Krčilni predor

AMTEC POF-L HS (high speed)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) Dksdpfx Aneh Ek Dajuou - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: novo, Leto izdelave: 2025, Sleeve wrapper/film banderoling machine for packaging very large products. Includes shrink tunnel. Features automatic product feed, automatic transport into the tunnel, and discharge. - Specifications (depending on actual product dimensions): Power supply: 380V, max. 40kW; Compressed air: approx. 6 bar; Max. machine cycle rate in idle mode: 8 cycles/minute; Max. product dimensions (mm): W (approx. 1000-1200) x H (approx. 500-600); Machine dimensions (mm): L (approx. 5600-9500) x W (approx. 2000) x H (approx. 2000); Weight (net/gross): approx. 1400-2400/1600-2700 kg. Dsdpfov Nl N Rex Anueku Please note that our new prices are frequently lower than the common prices for used equipment. Feel free to inquire and let us know your packaging requirements. - We generally have 30-50 different new machines available from stock for immediate delivery. For customer-specific machines, we offer very short delivery times starting from approx. 3 weeks. - All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Sleeve wrapper/film banderoling machine for packaging large products. Includes shrink tunnel. Fully automatic product feed, automatic transport into the tunnel, and discharge. - Specifications: Power supply: 380V, 21.0kW; Compressed air: 0.6m³, 6.0Bar; max. machine cycle rate (unloaded): 10 cycles/minute; max. product dimensions (mm): W750 x H300, machine dimensions (mm): L5060 x W1150 x H2000; weight (net/gross): 1200/1400kg. Please note that our new prices are often below typical used prices. Feel free to contact us and let us know your packaging application. – We typically have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from around 3 weeks. – All machines are available with a full warranty. Dsdpfsv Nl N Dsx Anusku

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, KALLFASS ovijanje s folijo s skrčljivim tunelom Naprava je sestavljena iz: 1) Kallfass Universa 8060/200 ovijalni/svarilni stroj za folijo 2) Compact 650SO skrčljivi tunel 3) Odtokovni transportni sistem (doplačilo) 4) Naprava za shranjevanje zapakiranih paketov (doplačilo) Blago, ki ga je treba zapakirati, je zavarjeno v polovično cev iz folije v Inversi in nato skrčeno v skrčljivem tunelu Compact, nato pa preko transportnega sistema prepeljano v skladišče paketov. Dodatne tehnične informacije => slike Djdpfx Aowcnqcenuoku Prosimo, pišite na e-naslov ali pokličite

Leto izdelave: 2025, stanje: novo, X-ray inspection system designed for trays, cartons, and large bags. Suitable for detecting foreign bodies made of metal, glass, stone, plastic, etc., in food or non-food products. - Specifications: Conveyor belt width: 600 mm; Detection accuracy: Pb from Ø 0.2 mm, Fe from Ø 0.28 mm, SUS from Ø 0.28 mm, non-metallic such as stone, glass, from Ø 1.2 mm; X-ray power: 150 kVp, 7.5 mA; Detector resolution: 0.4 mm; X-ray emissions: < 1 µSv/h; X-ray beam: horizontal scanning; Conveyor height: 750 ± 30 mm; Conveyor speed (depending on product): 10 – 60 m/min; Operator interface: 15" touchscreen; Software: intellisens®X-ray; Operating temperature: 5 – 35 °C; Ejection system: optionally available according to requirements; Power supply: 220VAC, 50/60Hz; System dimensions: L1800xW1300xH1900 mm; Weight: 580 kg. Please note that our new prices are often below the usual prices for used equipment. Feel free to contact us and let us know your packaging application. - We typically have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from approximately 3 weeks. - All machines are available with a full warranty. Dkedpfx Aev Nm Izenuou

Stanje: rabljeno, Leto izdelave: 1993, Filtrirna površina 121 m² Pretok zraka 13.200 m³/h Ventilator 15 kW RIEDEL sesalni sistem z celicnim rotacijskim ventilom - Leto izdelave: 1993 - Na lokaciji - Popolnoma funkcionalno Tehnični podatki: - Filtrirna površina: 121 m² - PP igelni filc s certifikatom BIA - Ventilator: 15,0 kW - Pretok zraka: 13.200 m³/h - Celicni rotacijski ventil z ekstrakcijskim koritom - Motorizirano tresenje 0,18 kW, Ex zaščiteno - Tehnična povrat toplote - Suha gasilna cev za silos ostružkov Dksdpfx Aoyk H Uusnueu - HC protipožarna loputa - Ventilatorska vrata 1,1 kW - Krožni cevovod med silosom in celicnim rotacijskim ventilom - Horizontalna preklopna loputa 900x400 mm z ročico

Stanje: novo, Leto izdelave: 2025, PRO version of the shrink tunnel for processing very large and very wide products in POF film at high speed. - Ideal in combination with the AMTEC Shrink SIDEshrink W60XXXL PRO version. Double air circulation, adjustable air flow, suitable for large products and/or high-speed packaging (recommended for SIDEshrink and FLOWshrink machines). - Max. product dimensions: L (unlimited) x W1100 x H230; tunnel size: L2400 x W1200 x H280; machine dimensions: L2400 x W1600 x H1260mm; power consumption: 380V, 28kW. Please note that our new equipment prices are often below the usual prices for used machines. Please feel free to contact us and tell us about your packaging requirements. – We usually have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we also offer very short lead times from around 3 weeks. – All machines are available with a full warranty. Dksdpfxov Nmade Anueu

Stanje: novo, Leto izdelave: 2025, Shrink tunnel for large products, PRO version for perfectly consistent temperature, ideal in combination with the AMTEC MAXIshrink W15 4XL PRO version. Suitable for polyolefin films. Speed and temperature adjustable. Specifications: 380V, 24 kW; Speed: 0-30 m/min; Temperature: up to 175°C; Max. product dimensions (mm): W940 x H250; Machine dimensions (mm): L2800 x W1460 x H1280; Weight (net/gross): approx. 350/400 kg. Dodpfx Anov Nl Umjueku Please note that our new prices are often lower than typical used equipment prices. Feel free to contact us and let us know your packaging requirements. - We generally have 30-50 different new machines available from stock at all times. For custom-built machines, we also offer very short delivery times starting from around 3 weeks. - All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Sleeve packer/film banding machine for packaging large products. Fully automatic product infeed, automatic transfer into an optional tunnel (SHRINKtunnel-PE-XL), and outfeed. - Specifications: PLC from MITSUBISHI/Japan; 380V, 2kW; 6 bar, 0.1 m³/min; maximum idle machine cycle rate: 25 cycles/minute; maximum product dimensions (mm): L700xW500xH330, (W+H... Djdpfsv Nl Imsx Anujku

Stanje: novo, Leto izdelave: 2025, SHRINK tunnel can be combined with the AMTEC Shrink Wrapper SPEEDshrink 35L. High-speed shrink wrapping with 0-20 m/min for POF film (polyolefin). - Specifications: Max. packaging dimensions: W550xH250mm, tunnel size: L1500xW650xH300mm, power supply: 380V, max. 18kW, machine dimensions and weight: L1800xW1140xH1300mm, 700kg. Dsdpfxev Nl Tvo Anueku Please note that our new equipment prices often undercut typical used machine prices. Simply get in touch and let us know about your packaging requirements. – We typically have 30-50 different new machines available from stock for immediate delivery. For customer-specific machines, we offer very short lead times starting from approximately 3 weeks. – All machines are supplied with a full warranty.