Kombinirani stroji za luknjanje in laser

Amada ACIES 2515T

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.050 mm, dolžina pomika po osi Y: 360 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 360 mm, pomik po osi Z: 500 mm, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, Tiger FO 135 Universal Milling Machine Description: The machine was purchased new in 1994 and has only seen minimal hours of operation. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition, featuring an automatic lubrication system. The table is also in very good condition, with barely any signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, allowing for work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications: • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travel: ➢ Longitudinal (X): 1,050 mm ➢ Cross (Y): 360 mm ➢ Vertical (Z): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed range: ➢ Vertical axis: 33 to 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 to 1,550 rpm, 12 speeds • Installed drives: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor, 15 Nm • Infinitely variable feed rate: 0 – 1,500 mm/min • Rapid traverse: ➢ Longitudinal and cross: 3,000 mm/min Fpsdpsrqwbiefx Anfsg ➢ Vertical: 1,500 mm/min • Universal head with 80 mm manual quill travel • Automatic lubrication with pump • Low voltage electrical controls on side arm control panel • Star-delta start • Magnetic thermal protection by Siemens • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories: • Counter supports for cutter arbor • Cutter arbor ø32 mm

Stanje: dober (rabljeno), Leto izdelave: 2017, In this offer, you are purchasing used office furniture that is in good condition. The items were delivered in 2017 and are generally in very good condition due to minimal use. Items for Sale: We also offer workstation sets for €450 each. Fpjdpfx Aneiiv Iksfsg 1x Desk - Manufacturer: FM - 160 x 80 x 76 cm (continuously height-adjustable from 68 cm to 76 cm) - Grey tabletop - Aluminium frame 1x Office Chair "Dauphin MagicShape elan" - With armrests - Fully adjustable - Upholstery: Polo fabric, grey/black 1x Mobile Pedestal - Manufacturer: FM - 43.4 x 80 x 59 cm - One material drawer - 3 steel drawers with soft-close function - Lockable, incl. key Desks: • Approx. 10x desks by FM 1600 x 800 x 680 to 760 mm (continuously height-adjustable) in light grey. Frame made of aluminium. • Approx. 10x folding tables (can be used as desks) 1600 x 800 x 720 mm on castors, in light grey. Aluminium frame. • Approx. 2x round meeting tables, 1000 mm diameter, in light grey. Aluminium frame. • Approx. 4x high desks 1600 x 800 x 1300 mm in arctic white. Frame in white, aluminium. Chairs: • Approx. 10x Dauphin swivel chairs MagicShapeS elan with armrests, fully adjustable. Upholstery: Polo, black, base in black plastic. • Approx. 44x Interstuhl Hero 550H cantilever chairs with armrests. Upholstered in ruby red. Chrome metal frame. • Approx. 52x Interstuhl Hero 550H cantilever chairs with armrests. Upholstered in ocean blue. Chrome metal frame. • Approx. 10x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in black. Frame in silver. • Approx. 16x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in ocean blue. Frame in silver. • 12x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in red. Frame in silver. • 16x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in ruby red. Frame in silver. Storage: • Approx. 16x mobile pedestals by FM 434 x 800 x 590 mm with one material drawer and 3 steel drawers. Carcase in light grey. Handles in aluminium. Meeting table with 4 conference chairs – €750 net High table with 6 bar stools – €1,500 net Prices may vary slightly depending on the quantity purchased. We are happy to make you an individual offer. You can also purchase each piece of furniture individually. Condition: These are used items, which may show signs of use (minor scratches or yellowing). Packaging and Shipping: You are welcome to inspect everything during our business hours. Please schedule an appointment! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Machine weight approx.: 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt Fpsdpfx Anet Hw Iijfeg (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts up to a minimum length of 80 mm. Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Stanje: dober (rabljeno), Leto izdelave: 1979, Model building milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making mill -Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories Fsdpfonzpx Rsx Anfopg -Rotatable cross table: 490 x 400 mm -Traverse paths: X/Y/Z 320/385/430 mm -Spindle taper: SK30 -Drive power: 1.1 kW -Speeds: 560 to 14,000 rpm, 8 steps -Accessories: included, see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Stanje: novo, Leto izdelave: 2026, Design your production facility to achieve optimal ergonomics, efficiency, and profitability. Sheet metal from coil saves money, reduces waste, and frees up storage space. Whether your sheet metal workshop is large or small, we have the right solution for you. CIDAN Machinery offers a wide range of products that can be configured into an efficient, custom-tailored production line, where parameters such as output, distance, time, and material accessibility are crucial for fast and cost-effective manufacturing. Fpsdpfxemfn Icj Anfjg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Tool Milling Machine Kunzmann WF 600M with Heidenhain TNC 128 Control – Excellent Condition, CE-Compliant! Technical Specifications: Fsdpfxowz Eu Nj Anfepg - Year of manufacture: 2015 Machine No. 610398 - Clamping surface of milling table: 800 x 425 mm - Number of T-slots: 6 - T-slot width: 14 H7 - T-slot spacing: 63 mm - Max. load: 300 kg - Spindle speed range: 1–4500 rpm - Stepless feed rate: 0–2000 mm/min - Rapid traverse, X and Y axes: 5000 mm/min - Z axis: 4000 mm/min - Travel distances X/Y/Z: 600/400/400 mm - Vertical and horizontal quill – SK40 - Hydraulic clamping system - Weight: approx. 2025 kg - Dimensions (LxWxH): approx. 2 x 2 x 2 m - Main drive motor: AC three-phase motor - Output at 100% duty cycle Accessories and Equipment: - Heidenhain TNC 128 control - Hydraulic clamping vertically and horizontally - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, operating manual - Coolant system About the Machine: For sale is a Kunzmann WF 600M tool milling machine equipped with a Heidenhain TNC 128 control system. The TNC 128 features numerous dialog-guided cycles with graphic simulation for fast and easy data input, e.g. various drilling cycles, thread cutting, bolt circles, linear drilling patterns, rectangular pockets, rectangular studs, and surface milling. This universal milling machine is in nearly new condition. The control is very user-friendly. The machine is equipped with hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very simple via the swiveling vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested on our premises. Take the opportunity to inspect and test the Kunzmann on site under power.

