Stroj za brizganje

ARBURG Allrounder 370S-500-100

Stanje: dober (rabljeno), Leto izdelave: 2015, Thermocontainer used; however, in exceptionally good condition, ready for immediate use. Model: C-780ü Bjdped Syg Sefx Aiqodh (Various thermocontainers in stock, capacities from 580 to 1170 liters, see additional photos) Technical Data: Internal dimensions: 610 x 810 x 1570 mm External dimensions: 735 x 955 x 1900 mm Weight: approx. 98 kg Capacity: approx. 780 liters With slide-in rails for grids Features: Central door locking 2 side pull handles 1 folding handle recessed in the door Running gear with 108 mm PA wheels, suitable for cold storage Door retainer Inner tray with insertion rails Corner supports with bend protection PE panels (2 mm thick), light blue Profiled protective plates (3-sided) 2 fixed wheels, 2 swivel wheels Lockable with padlock Load capacity up to approx. 400 kg OVERHAULED Final cleaning to be carried out by the buyer Offer consists of one container Color selection subject to stock availability Approx. 100 units in stock Viewing is possible Tuesdays and Thursdays between 9:00 and 16:00 by prior telephone appointment. The item can be taken immediately if required. Unless explicitly stated otherwise, this offer is for used goods. Items have been visually inspected and are technically sound as far as can be determined. Shelves and cooling plates are not included. These are available from us upon request. For time reasons, we can only respond to this item if you provide a telephone number with your inquiry. Price stated is net per unit, plus the currently applicable VAT. All offers ex stock 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. (Photos are for reference only, as we cannot display every single item)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Zapiralna sila: 25 ton Bdjdpfxovl Skgj Aiqjh Razdalja med stebri: 270x270 mm Največja odprtina: 275 mm Višina orodja: 200 mm Velikost orodne plošče: 400 x 400 mm Premer polža: 18 mm Volumen vbrizga: 20 cm3 Masa brizga: 17 g Tlak vbrizga: 2500 bar Delovne ure: 38.035 h

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. No.: 18643 Manufacturer: ARBURG Model: 470 C 1500-400 Golden Edition Year of manufacture: 2008 Clamping Unit Clamping force: 150 t Opening stroke: 500 mm Tie bar spacing (h x v): 470 x 470 mm Min. mold height: 250 mm Daylight opening: 750 mm Injection Unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight (PS): 141 g Injection pressure: 2,500 bar Bdsdpfxexvy Rlj Aiqeh Dimensions & Weight Dimensions (LxWxH): 4.6 x 1.6 x 2.1 m Machine weight: 4,850 kg Additional Information & Extras Core pull: 1 unit Additional Information: Communication card for ProSeS interface available (OPC-UA) Robot interface available (EUROMAP 67) The Golden Edition is a special version of the proven ALLROUNDER C-series, distinguished by optimized hydraulic performance, stable process control, and high reliability. The machine features a clamping force of 150 tons and is ideally suited for the production of technical plastic components as well as for applications with high quality requirements. Typical advantages of this series include: * Robust and durable design * High process stability and repeat accuracy * Reliable ARBURG control system * Good availability of spare parts * Suitable for continuous industrial operation The Golden Edition additionally stands out due to its optimized performance and excellent price-performance ratio in the used machinery market. Thanks to its versatility, this machine is often used in sectors such as automotive supply, technical plastic parts, and series production.

Stanje: novo, MOŽNOST NAKUPA ALI NAJEMA Bdsdpsru E Svsfx Aiqeh Prosimo, da preberete vse tehnične podatke. Če je ta stroj primeren za vas kot investicija, vas prosimo, da za pripravo ponudbe posredujete popolne kontaktne podatke z veljavno telefonsko številko in e-poštnim naslovom. Vlakenasti laser 30 W Površina za označevanje: 200 x 200 mm Maksimalna velikost obdelovanca: Š x V x G: 550 x 450 x 350 mm Vrsta laserja: Vlakenasti, 30 vatov Valovna dolžina: 1064 mm Maksimalna hitrost označevanja: 7000 mm/s Motorizirana os Z, višina: 700 mm Natančnost ponavljanja/leča: +/- 0,001 mm Minimalna širina črte: pribl. 0,01 mm Napajanje: 240 V/50 Hz Zunanje mere: 110 x 80 x 200 cm Sprednja vrata: ročna Vključno s programsko opremo in računalnikom Možnost ogleda stroja na kraju samem, priključenega na električno omrežje. Cena neto, brez DDV.

