Stroj za brizganje

Arburg 820s

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Arburg 820S 4000-2100/400 / Production Line with Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection Unit: Screw diameter: 60 mm Shot weight: 723 g Injection pressure: 2500 bar Dosage volume: 792 ccm Clamping Unit: Clamping force: 400 t Tie bar distance: 820x820 mm Platen size: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional Equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic core pull, needle type, proportional valve controlled x 4 pairs Hot runner control x 24 Reinforced injection units – bimetallic Proportional valve on vertical injection unit – precise injection Machine with six cylinders / batteries with compressed nitrogen (extra charge for fast operation) Parallel movements Automatic mold height adjustment Screw diameter in vertical injection unit: ⌀40 mm - 184 g/PS Built-in pressure monitoring system by Sensor Kistler – mold pressure measurement Original Weber rotary table: highly precise, electrically driven by a servo motor controlled via frequency inverter Rotary table diameter: 1200 mm Rotary table available at additional cost Klsdpfx Aezc N U Iebxju Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes driven by electric servo motors: X, Y, Z (telescopic) Travel strokes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel Robot safety package Robot with adapter and protective housing Robot available at additional cost Dimensions: Weight: 21,000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Krauss Maffei KM 900 – 8100 GX Injection Moulding Machine Year of manufacture: 2015 General Description: Hydro-mechanical, two-platen clamping system with 4 pressure pads on the fixed platen and 4 control units on the movable platen. The machine is equipped with a PV (proportional valve) injection unit regulation system. Control is provided by a modern MC6 system, based on an industrial PC with real-time Ethernet technology. The control panel features an integrated 19-inch touchscreen with a colour display, LED backlighting, and full process visualisation via ProcessDesigner. Plasticising unit: Complete system for thermoplastics processing Wear-resistant (abrasion-proof) version Screw diameter: 105 mm Shut-off valve and open nozzle Technical specifications: Clamping unit: Clamping force: 9,000 kN Mould opening force (pressure pads): 630 kN Platen dimensions (W x H): 1660 x 1530 mm Tie bar spacing: 1180 x 1000 mm Max. mould opening stroke: 1600 mm Mould height (min – max): 500 – 1100 mm Maximum opening stroke: 2100 mm Kjdswyxbgjpfx Abxjlu Ejector stroke: 300 mm Ejector force (forward / return): 140 / 70 kN Injection unit: Screw diameter: 105 mm L/D ratio: 23.0 Injection pressure: 1778 bar Injection volume: 4546 cm³ Shot weight (for PS): 3228 g Injection rate: 805 cm³/s Screw speed (standard): 150 rpm Nozzle touch force: 166 kN Electrical-hydraulic equipment: Pump motor power: 120 kW Heater power: 59 kW Number of barrel heating zones: 7 Dry cycle time / stroke (Euromap 6): 3.3 s / 826 mm Dry cycle time / stroke (KM standard): 2.9 s / 590 mm Oil tank capacity: 1450 l Dimensions and weight: Net weight (incl. control cabinet): 40 tonnes Machine dimensions (L x W x H): 10.72 x 3.03 x 2.51 m

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, vpenjalna sila: 4.000 kN, skupna masa: 22.500 kg, Hydraulic injection moulding machine from 2005. This Arburg SELECTA 820 S 4000 - 3200 offers a clamping force of 4000 kN and an opening stroke of 700 mm. The machine features a platen size of 1171 x 1171 mm and a maximum weight of the moving platen of 4500 kg. If you are looking for a high-quality injection moulding machine, you should consider the Arburg SELECTA 820 S 4000 - 3200, which we have for sale. Please contact us for further details. • Available quantity: 4 • Clamping unit: • Opening force: 100 kN • Opening stroke: 700 mm Klsdpfey A Ny Ejx Abxeu • Minimum mould height: 350 mm • Maximum daylight: 1550 mm • Tie bar spacing: 820 x 820 mm • Platen size: 1171 x 1171 mm • Max. weight of moving platen: 4500 kg • Ejector force: 100 kN • Ejector stroke: 250 mm • Injection unit: • Screw diameter: 70 mm • Screw L/D ratio: 23 / 20 / 18 • Max. screw stroke: 320 mm • Shot volume: 1323 / 1608 / 2036 cm³ • Max. shot weight (PS): 1215 / 1469 / 1860 g • Injection pressure: 2500 / 2000 / 1530 bar • Injection rate: 304 / 396 / 502 cm³/s • Screw speed: 350 rpm • Screw circumferential speed: 65 / 75 / 80 m/min • Screw torque: 2247 Nm • Nozzle contact force: 110 kN • Nozzle stroke: 600 mm • Drive and power: • Hydraulic pump motor: 55 kW • Total installed power: 96.2 kW • Heating: • Cylinder heating capacity: 6 zones (5500 + 4300 W) • Nozzle heater: 1250 W • Oil tank capacity: 590 l

