Vertikalni obdelovalni center CNC

Akira Seiki HV-8A

Leto izdelave: 2022, stanje: pripravljen za uporabo (rabljen), A CNC vertical machining center Akira Performa with counter bearing on the A-axis is available. Travel range X/Y/Z: 2060mm/850mm/815mm, spindle-to-table distance: 120mm-935mm, table dimensions X/Y: 2150mm/800mm, max. table load: 3240kg. Spindle power: 42kW, speed: 8000rpm, tool holder: BT50, rapid traverse X/Y/Z: 36m/36m/30m/min, positioning accuracy: 0.015mm, repeatability: +/-0.005mm. Tool magazine: 28 stations, max. tool diameter: 100mm/200mm, max. tool length: 350mm, max. tool weight: 15kg. Machine dimensions X/Y: approx. 5000mm/3550mm, weight: approx. 14500kg, control: Siemens 828. Documentation available. An on-site inspection is possible. Njdpfov Ubqbsx Abijwl

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 mm - Max. machining length: 200 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° - Number of toolholders: 2 TOOLHOLDER 1 - Number of stations: 5 Nwedpouha Ugsfx Abiol TOOLHOLDER 2 - Number of stations: 5 - Number of driven stations: 4 - Driven tool speed: 8,000 rpm FRONT TOOL POST - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 6,000 rpm BACK MACHINING - Number of stations: 7 - Number of driven stations: 3 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 14 kW WEIGHT AND DIMENSIONS - Floor space required: 2270 x 1650 mm - Machine height: 2200 mm - Machine weight: 3,500 kg MACHINE HOURS - Operating hours: 80,490 h EQUIPMENT - Control system: Fanuc - Driven tool motorization at: S2, S3, S5, S6 - Driven guide bushing - Parts catcher - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: ROBOBAR SBF 532 - Oil mist extraction - Coolant reservoir

Stanje: rabljeno, TECHNICAL DATA Nedeuhax Eepfx Abiewl - Number of Axes: 10 - Number of Spindles: 2 MAIN SPINDLE - Max. Bar Diameter: 32 mm - Travel Path: 240 mm - Spindle Speed: 8,000 rpm - Spindle Drive Power: 7.5 kW - Minimum C-Axis Resolution: 0.1° SUB SPINDLE - Max. Bar Diameter: 32 mm - Spindle Speed: 6,000 rpm BUSH HOLDER 1 - Number of Positions: 5 BUSH HOLDER 2 - Number of Positions: 5 - Number of Powered Positions: 4 - Driven Tool Speed: 6,000 rpm FRONT TOOL POST - Number of Positions: 4 - Number of Powered Positions: 4 - Driven Tool Speed: 6,000 rpm BACK WORKING STATION - Number of Positions: 7 - Number of Powered Positions: 3 - Driven Tool Speed: 6,000 rpm ELECTRICAL SUPPLY - Supply Voltage: 400 V MACHINE HOURS - Operating Hours: 56,433 h ACCESSORIES - Control System: Fanuc - Tool Drive Motorization at: S2, S3, S5 V+H - Driven guide bushing - Parts removal - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Number of driven tool holders: 3 - Number of fixed tool holders: 7

Stanje: rabljeno, Leto izdelave: 1991, Drilling capacity in steel (diameter): 50 mm Throat depth: 1100 mm Max. workpiece height: approx. 1000 mm Drilling capacity in cast iron: 60 mm Spindle taper: MT 5 Spindle speeds: 28 - 2500 rpm Feeds: 0.05 - 2 mm/rev Quill travel: 300 mm Distance base plate to spindle nose: 630 - 1380 mm Vertical arm adjustment: 750 mm Total power requirement: 6 kW Machine weight: approx. 4 t Machine dimensions (L x W x H): 2,740 x 1,140 x 2,590 mm - with tapping device - Accessories: cube table (L x W x H = 550 x 550 x 550 mm), machine vice, coolant system Nsdpeu Sblwsfx Abiswl