Stanje: dober (rabljeno), Sturdy crane system, ideal for glass storage or workshops, Load capacity: 3 t, Length: 14,250 mm, Width: 8,500 mm, Height: 3,650 mm Maximum hook height: 3,280 mm, Bjdpforyv S Asx Aiqodh Maximum overall height: 3,950 mm.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036936, vpenjalna sila: 800 kN, premer vijaka: 35 mm, delovna prostornina: 135 cm³, tlak vbrizgavanja: 1.837 letvica, injekcijska masa: 123 g, minimalna višina orodja: 150 mm, izmetalna sila: 22.000 N, hod izmetalca: 100 mm, odmični hod: 750 mm, vgradna višina: 400 mm, skupna dolžina: 4.750 mm, skupna širina: 1.670 mm, skupna višina: 1.820 mm, skupna masa: 5.900 kg, ogrevalna zmogljivost: 8,9 kW (12,10 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 470 mm, teža orodja: 600.000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for all-electric injection moulding, enabling rapid and innovative responses to market requirements. It combines high performance, user-friendly operation, and short delivery times. The machine can be used across various application areas, such as the packaging industry, electrical and electronics industry, medical technology, and the automotive sector. Your benefits: – Optimised price-performance ratio for a wide range of applications – High energy efficiency thanks to the all-electric machine concept – Fast delivery times realised through basic machine concept with a broad spectrum of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.:61036936, new, Year 2023) CONTROL SYSTEM • MC P1 with 15" TFT colour display and multi-touch function CLAMPING UNIT • Clamping force kN 800 • Maximum mould opening force kN 120 Bedpeuggb Defx Aiqodh • Daylight (h x v) mm 470 x 420 • Mounting platens (h x v) mm 610 x 560 • Minimum - maximum mould height mm 150 - 400 • Maximum opening stroke mm 750 • Maximum mould opening travel mm 350 • Ejector drive electric • Ejector stroke mm 100 • Ejector force forward/back kN 22 / 22 • Ejector speed forward/back mm/s 300 / 300 • Maximum mould weight kg 600 INJECTION UNIT • Screw diameter / type mm 35 / standard • Effective L/D ratio 20.0 • Injection pressure bar 1837 • Stroke volume cm³ 135 • Shot weight at max. stroke (PS) g 123 • Injection speed mm/s 200 • Injection flow rate cm³/s 192 • Screw drive / speed 1/min 382 • Plastification rate (standard screw) g/s 19.5 • Nozzle contact force kN 30 ELECTRICAL PARAMETERS • Connected load kW 17.8 • Installed heating capacity kW 8.9 • Power supply V / Hz 400 / 50, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet t 5.9 • Length x Width x Height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT • Wear-resistant plastification • BluePower full insulation of plastification cylinder • Open nozzle • Air valve, single (BWAP) • Pneumatic control for hot runner shut-off, single • Electrical interface (cascade), 4-fold • Electrical preparation for hydraulic auxiliary unit • Euromap interface for handling, E18, E63 • Euromap interface (central computer), E67, E77 • Water manifold, 4-fold • Automatic central lubrication • Adaptive Process Control (APC) • Injection-compression moulding function • Graphics analysis package • Swivelling device for injection unit The machine is located at our factory in Parsdorf and is available at short notice. Additional optional features can be offered on request. We look forward to your enquiry.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 300 h, vpenjalna sila: 400 kN, skupna masa: 2.180 kg, proizvajalec krmilnikov: ARBURG, model krmilnika: SELOGICA direct, Hidravlični stroj za brizgano oblikovanje, letnik 2019. Ta Arburg ALLROUNDER 270 C 400-100 ima silo zapiranja 400 kN in hod odpiranja 350 mm. Ima največji brizgalni tlak 2500 barov in brizgano težo do 29 g. Če iščete visokokakovostne zmogljivosti za brizgano oblikovanje, razmislite o modelu Arburg ALLROUNDER 270 C 400-100, ki ga ponujamo v prodajo. Za več podrobnosti nas kontaktirajte. - Nadzor: SELOGICA direct - Sila zapiranja: 400 kN - Sila odpiranja: 130 kN - Hod odpiranja: maks. 350 mm - Višina pritrditve kalupa (min.): 200 mm - Razdalja med ploščami (maks.): 550 mm - Razdalja med stebri (Š x V): 270 x 270 mm - Dimenzije plošče kalupa (Š x V): maks. 446 x 446 mm - Teža premikajoče se polovice kalupa: maks. 180 kg - Izmetna sila / hod: maks. 30 kN / 125 mm - Čas suhega cikla (EUROMAP): 1,2 – 189 s-mm - Velikost brizgalne enote: 100 - Premer vijačnega valja: 20 mm - Učinkovita dolžina vijačnega valja (L/D): 25 - Hod vijačnega valja: maks. 100 mm - Izračunana prostornina hoda: maks. 31 cm³ - Teža vbrizga (PS): maks. 29 g - Pretok materiala (PS / PA6.6): maks. 5,5 kg/h / 2,8 kg/h - Največji brizgalni tlak: 2500 bar - Največji tlak po vbrizgu: 2500 bar - Največja hitrost vbrizga: 64 cm³/s - Največji navor vijačnega valja: 120 Nm - Sila pritiskalne šobe / hod umika: maks. 50 kN / 180 mm - Moč gretja: 4,95 kW - Prostornina lijaka: 1,8 l - Napetost: 400 V 3~ 50 Hz - Nadzorna napetost: 230 V ~ 50 Hz / 24 V DC - Nazivni tok motorja / grelca: 42 A / 11 A - Skupni nazivni tok: 53 A - Skupna priključna moč: 29 kW - Moč črpalke: 11 kW - Prostornina hidravličnega olja: 165 l - Neto masa stroja: 2.180 kg Bjdpfx Aiozvm Azeqodh

