Tračna žaga

AMADA HA250W

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4,000 rpm, main spindle/sub-spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. On-site inspection possible. Lasdjv Scrhspfx Aamjd

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2024, This FORMAT4 TEMPORA 60.06 glueBox x-motion edgebander was manufactured in 2024. It features a rotary magazine table with a diameter of 750 mm for edge material from 0.4–3 mm, a GlueBox application unit, as well as top and bottom polishing units. The machine is equipped with an advanced x-motion Plus control system featuring a 15" SmartTouch display and a multifunctional milling unit for precise processing of plastic edges. Contact us for more information on this machine. Additional equipment • Application unit with Teflon coating for 1.5 kg EVA granulate • Top and bottom polishing unit Machine advantages Lasdpfox D Hbtsx Aamod Technical machine benefits • Height adjustment for positioning of workpieces: 8–60 mm • Rotary magazine diameter: 750 mm for edge material 0.4–3 mm in rolls • Rotary magazine for edge material with ball bearings, plate diameter: 740 mm • GlueBox application unit • Milling unit with two motors: 0.35 kW (1 HP), 12,000 rpm, HW saw blades, Z 24, D-100x20x3.2 mm, pneumatically tiltable 0°–10° • Top and bottom multifunctional milling units // top and bottom profile sanding machine x-motion plus, for processing plastic edges of 2 and 3 mm • Motorized corner rounding unit with 2 motors, electronic adjustment for milling the front and rear edge profiles of the top/bottom edge for edge thickness of 0.4–3 mm and feed speeds up to 10 m/min • Pre-milling unit with assigned diamond-tipped cutters, speed 12,000 rpm, 2x 1.5 kW • Edge and workpiece thickness measurement with Bluetooth technology Additional information Power supply: 3x400V 50/60Hz Chain feed with 2 speeds, feed rates: 10 and 18 m/min Control system: x-motion Plus control with 15" SmartTouch

Stanje: dober (rabljeno), Leto izdelave: 2001, Manufacturer: KASTO Model: KASTOtec A3 Year of manufacture: 2001 Specifications Laodpfou R R Acjx Aamed Metric Sawing capacity round 90°: 330 mm Sawing capacity flat 90°: 330 x 330 mm Maximum sawing speed: 12 - 120 m/min Saw blade dimensions: 6830 x 41 x 1.3 mm Power: 7.5 kW Dimensions (approximate): - Length: 4600 mm - Width: 2150 mm - Height: 2310 mm Weight: 4300 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. Details are given in good faith but accuracy cannot be guaranteed. No representation or contractual terms are implied. We recommend verifying all critical details independently.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, - 3-osiowe centrum CNC SCM Pratix S Laedpfx Aajuu Ntgemsd - model PRATIX 12B z 2012 roku. - Zakres osi X, Y, Z: 2500x1250x150+ mm - Liczba miejsc na narzędzia w magazynie: 8 - Stół maszyny: stół aluminiowy rastrowy, 2 sekcje. - Sterowanie: sterowanie PC - Oprogramowanie: SCM NESTING, SCM XILOG MAESTRO - Numer seryjny: AH/115920 Liczba osi frezujących: 1 Agregat wiertarski: 1 – praktycznie nieużywany Maksymalna prędkość obrotowa wrzeciona: 24 000 obr./min Uchwyt narzędziowy: HSK-F63 Silnik główny: 6,6 kW Konstrukcja bramy: maszyna z ruchomą bramą Pompy próżniowe: 2 szt. BECKER z 2012 roku – jedna ustawiona na zewnątrz, druga zainstalowana w maszynie. Wydajność pomp próżniowych m³/h: 240/280 m³/h Interfejs do odczytu formatu CAD (.dxf) Zabezpieczenia: Odrzuty Waga ok. 2500 kg Długość: 5900 mm Szerokość: 2790 mm Wysokość: 2190 mm Automatyczny pomiar długości narzędzia

Stanje: rabljeno, Leto izdelave: 2013, Žične erozijske stroji / EDM Pomik X: 600 mm Pomik Y: 400 mm Pomik Z: 350 mm Maks. velikost obdelovanca X: 800 mm Maks. velikost obdelovanca Y: 570 mm Maks. velikost obdelovanca Z: 340 mm Maks. teža obdelovanca: 1000 kg Velikost mize X: 1050 mm Velikost mize Y: 710 mm Z avtomatskim napeljevanjem žice Os U/V: 150 x 150 mm Rezanje v vodni kopeli CNC krmiljenje: SPW Lodpfx Aasy S Tgzemjad

