Vijak kompresor 30 kW, 4,12 m³/min

ALMIG Belt 30

Stanje: novo, Leto izdelave: 2026, - Capacity: 1.2 mm - Working width: 250 mm - Supplied with 8 sets of rollers Itodpfxjgg Nrke Al Nsf

Stanje: rabljeno, Technical data: Max. planing width: 230 mm Max. planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle configuration: bottom 5.5 kW right + left 11 kW top 7.5 kW universal 5.5 kW Each spindle driven by a separate motor Itsdpfx Aljmiik Ts Nof Number of steel feed rollers (top): 5 Number of rubber feed rollers (top): 3 1 rubber roller in the table Extraction port diameter: 150 mm Stepless feed speed adjustment: 4–24 m/min Feed via drive shafts (cardan shafts) Table lubrication pump Operating pressure: 6 bar Electric height adjustment of the machine frame Power supply: 400 V Overall dimensions: Length: 4,240 mm Width: 1,550 mm Height: 1,560 mm

Stanje: rabljeno, Leto izdelave: 2001, Širina udarne stene: 4000 mm Višina udarne stene: 1000 mm Zunanje dimenzije: 4600 x 1500 mm 2 x 1,5 kW motorja Skupni nazivni volumenski pretok: 7000 m³/h Odsesovalni priključki levo in desno s premerom 300 mm Lokacija skladišča: Garbsen Itjdpfx Alevvizks Nof

Leto izdelave: 1990, stanje: delavnici obnovljeno (rabljeno), Weinig 4-sided planer with 7 heads, 7 universal, configuration: horizontal lower, vertical right, vertical left, vertical right, upper horizontal, lower horizontal, and the last universal. Drive is transmitted via cardan shafts. Drive secured with Rotax safety clutches. Workpiece is clamped pneumatically. Feed speed steplessly adjustable by inverter. Machine feed rate: 0-42 m/min. Motors: 2.5 kW and 7.5 kW. Table reground and new. Additionally, new wiring and new electrics installed. Machine after a complete overhaul. Warranty included. Isdpopqxnxjfx Al Netf

Stanje: kot nova (razstavni stroj), Leto izdelave: 2011, Used steel storage tank according to EN 12285-1 (with test certificate), double-walled, suitable for underground storage of heating oil and diesel fuels, 1 manhole (optionally also available with 2 manholes). Capacity: 100,000 litres Diameter: 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg Additionally, we can equip our tanks with the following accessories: - Leak detection system with under- and overpressure leak indicators - Manhole shaft with shaft cover, available in walk-on or drive-over versions - Partition walls (for multi-chamber tanks) - Internal coatings (e.g. two-component epoxy resin), partial or full lining - Content and level measurement instruments as well as control and regulation technology - Electric tank heaters - Pumps for heating oil, diesel, biodiesel or petrol - Fuel dispensers for diesel, biodiesel and petrol – optionally with complete tank data acquisition - External tank insulation with PU foam The tank is internally cleaned, and the external coating has been overhauled and tested at 14 kV. Cost-effective delivery with our own truck possible. Simply inform us of the delivery location and you will receive an immediate quote for exact freight costs. Itodpfx Alji Enxdo Nof Should you require further information, simply call us or send us an email. Trade-in and purchase of tanks/containers possible, please feel free to contact us regarding this. Delivery time by arrangement! We always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 litres

