol Njlr It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Arburg 1500T 3200-1300 e² / Hybrid Machine with Rotary Table Year of Manufacture: 2011 Injection Unit: Screw Diameter: 60 mm Shot Weight: 607 g Injection Pressure: 2,000 bar Dosage Volume: 664 ccm Clamping Unit: Clamping Force: 320 t Tie Bar Distance: 0x0 mm Platen Size: 1,510 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: SELOGICA – Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-efficient, and very quiet Operating Hours: approx. 30,000 in automatic mode Euromap 67 Robot interface Controller with air valve Hydraulic core pull x 3 Hot runner control x 13 Kodpfxjy Dq Aqo Al Njlr Injection unit hardened – bimetallic Main machine motor – servo motor driven by inverter Highly precise rotary table, driven by servo motor and controlled by inverter Rotary table diameter: 1,500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor – mold pressure control Conversion of the injection unit for vertical operation is possible Dimensions: Weight: 16,080 kg Length/Width/Height: 4.91x2.12x4.62 m All machines offered are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine, or to participate in a live technical test at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection Unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping Unit: Clamping force: 250 t Tie bar distance: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface Kjdpjy Dq Adjfx Al Njlr Air valve x 4 Hydraulic core pull x 2 Hot runner control x 15 Injection unit hardened – bimetal Machine equipped with cylinder / battery with compressed nitrogen (additional charge for high-speed operation) ECO – the machine features a system for setting the minimum mould height Robot – Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes are driven by servo motors (electric); C axis – pneumatic Axis stroke: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 12,510 kg Length/Width/Height: 6.57x1.76x2.46 m All offered machines are started up by our service engineers prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Arburg 570S 2200-290/100/100 / Production Line with Wittmann W823 Robot / Operating hours: 20,499 h in automatic mode Year of manufacture: 2016 Injection Unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2,000 bar Dosage volume: 144 cm³ Clamping Unit: Clamping force: 220 t Tie bar spacing: 570 x 570 mm Platen size: 795 x 795 mm Ejector: hydraulic Clamping system: hydraulic Control system: SELOGICA - touchscreen Additional Equipment: 3-component high-speed injection moulding machine Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface 6x air valves 4x hydraulic core pulls with proportional valve control Hot runner control Hardened injection unit - bimetallic Proportional valve on the injection unit – precise dosing Machine with two cylinders / battery with compressed nitrogen (extra capacity for fast operation) Machine is designed for operation with an electric rotary table. The machine is equipped with an inverter for servo motor control on the rotary table and an interface for rotary table connection Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/PS Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/PS Wittmann W823 robot Year of manufacture: 2015 5-axis robot: 3 axes powered by servo motors (electric); Axis C and A movement Axis travel: X-550, Y-1400 (telescopic), Z-3500 Touch panel control Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor at extra cost Dimensions: Weight: 10,830 kg Length/Width/Height: 5.53 x 1.77 x 3.29 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of technical tests of the selected machine, or participate in live technical demonstrations at our facility in Łódź. Price: on request Kjdpfsy Dqz Tsx Al Nslr

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Arburg 570H 2000-800 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of manufacture: 2011 Injection unit: Screw diameter: 50 mm Shot weight: 359 g Injection pressure: 2000 bar Dosage volume: 392 ccm Clamping unit: Clamping force: 200 t Tie bar distance: 570x570 mm Platen dimensions: 795x795 mm Ejector: electric Clamping system: toggle lever Control: SELOGICA - touchscreen Klodpsy Dqz Hsfx Al Nor Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 2 Hot runner control x 12 Injection unit hardened - bimetal Main motor of the machine - servo motor with inverter drive - energy-saving Injection unit is powered by servo motor, controlled by inverter Machine with cylinder / battery with compressed nitrogen (for rapid operation) Central lubrication Parallel movements Arburg Multilift Select 6kg transverse Robot Year of manufacture: 03.2011 4-axis robot: 3 axes driven by servo motors (electric); C-axis pneumatic Travel paths in axes: X-400, Y-800, Z-1400 Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt possible at additional cost Dimensions: Weight: 8700 kg Length/Width/Height: 5.58x1.71x2.21 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: Upon request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Arburg 570C 2000-350/150 / Production Line with Side-entry Arburg Multilift Robot / 2K-Machine Year of Manufacture: 2003 Injection Unit: Screw Diameter: 40 mm Shot Weight: 153 g Injection Pressure: 2120 bar Dosage Volume: 182 ccm Clamping Unit: Clamping Force: 200 t Tie Bar Distance: 570x570 mm Platen Size: 795x795 mm Ejector: hydraulic Clamping Unit: hydraulic Klodjy Dqztjpfx Al Nor Control System: SELOGICA Additional Equipment: Production line with side-entry Arburg Multilift robot 2K machine / two-component Air valve x 1 Hydraulic core pull x 5 Hot runner control Reinforced injection units – bimetallic Proportional valves on injection units – precise molding Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS All offered machines are started up and tested by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of manufacture: 09.2011 Injection unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2000 bar Dosage volume: 144 ccm Clamping unit: Clamping force: 160 t Tie bar spacing: 520x520 mm Platen size: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic core pull, controlled by proportional valve x 2 Reinforced injection units – bimetallic Proportional valves on injection units - precision moulding Machine with two cylinders/batteries with compressed nitrogen (additional charge for rapid operation) Parallel movements Screw diameter in vertical injection unit: ⌀25 mm - 45 g/PS Original rotary table Purchase of rotary table at extra cost Wittmann W823 robot Year of manufacture: 2015 5-axis robot: 3 axes driven by servo motors (electric); C-axis and A motion Travel on axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel Kodpfx Aoy Dqzmol Nelr Robot safety package Robot with adapter, protective housing Purchase of robot at an additional cost Dimensions: Weight: 6720 kg Length/Width/Height: 4.41x1.84x3.20 m All machines offered are started and checked by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request