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Arburg injection molding machine from 2000. 130 tons clamping force. The machine is delivered fully reconditioned at our facility in Heras (Cantabria). New seals installed in the clamping unit. We can demonstrate the machine in operation. Technical Details CLAMPING FORCE: 1300 kN PLATEN DIMENSIONS: 660 x 840 mm OPENING STROKE: 575 mm MAXIMUM DISTANCE BETWEEN PLATENS: 800/850 mm DISTANCE BETWEEN TIE BARS: 420 x 420 / 470 x 470 mm SCREW DIAMETER: 50 mm INJECTION VOLUME: 353 cm³ Bsdpferxtpdex Aiqjdh INJECTION SHOT WEIGHT: 117 g YEAR OF MANUFACTURE: 2000 INJECTION PRESSURE: 2500 bar

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, vpenjalna sila: 500 kN, tlak vbrizgavanja: 2,2 letvica, For sale is an injection molding machine from Arburg, model 320 S 500-150. The machine is fully functional. Technical data: - Clamping force: 500 kN - Tie bar spacing: 320 mm x 320 mm - Mold height: 225-350 mm - Platen dimensions: 445 mm x 445 mm - Maximum platen opening: 550 mm - Screw diameter: 30 mm - Injection pressure: 2,200 bar - Weight: 2,250 kg On request and for an additional charge, we can organize disassembly, loading, and transport for you across Europe. Bedpfeqmn Egex Aiqjdh Prices are subject to VAT. Viewing possible by appointment. Contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF MACHINING & METALWORKING MACHINES AND MORE Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or to get in touch, please visit our website.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, vpenjalna sila: 400 kN, premer vijaka: 30 mm, injekcijska masa: 79 g, Hydraulic injection molding machine from 2018. The Arburg ALLROUNDER 270 S 400-100 offers a maximum clamping force of 400 kN and screw diameters of 15 mm, 20 mm, or 30 mm. The maximum injection pressure is 2,500 bar for the smaller screws, and the maximum shot weight is 79 g when equipped with the largest screw. If you are looking for high-quality injection molding machines, you should consider the Arburg ALLROUNDER 270 S 400-100, which we have for sale. Contact us for further details. • Tie bar spacing: 270 mm • Injection unit: size 100 (per EUROMAP) • Operating hours: 4,261 h (automatic) • Screw diameter options: 15 / 20 / 30 mm • Max. swept volume: 18 cm³ (15 mm), 31 cm³ (20 mm), 71 cm³ (30 mm) • Max. shot weight (at 1.15 g/cm³): 20 g (15 mm), 35 g (20 mm), 79 g (30 mm) • Max. injection pressure: 2,500 bar (15/20 mm), 1,390 bar (30 mm) • Centering diameter: 125 mm Bdedsy Nkwljpfx Aiqeh • Vacuum pump capacity: approx. 25 m³/h • Pneumatic delivery volume: 1,000 l/min per circuit • Heating capacity per control loop: 3.6 kW / 230 V (protected by 16 A) • Drive motor voltage: 380-480 V (50-60 Hz)