Stanje: zelo dobro (rabljeno), skupna širina: 36.000 mm, skupna dolžina: 90.000 mm, skupna višina: 9.500 mm, Zum Verkauf: Hochwertige Stahlhallenstruktur – ASTRON LINDAB Guten Tag, Wir bieten eine äußerst robuste und langlebige Stahlhallenstruktur von ASTRON LINDAB mit einer Gesamtfläche von ca. 2.800 m² und einer Höhe von über 8,5 Metern zum Verkauf an. Itedpfjylc Uyex Al Nsf Diese Struktur wurde ursprünglich in Warschau für das renommierte Unternehmen PURMO RETTIG HEATING, einen globalen Marktführer im Heizungsbereich, errichtet. Vor einigen Jahren wurde das gesamte Grundstück, auf dem sich die Halle befand, verkauft und zu einem neuen Wohnkomplex umgebaut. Infolgedessen wurde die Lagerhalle unter Aufsicht von ASTRON LINDAB vollständig demontiert. Alle Bauteile wurden ordnungsgemäß transportiert und exakt nach den Vorgaben von ASTRON LINDAB auf einem anderen unserer Grundstücke wieder aufgebaut. Die Demontage und der Wiederaufbau wurden von einem professionellen Fachunternehmen durchgeführt. Jedes Bauteil ist katalogisiert, beschriftet und nummeriert. Technische Daten: Gesamtfläche: ca. 2.800 m² Spannweite: 36,6 Meter Gesamtlänge: 90 Meter Höhe: 8,64 Meter (maximale Höhe 9,36 Meter) Anzahl der Segmente: 14 Keine Stützen im Innenbereich Verkauf als Modul möglich: Die Halle kann auch in zwei oder drei kleinere Module verkauft werden, zum Beispiel: 1.500 m² / 1.000 m² / 800 m² Bitte beachten Sie: Der Preis für kleinere Module ist um 25 % höher. Aktueller Marktpreis für eine neue, identische Konstruktion beträgt ca.: 450.000–500.000 EUR netto / 1.900.000–2.100.000 PLN netto Wichtige Informationen: Zum Verkauf gehören nicht nur die Hauptkonstruktionselemente, sondern auch die Verbindungsbeschläge, die Dachkonstruktion aus Stahl, Bolzen und Muttern sowie zahlreiche weitere Kleinteile aus der Demontage. Sämtliche Originalschrauben, Muttern und Komponenten sind sorgfältig sortiert und in zwei großen Überseecontainern gelagert. Sie sind lediglich für den Kauf und die Montage der Dämmung sowie der Dach- und Wandverkleidungselemente verantwortlich. Dach- und Wandpaneele sind nicht im Lieferumfang enthalten und müssen nach der Montage der Hallenkonstruktion neu angeschafft und installiert werden. Ebenso liegt die original Konstruktionsdokumentation der Halle vor und auf Wunsch kann ein Tragwerksplaner für eine neue Ausführungs- oder Anpassungsplanung zur Verfügung gestellt werden. Dieses Angebot stellt eine einmalige Gelegenheit dar, eine vergleichbare Lagerhalle zu wesentlich geringeren Kosten zu realisieren. * * * HINWEIS 1: Wir sind offen für ein Co-Investment mit einem Grundstückseigentümer zum gemeinsamen Bau der Halle – Konditionen nach Vereinbarung. HINWEIS 2: Es besteht die Möglichkeit des Tauschs gegen Immobilien, einen Luxuswagen oder andere Werte. Wir laden Interessenten herzlich ein. PREIS: 179.000 Euro / 750.000 PLN Wir freuen uns auf Ihre Kontaktaufnahme durch seriöse Kaufinteressenten.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8153336470, skupna masa: 616 kg, volumenski pretok: 399 m³/h, tlak (min.): 4 letvica, tlak (maks.): 13 letvica, raven hrupa: 67 dB, vrsta hlajenja: zrak, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, hladilni sušilnik, We are a company specializing in compressed air technology for over 20 years. Our professional service level and high-quality, market-proven products guarantee a successful business relationship with you. We offer a NEW Atlas Copco GA37VSDs FF rotary screw compressor (variable speed with integrated dryer). The machine features a frequency inverter (VSD), engineered with the latest technology, resulting in increased efficiency and productivity: - On average, 20% lower specific energy consumption (SER) compared to previous GA VSD series models. - Environmentally friendly and efficient VSD+ variable speed drive reduces energy usage by up to 50% on average compared to fixed-speed idle models. - Independent of energy savings, there is up to 12% increase in FAD (Free Air Delivery) output. - High-efficiency fan motor (ERP 2015 compliant) reduces both energy consumption and noise levels. - Superior motor efficiency (iPM) up to 94.5%, exceeding IE3 efficiency standards. Engineered to work hard for your success. The market-leading GA series oil-injected rotary screw compressor delivers unmatched performance, high productivity and low maintenance costs—even in the toughest conditions. Technical specifications: - Output at 4 bar: 15.69-13.75 l/s / 0.94-7.85 m³/min - Output at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m³/min - Output at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m³/min - Maximum pressure: 10 bar (13 bar version available on request) - Voltage: 400 V - Motor: 37 kW Itedpfx Aljwlp Hds Njf - Noise level: 67 dB(A) - Weight: 616 kg - Internal permanent magnet motor (IPM) - Compression element - Direct drive - Innovative fan - Durable oil separator/filter - Electronic zero-loss condensate drain - Elektronikon controller - Inlet valve - VSDs module - Manufacturer code: 8153336470 If you are unsure whether this unit is right for you or have not found a suitable compressor, CALL US! We will advise you on the right equipment selection. We invite you to explore our full range.