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, LVD Press Brake 4000 x 200T Type: PPBL 200/40 Capacity: 4000 x 200T Maximum stroke: 150 mm Weight: 13.5T With mobile blade holder rack Laedpfx Ajwtmi Eeamsd

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), A CNC precision parallel lathe Pinacho is available. Center height: 180 mm, distance between centers: 750 mm–1000 mm, turning diameter over bed/cross slide/top slide: 360 mm/335 mm/198 mm, bed width: 250 mm, spindle bore: 42 mm, spindle speed: 4000 rpm, feed rate X/Z: 10 m/min, rapid traverse X/Z: 10 m/min. Tailstock quill diameter: 58 mm, tailstock quill travel: 200 mm, Morse taper: MT3, min. steady rest/follow rest passage: 10 mm, max. steady rest/follow rest passage: 70 mm/114 mm, control: Fanuc 0i. Documentation available. On-site inspection possible. Lsdpfx Aaewftcvomjad

Stanje: dober (rabljeno), Strojev za pranje pladnjev, neposredno iz nedavno zaprte tovarne za brezmesne izdelke. V izjemno dobrem stanju. Lsdpfx Ajrfdq Ueamjad

Stanje: rabljeno, Leto izdelave: 2020, DOOSAN PUMA 3100LY Krmiljenje FANUC LETO IZDELAVE: 2020.11 Velikost vpenjalne glave: 12 palcev Ledpjzc Nznefx Aamsad Največji premer struženja: 420 mm Največja dolžina struženja: 1285 mm Premer obdelovanca (palica): 102 mm Pomik osi Z: 1350 mm Pomik osi Y: 130 mm Pomik osi X: 293 mm Konjiček Podpora SMW AUTOBLOCK - Transporter za odvoz odrezkov s strojem - Dokumentacija

Stanje: rabljeno, Leto izdelave: 2020, max. workpiece length 3740 mm milling spindle 1 unit main motor 15 kW CNC control system Felder Format4 Type Profit H500S 16.38 CNC machining center for sale on behalf of customer ----- - From a wood window production facility. - Machine is still connected and ready for demonstration - Without machining tools Technical Description (summary, full text see PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Axis travel paths: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional locking mechanism for the C-axis - Boring head DH 18 6H1S: vertical boring unit with 12 spindles (7 spindles in X-direction, 5 spindles in Y-direction, slot saw in X-direction) Horizontal boring unit with 6 spindles, 4 in X-direction and 2 in Y-direction. 1 slot saw in X-direction, max. diameter 120 mm - Disc tool changer with 24 tool positions on the right side of the machine stand max. tool diameter 240 mm max. tool height 370 mm - Tool change position for circular saw blade mounted on the gantry/tool changer, max. saw blade diameter 350 mm - Tool changer on the left in the machine stand with 10 tool positions. max. tool diameter 180 mm max. tool length 230/300 mm collet distance 110 mm - Disc tool changer with 24 tool positions mounted on the gantry, traveling in X-direction max. tool diameter 240 mm max. tool height 370 mm - Mobile pick-up station for chip deflector - 6 workpiece supports, s-motion, position-controlled - 2 machining zones for pendulum operation - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved arch processing - Including all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety device - Software "WoodFlash" Lamello Clamex P Macro Notching Macro - "Greenline Package" for reduced energy consumption ----- Price for the above-mentioned machine on request! ----- Optional new Oppold tool set for H500: Windows Timber windows IV 68, 78 and 88 inward-opening, with changeable rebate on the side and top. Glazing rebate 20mm, frame and sash shoulder 20° bevel with loose and pre-milled glazing bead Old building timber windows IV 68, 78 and 88 inward-opening, without rain bar, with changeable rebate on side, top and bottom. Glazing rebate 20mm, frame and sash shoulder 15° bevel with hung weather bar Timber-aluminium windows (system provider: Gutmann Mira, slanted rebate system) HA IV 68, 78 and 88, inward-opening, 2 sash variants: square and slanted, changeable rebate bottom, side & top Entrance doors Timber HTIV 68, 78 and 88 with single rebate in the frame and double rebate in the sash, inward-opening, 1 sash variant, glazing rebate, without changeable rebate offset construction Timber-aluminium IV 68, 78 and 88 with single rebate in the frame and double rebate in the sash Lift-slide doors Laodpfxjyq Sztj Aamod Timber-HS IV 68, 78 and 88, without frame production Timber-aluminium-HS IV 68, 78 and 88, without frame production Execution...