Sistem čistega odvoda zraka s stiskalnico za brikete

AL-KO

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8118133, vrsta vhodnega toka: trifazni, filtrirna površina: 50 m², negativen tlak: 3.365 Pa, skupna višina: 2.660 mm, skupna širina: 1.550 mm, skupna dolžina: 3.800 mm, nazivni pretok: 6.920 m³/h, premer sesalne cevi: 350 mm, vhodna napetost: 400 V, Maks. volumenski pretok: 7950 m3/h Nazivni volumenski pretok: 6927 m3/h pri 3365 Pa Premer priključka: 350 mm Filtrirna površina: 50 m2 Razred prahu "M", AWN 16 Cone Moč motorja (ventilator): 11 kW Regeneracija filtra: pnevmatsko-mehanska Raven zvočnega tlaka: 70 dB (A) Vključuje originalno SCHUKO električno omarico V24 Dkedexyi Unepfx Afljg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Working width: 520 mm Cutterhead: Tersa Number of knives: 4 Planer table length: 2720 mm Adjustment of planer table: Lever Hollow and pointed joint adjustment: No Chip removal display: Scale Hollow/pointed joint display: - Planer fence angle adjustable: Yes Dodpfx Asgr Udveflekg Motor power: 7 kW Machine length: 2800 mm Machine width: 1000 mm Weight: 870 kg

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Condition: The machine was operated in Germany and regularly maintained (last maintenance by Homag in 11/2024) Equipment and technical data: Workpiece thickness min.: 12 mm Workpiece thickness max.: 60 mm Minimum workpiece size (L×W): 240 × 55 mm (at 22 mm thickness) / 100 mm (at 60 mm thickness) Edge thickness min.: 0.3 mm (coil material) / 0.4 mm (strip material) Edge thickness max.: 3 mm (coil material) / 20 mm (strip material) Feed speed: steplessly adjustable 18–25 m/min (frequency controlled) Type of glue: EVA hot-melt adhesive Glue application (tank / cartridge / nozzle): melting unit with granulate hopper Glue volume / cartridge size: granulate hopper, melting capacity 18–35 kg/h, level-regulated Dkodjwx Aaqepfx Afljg Heating-up time: approx. 8–10 min Edge magazine (slots): 2 rolls (automatic roll change) Automatic edge change: yes (automatic via PC22, manually switchable) Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment End trimming: trimming unit HL84, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) Flush trimming: via pre-milling unit, pneumatically adjustable Radius trimming: profile trimming unit FK13, automatic 8-position tool changer (R = 2 mm) Bevel / profile trimming: yes, via FK13 pneumatically adjustable Scraper: integrated in multi-finish unit MN21 Polishing: buffing unit in the finish unit FA11 Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW Workpiece pre-heating: available Separating agent spraying device: top / bottom, type 2929 (F.01) Extraction ports: several Ø 100 mm (individual extraction per aggregate) Control: power control PC22 (industrial PC, woodCommander on Win XP embedded) Operating voltage: 400 V, 50 / 60 Hz CE / Standards: CE-compliant according to EU directive 98/37/EC Dimensions / space required: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor shown in the pictures is not included in the scope of delivery! Availability: short-term Location: Lithuania

Stanje: rabljeno, Leto izdelave: 1985, Working width: 500 mm Cutter block: Strip knife Number of knives: 4 Length of surfacing table: 2700 mm Dkedpfx Aem H Uxrsflsg Surfacing table adjustment: Lever Chip removal display: Scale Adjustable fence angle: Yes Motor power: 4 kW Motor brake: Yes, automatic Machine length: 2800 mm Machine width: 1000 mm Weight: 1050 kg

Leto izdelave: 1990, Stanje: dober (rabljeno), Used side loader Kalmar, Dkedpfxjh Et E No Aflsg The machine has been well maintained. For further details, please refer to the pictures.

Stanje: dober (rabljeno), Leto izdelave: 1990, 4-gredni drobilnik priznanega proizvajalca Untha, tip RS 30. 2 x 7,5 kW. Na drobilniku je bila pred tremi leti obnovljena menjalnik in nameščeni novi rezalni diski. Od takrat skoraj ni bil v uporabi. Stroški popravila so znašali 5.300 €. Dedoxpn Hnjpfx Afljkg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, WEINIG UNIMAT SUPER 4 Planer – German-made – Very good condition – Year of manufacture: 2004 – Operating manual (DTR) TECHNICAL SPECIFICATIONS: Planing width: 150 mm Planing height: 50 mm Spindle diameter: 40 mm Equipped with tooling Adjustable top head Dkjdoin Nrgjpfx Afleg 1) Bottom head: 11 kW, 6000 rpm 2) Top head: 18.5 kW, 7000 rpm 3) Bottom head: 5.5 kW, 6000 rpm Feed motor: 2.2 kW Feed speed adjustable via inverter: 0-18 m/min Feed with cardan shafts Pneumatic hold-down Three hardened steel top feed rollers One rubber top feed roller Ribbed infeed table Infeed table length: 1950 mm Total power: 37 kW Central lubrication Transport dimensions: Length/Width/Height: 320x220x220 cm Weight: ~2700 kg

Leto izdelave: 2010, Stanje: pripravljen za uporabo (rabljen), Electrode force: 100 daN, welding power: 255 kVA, rated output: 80 kVA, with DALEX DRF 5.2 cooling system. Dkodpfx Afeiknv Esljg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: nefunkcionalno, UNTHA RS30 SB-460 Leto izdelave: 2007 Dedpfxexn Iwkj Aflokg Rabljeno - poškodovano Število rotorjev: 4 Prostor za mletje: 460 x 500 mm Nova rezila: 1Z-66, 8Z-66 Moč motorja: 2 x 11 kW, 380 V, 50 Hz Nove odprtine sita: Ø 30 mm Dolžina/Širina/Višina: 1340/1250/1970 mm Teža: ca. 1100 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, dolžina tračnega lista: 5.550 mm, širina tračne žage: 80 mm, vrsta vhodnega toka: trifazni, največja višina reza: 400 mm, širina mize: 1.060 mm, dolžina mize: 800 mm, delovna višina: 400 mm, vhodna napetost: 400 V, - Italijanska izdelava - Ploščata tračna žaga za lamele - Neopremljena z barvo - Zelo dobro stanje - Rabljena žaga Žaga: - Premer koles: 800 mm - Največja širina tračnega lista: 80 mm - Največja višina reza: 400 mm - Glavni motor: 11 kW - Območje hitrosti podajanja: 2–40 m/min - Podajanje z pnevmatskim pritiskom na vodilo - Kovinski drsni vhodni valj - Dolžina tračnega lista: 5550 mm - Doseg traku – korpus: 780 mm - Vijačno napenjanje traku - Dimenzije mizne plošče: 1060 x 800 mm Dkjdow H Rq Hjpfx Aflsg - Nagibna delovna miza do kota: 15° - Premer odsesovalnega nastavka: 120 mm - Sistem vlaženja žage - Nožna zavora - Lita kolesa - Zagon zvezda/trikot - Napajanje: 380 V - Dimenzije (d/š/v): 1600 x 1100 x 2400 mm - Teža: 860 kg Podajalnik: - Kovinski, zobati podajalni valj - Pet stopenj hitrosti podajanja z menjavo jermena - Višina valja: 30 mm - Motor podajanja: 0,75 kW - Pritisk