Generator

AKSA AJD 33 EU | 33 kVA Diesel Notstrom Schallgedämmt | NEU 2024

Stanje: novo, Leto izdelave: 2023, ENERGY T20000 20.00 KVA / 16 KW At 400V: 20.00 KVA /// 16 KW At 230V: 16.00 KVA /// 12.8 KW Weight: 255 KG Dimensions: L = 970 mm, W = 680 mm, H = 955 mm RPM - Speed: 3000 Frequency: 50 Hz Voltage: 230/400 V Current: 32.0A at 400V, 70A at 230V Fuel: PETROL (EURO V) Electric start Engine power HP (KW): 32 (23.8) Cylinders: 2 Cooling system: Air Protection features: Low oil level Speed governor: Mechanical Fuel consumption at 75% load: 9.8 l/h Tank capacity: 65 l Voltage regulation: AVR Voltage accuracy: ± 1% * 2 x CEE socket 32A 3-pole 230V single-phase * 1 x CEE socket 32A 5-pole 400V three-phase * 1 x 12V DC output * Voltage selector switch (400V three-phase or 230V single-phase) * LED multimeter: voltmeter, ammeter, kW meter, frequency meter, and hour meter The generator is mounted on 2 sturdy wheels and 2 support legs, making it movable. The handles are foldable to save space. Emergency generators of the ENERGY Thunder series are not suitable for continuous operation! However, backup power supply can be provided without any problems! ENERGY T20000 Full Service Kit €78.00 incl. 20% * Worldwide shipping including unloading is possible at extra cost Ffjdpfx Asipvhkeflst * An invoice with VAT shown will be issued

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 13.116 h, Max. bar capacity mm 20 Max. Z-axis travel, sliding/fixed headstock mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Swivel angle B-axis degrees 105 Lower turret: Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Back working attachment: Tool stations qty. 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Tool holder diameter mm 25 Sub spindle: Max. spindle bore mm 20 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant unit (basic): Fedswuddvjpfx Afloft Pump pressure bar 3 / 8 Tank capacity l 250 Delivery rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions: Length x width x height mm see installation plan * Weight kg 5,000 * Connected load kW 40 (47 kVA)

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna masa: 565 kg, vrsta goriva: dizel, kapaciteta rezervoarja: 38 l, barva: bež, moč: 12,06 kW (16,40 KM), Izhodni tok: 21 A, izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 11,6 kW (15,77 KM), nazivna (navidezna) moč: 15 kVA, neprekinjena moč: 10,4 kW (14,14 KM), neprekinjena (navidezna) moč: 13 kVA, skupna dolžina: 1.850 mm, skupna širina: 850 mm, skupna višina: 900 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: Perkins, vrsta hlajenja: voda, AKSA AP 15 Perkins PRP Power: 10.4 kW / 13 kVA ESP Power: 11.6 kW / 14.5 kVA Engine: Perkins 403A-15G1 Emission Stage: 2 Speed: 1,500 rpm Mechanical speed governor Operating voltage: 12 V Cooling: Water-cooled Generator: Stamford or equivalent Voltage: 400/231 V Ffedpfx Afswu Dbuelet Voltage regulator: AS540 Control panel: DSE 6120 – automatic emergency power control Battery charger: 5 Ampere Type: Canopy set; weatherproof, soundproofed Emergency stop switch Radiator with mechanical fan Base frame with integrated fuel tank (38 L) and vibration dampers Engine coolant pre-heater Voltage and frequency regulation in accordance with ISO 8528-5 Unit suitable for stationary use only Please note that, according to applicable EU regulations, these generator sets are not approved for mobile use. The gensets are sold as B-grade stock. B-grade means that the generator sets may exhibit visual imperfections such as flash rust or rust on the enclosure. However, these imperfections do not affect the functionality or performance of the units in any way. By accepting this offer, you expressly acknowledge the described characteristics and condition of the units.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 MILLING SPINDLE - Tool holder: HSK63 - Spindle drive power: 17.5 kW - Spindle speed: 18,000 rpm LINEAR AXES - Travel X/Y/Z axes: 915 / 500 / 500 mm - Rapid traverse speed (X/Y/Z): 30 / 30 / 20 m/min TOOL CHANGER - Number of tools in magazine: 28 TABLE - Table size: Ø 630 mm - Max. table load: 500 kg ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power requirement: 26 kVA WEIGHT AND DIMENSIONS - Space requirements: 3620 x 3160 mm - Machine height: 3000 mm - Machine weight: 7,300 kg MACHINE HOURS Fedpfxjup Hw Ee Aflsft - Operating hours: 48,894 h ACCESSORIES - Control: Heidenhain iTNC 530 - Coolant tank - Chip conveyor - Oil mist extractor: ELBARON - Coolant unit: HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe system: Renishaw - Tool breakage monitoring: BLUM