Leto izdelave: 2013, stanje: rabljeno, Features: * Used telescopic belt conveyor * Condition: fully functional with signs of use * Ideal for fast material transport * Professionally dismantled and packed * Including support legs * Including control cabinet * 3 units in stock * Price per unit Technical Data: Manufacturer: VanDerLande Year of manufacture: 2013 Model: TTB-800-4x16 Belt direction: loading and unloading Color: anthracite grey Total length retracted: 5,550 mm Total length extended: 16,000 mm Total width: 1,500 mm (incl. control cabinet) Iodpfx Aloiuqcwo Njtf Width: 1,220 mm Belt width: 800 mm Condition: good (used) Belt type: smooth / black Conveying height: 1,100 mm Net weight: 3,300 kg Two selectable speed levels. Telescopic Belt Conveyor The telescopic belt conveyor is ideal for linking machines or workstations in picking zones and for optimizing internal logistics processes. When in operation, the telescopic belt conveyor can convey sensitive and variously sized bins, boxes, or other packaging and item units to or from loading/unloading points; it can also be used as a connecting segment before or between production and processing machines. Additionally, it enables efficient parts transport within operations and warehouses, making it suitable for handling significant volumes and distances. Tailor-made Solutions for Your Intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide you with a customized offer or advise you on planning or installation questions. Simply let us know your requirements and site conditions. Benefit from our many years of experience and excellent network of specialists. We have successfully completed projects for companies in a variety of sectors, such as logistics, the pharmaceutical industry, skilled trades, and the electronics sector. Together, we will find ways to cost-effectively and sustainably optimize your processes and material flow. We can also offer fully automated sorting systems or supplementary components such as picking shelves or bins.

Leto izdelave: 2020, stanje: generalkompletno obnovljen (rabljeno), Dear customers! Our experience has shown that communication via email usually only causes unnecessary delays. We would like to assist you quickly, and for that, it’s better to talk on the phone for three minutes rather than exchanging emails for three days. TSWi 20.20 Dry Spray Booth Dimensions: 2000 x 2000 mm (W x H) Fan is integrated into the wall Airflow: 7,200 m³/h Motor: 1.50 kW, explosion-proof Exhaust duct: 400 mm Ø Depth: 900 mm Double filtration: Paper filter + Paintstop filter mat using clamping strip (+150,- EUR net) Options/additional cost for: Transition from square to round: 150,- EUR net Paintstop filter mat clamping strip: 150,- EUR net Side deflector plates with hinges: 590,- EUR net Images may differ. We are also happy to offer you complete spray rooms with supply air unit, heat exchanger, supply air ceiling, ducting and more. Itjdpfxjfr T Eqs Al Nsf Just contact us.

Stanje: novo, *Technical Standard Specification: Device type: 6/150 Itedpfofnvwqex Al Nsf Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C supply temperature, 15°C cooling water temperature, and a pressure differential between cooling water inlet and outlet of at least 2 bar) Medium: Water up to 150°C Maximum external volume: 9 liters at 150°C *Functional Equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return line of circulation and cooling water inlet - Reversing circuit for leak-stop operation (operable up to system shut-off temperature) - Ball valves in supply and return - Automatic temperature-dependent system shut-off - Fill duration monitoring and aqua timer - Adjustable pump run-on - Adjustable temperature alarm - Options: interface cable - Control unit SBCmini with relay for collective alarm, 230V, at the rear of the controller on terminal - Heating control SSR - Switch cabinet IP54 - Interface 20mA TTY; Arburg pin assignment - Cekon plug 16A - Corrosion-resistant components (stainless steel, brass) - Device mounted on castors, two of which are steerable with brake - Additional temperature safety device for secure shutdown of the heater on heating contactor - Bypass between supply and return with reduced cross-section *Pump: Type: Y2051 Flow rate (max) 27 l/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Design: submersible pump / peripheral impeller *Dimensions / Weights / Colours Dimensions (L/W/H): 600 mm x 240 mm x 493 mm (excl. connections) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey, Front door: RAL 5015 sky blue *Connections: Circulation medium: socket G1/2" Cooling water: socket G3/8" *This device is compliant with European directives. Other guidelines and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in quotations or order confirmations.