Stanje: novo, Leto izdelave: 2025, največja hitrost vretena: 8.000 obr/min, hitrost vretena (min.): 8.000 obr/min, 1 Mehrspindel-Drehautomat TORNOS SAS16-DC im Wiederaufbau - neuer Schaltschrank SIEMENS oder FANUC, wählbar – Abholtisch mit Bremse – verstellbarer Anschlag mit Gegenbetrieb Fedpfx Asugl S Ienfjpg – 3 unabhängige Vorschubsysteme – mehrere Werkzeughalter und Bohrvorrichtungen – Trommelstangenführung mit Unterstützung – Optionen: automatischer Stangenlader IEMCA PRA, numerisches Gewindeschneiden, CNC-Querschlitten, etc. Kontaktieren Sie uns.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 82.500 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 5.000 mm, pomik osi Y: 3.000 mm, pomik po osi Z: 1.750 mm, hitrost pomika os X: 65 m/min, hitrost podajanja osi Y: 65 m/min, hitrost podajanja os Z: 65 m/min, največja hitrost vretena: 20.000 obr/min, hitro pomikanje X-os: 65 m/min, hitri pomik os Y: 65 m/min, hitri pomik na osi Z: 65 m/min, vrtilni moment: 63 Nm, skupna masa: 90.000 kg, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Commissioning: 2008 Control: Heidenhain iTNC 530 incl. HR420 handwheel X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ±360° Maximum workpiece dimensions 3,800 mm (X direction) 1,800 mm (Y direction) 1,150 mm (Z direction) 5-axis machining with a 300 mm long tool in a single setup (A-axis at 90° can be programmed). Machine on power: approx. 82,500 h Total spindle hours: approx. 36,500 h Clamping table No machine table included with the machine. Upon request, we are happy to offer a customized solution at extra cost. 2-axis fork-type milling head 5 Spindle power: 20 kW Spindle speed: max. 20,000 rpm Torque: max. 63 Nm Tool holder: HSK 63A Tool clamping: hydraulic Holding torque (clamped), A & C axes: 2,000 Nm Linear axes drives Feed rate X-, Y- and Z-axis: up to 65 m/min Axis acceleration X-, Y- and Z-axis: up to 5 m/s² Electrical data Voltage: 400 V Frequency: 50 Hz Power requirement: 130 kW Dimensions, weights Space requirement for machine without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Colour Enclosure, gantry, control cabinet: RAL 7035 light grey Fpedpexl R Hvefx Anfsg Milling head and applications: RAL 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-position tool changer - Work area enclosure Optional at extra cost: - Renishaw RMP60 touch probe - BLUM LaserControl NT mini Machine condition Fully functional, in very good condition. Can be inspected under power until April 2026.

Stanje: dober (rabljeno), Leto izdelave: 2014, Technische Daten sind auf den Fotos ersichtlich. Die per Hand gezeigten Teile sind nicht im Lieferumfang enthalten. Fpsdpfeufp Svjx Anfog

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 450 mm, pomik osi Y: 200 mm, pomik po osi Z: 960 mm, število osi: 5, Ta 5-osni Mazak INTEGREX J-200 S je bila izdelana leta 2021. Ima največji obdelovalni premer 500 mm, X-hod 450 mm, Y-hod 200 mm in Z-hod 960 mm. Stroj je opremljen z 36-orodnim magazinom in največjo hitrostjo vretena 4.000 vrt/min. Če iščete visokokakovostni stružno-rezkalni stroj, priporočamo Mazak INTEGREX J-200 S, ki ga imamo v prodaji. Za več informacij nas kontaktirajte. Fpsdoyxc N Eepfx Anfog • Krmiljenje: Smooth G • Razdalja med vreteni: 1000 + 440 mm • Največji obdelovalni premer: 500 mm • Priključek vretena: A2-6 • Največja kapaciteta palic: 65 mm • Premer vretenine: 76 mm • Magazin orodij: 36 Capto Dodatna oprema • Transporter odrezkov: trakasti tip Mayfran