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 33.255 h, vpenjalna sila: 4.000 kN, premer vijaka: 70 mm, skupna širina: 2.300 mm, skupna masa: 22.700 kg, največja dolžina izdelka: 8.000 mm, Ta 3-osna hidravlična brizgalka Arburg 820 S 4000-2100 je bila izdelana leta 2016. Ima zapiralno silo 4000 kN, vpenjalno ploščo velikosti 1171 x 1171 mm ter maksimalno višino za vgradnjo orodja 850 mm. S premerom polža 70 mm in brizgalno enoto 2100 je ta stroj odlično opremljen za vrhunske brizgalne zmogljivosti. Izkoristite priložnost za nakup te hidravlične brizgalke Arburg 820 S 4000-2100. Za več podrobnosti nas kontaktirajte. • Krmilni sistem: SELOGICA direkt • Razdalja med vodili: 820 x 820 mm • Velikost vpenjalne plošče: 1171 x 1171 mm • Maks. višina vgradnje orodja: 850 mm • Maks. potez odprtja: 700 mm • Maks. dnevna svetloba: 1550 mm • Izmetalna sila: 100 kN • Izmetalni hod: 250 mm Klodpfeyzrddjx Abxju • Maks. teža gibljive polovice orodja: 4500 kg • Brizgalna enota: 2100 • Ogrevalne cone: 6 + šoba • Moč pogona (hidravlična črpalka): ca. 55 kW • Skupna instalirana moč: 88,9-96,2 kW • Skupna priključna moč: 124 kW • Obratovalna napetost: 400 V 3~ 50 Hz • Strojni cikli: 4.157.591 • Delovne ure črpalke: 69.800 h • Avtomatske delovne ure: 58.556 h • Skupno delovnih ur: 33.255 h • Opcije stroja: 2x vleka jedra, sistem za varčevanje energije AES Dodatna oprema • ARBURG Multilift Select 15 kg robot (2016, prečni) • Nosilnost: 15 kg • Razširitev hoda Y-osi: 1400 mm • C-os: pnevmatična 0/90°, 28 Nm navora • Vakuumska oprema: 2 kroga (po 23 l/min) • Vmesnik za prijemalo: 8 vhodov / 4 izhodi (programabilni) • Ventilska oprema: 5/3-potni ventil • Varnost: nadzorovano nastavljivo delovno območje • Transportni trak: 800 x 2500 mm • Enota za vpihovanje zraka • Premer polža: 70 mm

Stanje: dober (rabljeno), Leto izdelave: 2004, Po želji, za doplačilo, lahko organiziramo naklad in prevoz (po vsej Evropi). Vse cene vključujejo DDV Ogled je možen po predhodnem dogovoru. Kontaktirajte nas, naše osebje vam bo z veseljem pomagalo. Možna je menjava ali odkup! Telefon: Mobilni: z veseljem tudi preko WhatsAppa) Spletna stran: Nakup/prodaja strojev NAKUP / PRODAJA PROIZVODNIH & OBDELOVALNIH STROJEV IN OSTALO. Potrebujete kakovosten, vendar cenovno ugoden stroj za obdelavo kovin za svojo proizvodnjo? Ali ga želite prodati? Za več informacij ali kontakt obiščite našo spletno stran, Kledexirqqopfx Abxeu

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 4.000 kN, premer vijaka: 80 mm, tlak vbrizgavanja: 2.500 letvica, For sale is an Arburg 820S 4000-2100 injection molding machine, serial number 195746. The unit is in good condition. Technical Data: Year of manufacture: 2004 Injection unit: 2100 Screw diameter: 80 mm Shot volume: 1407 cm³ Clamping force: 4000 kN Tie bar spacing: 820 × 820 mm Platen size: 1171 × 1171 mm Max. mold installation height: 850 mm Max. opening stroke: 700 mm Max. daylight: 1550 mm Ejector force: 100 kN Ejector stroke: 250 mm Max. weight of moving mold half: 4500 kg Hydraulic pump drive power: approx. 55 kW Total installed power: approx. 88.9–96.2 kW Number of heating zones: 6 + nozzle Net weight: 22,700 kg Dimensions (L × W × H): approx. 8.0 × 2.3 m Control system: SELOGICA Machine cycles: 4,157,591 Pump hours: 69,800 Automatic operation hours: 58,556 Transport and loading can be organized across Europe for an additional fee, upon request. Kodpexxi Nvofx Abxolu All prices exclude VAT. Inspection by appointment is possible. Please contact us—our team will be pleased to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or to get in touch, please visit our website.