Stanje: rabljeno, Leto izdelave: 1973, Spindle diameter: 130 mm X travel: 3,000 mm Y travel: 2,000 mm Total power requirement: 4.5 kW Machine weight approx.: 30 t Boring spindle diameter: 130 mm Spindle taper: SK 50 Working area: X – Column longitudinal travel: 3,000 mm Y – Spindle housing vertical travel: 2,000 mm Z – Spindle stroke: 1,000 mm Table size (lower): 3,300 x 2,400 mm Load capacity per m²: 10 t/m² Mounted table approx.: xx,000 mm Min./Max. position of working spindle above table: 770 / 2,770 mm Feed rate: 0.9 – 2,000 mm/min Nodpst Hwt Ssfx Abiowl Rapid traverse for spindle headstock and column: 5,000 mm Quill feed: 0.5 – 1,200 mm/min Spindle speed range, partially infinitely variable: 4.5 – 1,250 rpm Machine weight: approx. 30,000 kg Accessories / Special equipment: • Heidenhain 3-axis digital readout, hardened guideways, ball screws • Infinitely variable spindle speeds and feeds, individually motorized feed drives • Operator’s traveling platform, pendulum panel control, manual hand panel, platform • Hydrostatic column displacement • Planed clamping plate 3,200 x 2,500 mm with T-slots, auxiliary table approx. 1,400 x 2,600 x 900 mm (H), one side face machined • Hydraulic clamping for column/carriage, motorized tool clamping • Extensive accessories including tool holders with and without tools • Separate chip extraction system, clamping aids, 1 clamping angle plate and plates, and much more