Stanje: novo, Leto izdelave: 2023, Standby power 20 kVA (16 kW) Full load 17.5 kVA (14 kW) Voltage 230/400V Generator output 16 kW Continuous generator output 14 kW Number of phases 3 ECU adjustment Tank capacity 60 l Liquid cooling Frequency 50Hz Speed 1500 rpm Engine type: inline engine, 4-cylinder, naturally aspirated Cylinder bore and stroke 98 x 105 mm Displacement 3.2 liters Oil capacity approx. 3 l (between min./max. on dipstick) Coolant capacity approx. 5 l Diesel fuel Compression ratio 17.2:1 Central controller DATAKOM D300 Insulation class (generator) H Number of windings (generator) 12 Degree of protection (generator) IP23 Shunt excitation type Voltage regulation (alternator) +/- 1% Overall dimensions (L x W x H) 2000 x 900 x 1070 mm Ffsdpfx Afoi Nthqelet Emission standard EURO III Weight 730 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, obratovalne ure: 47.600 h, številka stroja/vozila: 325, Dobro ohranjena Fjdoh Dzqlspfx Afleft

Stanje: novo, Saw blade diameter: 370 mm Cutting range at 90°: round 120 mm Cutting range at 90°: square 100 mm Cutting range at 90°: rectangle 180x100 mm Working height: 925 mm Saw blade speed: 17 – 70 rpm Total power requirement: 3.0 kW Machine weight approx.: t Space requirements approx.: 1.9 x 1.45 x 2.1 m SPECIAL OFFER PRICE!!! High-performance vertical circular saw, hydropneumatic fully automatic (20195) · Mitre cutting: left 60° & right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm gear drive with large gear ratio, integrated in a robust cast housing for optimal cutting results · Vise with double clamping arm for burr-free cuts, additionally with lateral quick-shift for mitre changes · Precision prismatic guideway for gearbox head, laterally adjustable · Particularly robust base frame with built-in cooling system · Large chip drawer · Chip removal brush integrated in the saw blade cover CNC Control: · With control panel for more than 90 different sawing programs with 99 sub-programs for length, quantity, and angle · Automatic feed unit 2,000 mm via ball screw, incremental feed with automatic length compensation. Adjustable for cut lengths from 25 to 9,999 mm. · Fully hydraulic control of saw frame and clamping fixtures · Preselection of 3 different material feed rates · Visualization of the complete work process with simple data input Fedpfx Ajd Iin Eeflsft ATTENTION: Price does not include saw blade! (Saw blade price: €204)

Stanje: novo, Article: Welding Positioner 50 kg Fedpfx Ajbambrofloft Type: KT-50 without chuck Max. load: 50 kg horizontal Max. load: 25 kg vertical Rotational speed: 1–7.5 rpm Rotation direction: left and right Turntable speed: manually adjustable Turntable diameter: 315 mm Turntable height: 375 mm Turntable tilting angle: 0–90° Motor power (operating): 0.08 kW Motor power (standby): N/A Dimensions: 430 x 430 x 375 mm Weight: approx. 38 kg Power supply: AC 110V / 220V 50/60Hz Price does not include quick-release chuck and height-adjustable workbench Surcharge for quick-release chuck: €195 Packaging and shipping within Germany: approx. €80

Stanje: rabljeno, New diesel generator set, power generator, emergency power unit RTE Model 50kVA – identical to DAEWOO DAGFS 50 New, unused, year of manufacture 2025 Rated output: 50 kVA Continuous output: max. 40 kVA Standby power: 55 kVA / 44 kW Rated current: 33 amps Voltage: 400/230 volts, 50 Hz    230 volts, 50 Hz Fuel tank capacity: 99 liters – provides an operating time of up to 8.5 hours at 75% load Fuel consumption at 75% load: approx. 11 liters/hour Fuel consumption in standby: approx. 4 liters/hour Drive engine: 4-cylinder inline diesel engine RICARDO ZH4105ZD Engine power at 1500 rpm: 45 kW Ffedpfx Asxlkq Usflst Engine power at 1800 rpm: 55 kW Displacement: 1500 cc Tank capacity: 99 liters - Simple, compact construction with sound-insulated metal enclosure - Forklift pockets for easy and safe transport by forklift - 3x CEE 16 amp sockets (3-pin, 230 V) - 1x CEE 16 amp socket (5-pin, 400 V) - Terminals for cable power connection for external consumers, e.g. site distribution boxes - ATS module for mains backup operation, enabling automatic emergency power switchover in the event of mains failure Space requirement (L x W x H): 2150 x 950 x 1200 mm Weight: 900 kg Brand new machine from stock

Stanje: rabljeno, Dolžina upogibanja: 3100 mm Tlak: 80 t Ffjdpfxeru Unbs Aflet Moč motorja: 5,5 kW Mehanska zadnja opora