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.500 mm, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 20 obr/min, širina mize: 1.000 mm, dolžina mize: 4.200 mm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! TECHNICAL MAIN DATA Year of manufacture: 2007 Capacities / Travels: Longitudinal (X): 4,000 mm Transversal (Y): 1,200 mm Vertical (Z): 1,500 mm Table size: Length: 4,200 mm Width: 1,000 mm T-slot width: H9 Reference slot: H7 Paint finish: RAL 5010 and RAL 9002 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 30 kW Spindle speed range: Spindle speed: 20–3,000 rpm Nodey T Elljpfx Abijwl Feed rates: X, Y, and Z axes: 2 – 12,000 mm/min Max. rapid traverse speed: X, Y, and Z axes: 15,000 mm/min Weight: approx. 22,000 kg HEIDENHAIN iTNC 530 Automatic MTE Diagonal Milling Head Coolant system RepairFIT is our proven offering for a profitable entry into our product lines. Machines available in this line are sourced through a strict selection process and subjected to a thorough inspection (Deep-Dive-Check) by our team. After intensive cleaning, any obvious defects and faults detected are professionally rectified by our expert service team.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.400 mm, dolžina pomika po osi Y: 630 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 1.800 mm, pomik osi Y: 1.800 mm, pomik po osi Z: 450 mm, največja hitrost vretena: 1.800 obr/min, hitrost vretena (min.): 1.800 obr/min, hod vretena: 100 mm, hitro pomikanje X-os: 4 m/min, hitri pomik os Y: 4 m/min, hitri pomik na osi Z: 1 m/min, skupna višina: 2.500 mm, skupna širina: 3.350 mm, skupna dolžina: 3.060 mm, širina mize: 630 mm, dolžina mize: 1.800 mm, položaj glave za glodanje: VERTIKÁLNÍ/HORIZONTÁLNÍ, vrsta vhodnega toka: trifazni, obremenitev mize: 1.500 kg, skupna masa: 6.500 kg, FGS 50/63 - TOS KUŘIM Konzolna rezkalnica Rezkanje v horizontalni/vertikalni osi Nova električna omarica + upravljalna plošča Digitalno merjenje osi Generalno obnovljeno leta 2025 Garancija: 12 mesecev Dobavljivo: TAKOJ NA VOLJO STANJE NOVEGA STROJA – GENERALNA OBNOVA Nodpfx Absxpugneiewl GEOMETRIJSKA NATANČNOST PO PROIZVAJALCU FGS 50/63 – Tehnični podatki: Osnovni podatki stroja: Proizvajalec: TOS Kuřim Skupna dolžina: 3 060 mm Skupna širina: 3 350 mm Skupna višina: 2 500 mm Skupna teža: 6 500 kg Skupna priključna moč: 23 kVA Delovno območje: Vzdolžni pomik os X: 1 400 mm Prečni pomik os Y: 630 mm Navpični pomik os Z: 500 mm Delovno vreteno: Stožec vretena: ISO 50 Število stopenj / območje vrtljajev: 18 / 35,5 – 1 800 min⁻¹ Moč motorja vretena: 15 kW Maks. navor na vretenu: 2 500 Nm Območje podaj X – Y / Z: Število stopenj / območje: 16/ 10 – 1 800/ 2,5 – 450 mm/min Hitro pomikanje: 4 000/1 000 mm/min Mize: Površina mize (širina x dolžina): 630 x 1 800 mm Maks. obremenitev mize (v osi): 1 500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 3.000 h, potovalna razdalja osi X: 6.100 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 950 mm, CNC Portalna rezkalna stroj – popolnoma obnovljen s strani REM (2021) Zmogljiv in vsestransko uporaben težki rezkalni stroj, ki so ga REM-jevi strokovnjaki v letu 2021 v celoti posodobili z najnovejšo krmilno enoto Heidenhain TNC 320. Pripravljen za takojšnjo uporabo v proizvodnji. GLAVNE TEHNIČNE SPECIFIKACIJE: • X-os (prečni pomik): 6.000 mm • Y-os (vertikalni pomik glave): 2.000 mm • Z-os (osni pomik sani): 950 mm Nwedpfxon D N H Tj Abiol • Dvojna vretena | Rotacija glave: 360° • Hitrost vretena: 1.000 – 4.000 min⁻¹ • Konus vretena: ISO 50 (samodejno zaklepanje/odklepanje) • Dimenzije glave: 290 × 290 mm • Moč motorja vretena: 15 kW (DC) • Teža stroja: pribl. 32 t • CNC krmilje: Heidenhain TNC 320 ZAKAJ IZBRATI REM? ✔ Stroj v celoti pregledan in preizkušen v delovnem stanju ✔ Sodobna CNC nadgradnja – nova električna napeljava, novi pogoni ✔ Na voljo dokumentacija in tehnična podpora ✔ Izvoz po vsem svetu | Konkurenčne cene pošiljanja Idealno za obdelavo težkih komponent v letalski, energetski in težki industriji. Kontaktirajte nas za popolne tehnične podatke, fotografije in video predstavitev.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, potovalna razdalja osi X: 5.000 mm, pomik osi Y: 3.500 mm, pomik po osi Z: 2.350 mm, hitrost pomika os X: 13.000 m/min, hitrost podajanja osi Y: 13.000 m/min, hitrost podajanja os Z: 13.000 m/min, skupna dolžina: 12.000 mm, skupna višina: 4.800 mm, širina mize: 2.000 mm, skupna širina: 6.800 mm, dolžina mize: 2.500 mm, zmogljivost vrtanja: 180 mm, vrtljajska hitrost (min.): 2.000 obr/min, dolžina pomika os W: 1.000 mm, Table-type Boring Mill Juaristi - TS5 MACH-ID 9610 Manufacturer: Juaristi Model: TS5 Control: HeidenHain iTNC530 Year of manufacture: 2009 Coolant through spindle: 20 bar Paper filter system Tool changer (ATC) with 60 positions Spindle extension: L = 550 mm Full B-axis 360,000° with ROD 880C Table load capacity: 28,000 kg X-axis travel: 5,000 mm Y-axis travel: 3,500 mm Z-axis travel: 2,350 mm W-axis travel: 1,000 mm Table length: 2,500 mm Table width: 2,000 mm Table load: 28,000 kg Spindle speed: 2,000 rpm Power: 51 kW Tool holder: 180 ISO50 ISO/BT/MK Feed rate X-axis: 13,000 mm/min Nodpoy Hq Dysfx Abiowl Feed rate Y-axis: 13,000 mm/min Feed rate Z-axis: 13,000 mm/min Feed rate W-axis: 13,000 mm/min Tool changer: 60 positions ICS (internal coolant supply): 20 bar Number of controlled axes: 5 Length: 12,000 mm Width: 6,800 mm Height: 4,800 mm Weight: 44,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are implied. We recommend that you verify all critical details.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, skupna dolžina: 9.800 mm, skupna širina: 4.000 mm, dolžina podajanja os X: 3.500 mm, dolžina pomika po osi Y: 1.100 mm, dolžina podajanja os Z: 1.100 mm, hitrost pomika os X: 30.000 m/min, hitrost podajanja os Z: 5.000 m/min, dolžina mize: 3.000 mm, obremenitev mize: 6.000 kg, širina mize: 1.200 mm, moč: 22 kW (29,91 KM), Machine de rectification plane Ziersch - Z1030 MACH-ID 9597 Fabricant : Ziersch Modèle : Z1030 Commande : Mitsubishi Touch Année de fabrication : 2018 Déplacement axe X : 3500 mm Déplacement axe Y : 1100 mm Déplacement axe Z : 1100 mm Longueur de la table : 3000 mm Largeur de la table : 1200 mm Capacité de charge de la table : 6000 kg Avance axe X : 30000 mm/min Avance axe Z : 5000 mm/min Dimensions de la meule : 500 x 100 x 203 mm Puissance : 22 kW Vitesse : 3000 tr/min Système de refroidissement : oui Avance axe Y : 3000 mm/min Longueur : 9800 mm Largeur : 4000 mm Hauteur : 4500 mm Poids : 27500 kg Nwedpfx Abjy En Dnsiel Veuillez noter : Les informations présentées sur cette page ont été fournies au mieux de nos connaissances et, lorsque possible, obtenues auprès du fabricant. Elles sont communiquées de bonne foi, mais leur exactitude ne peut être garantie. Par conséquent, ces informations ne constituent ni une représentation ni des conditions contractuelles. Nous vous recommandons de vérifier tous les détails importants.