Stružnica - ciklično krmiljena

AJAX APOLLO 200

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, RANDEK forgó keresztvágó fűrész Hnodsvryhgepfx Abxen

Stanje: rabljeno, CNC Cycle-Controlled Lathe HARRISON Type Alpha 400 Plus Machine No.: P30180/150 Year of manufacture: 1998 Centre distance: 1250 mm Swing over bed: 400 mm Centre height: 200 mm Swing over cross slide: 245 mm Max. workpiece diameter in bed gap: 585 mm Bed width: 313 mm Cross slide travel (X-axis): 250 mm Tailstock quill diameter: 73 mm Tailstock quill stroke: 140 mm Tailstock taper: MT 5 Spindle bore: 54 mm Spindle nose: Camlock D1 size 6 Spindle speed: 20-2500 rpm Spindle speed ranges: - Range 1: 15-275 rpm - Range 2: 35-795 rpm - Range 3: 110-2500 rpm Feed rate X and Z: 0.03-0.6 mm/rev Rapid traverse X-axis: max. 2000 mm/min Rapid traverse Z-axis: max. 4000 mm/min Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power: 7.5 kW Electrical connection: 400 Volt, 50 Hz, 23.5 kVA - Cycle control: Harrison Alpha / GE FANUC – operating language in French (France) - Automatic 3-stage gearbox (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with selectable graduation (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm, type CSN, 1 set soft top jaws - Quick-change tool post MULTIFIX size B with 2 tool holders - 1 revolving centre - 1 quick-action drill chuck RÖHM, 3-16 mm Hnsdpfx Ash Hvk Aobxen - Foldable chuck guard - Hinged work area safety doors - Chip tray with coolant system under machine bed - Switch cabinet fixed to the machine - RS 232 interface Floor space (L x W x H): 2600 x 1450 x 1550 mm Weight: 1950 kg In good condition

Stanje: rabljeno, Brand: GEMINIS Model: CNC 4 PLUS 620 x 2000 Control: FAGOR Distance between centers: 2000 mm Center height: 315 mm Maximum turning diameter: 620 mm Swing over cross slide: 370 mm Bar capacity: 80 mm Precision swiveling turret: 1st speed range: 0 to 355 rpm Hjdpfx Abowznp Nexjnn 2nd speed range: 0 to 1800 rpm Tailstock: Morse taper 6 Main motor: 15 kW Maximum workpiece weight between centers: 2,560 kg Machine dimensions (L x W x H): 4300 x 1900 x 1800 mm

Leto izdelave: 1980, stanje: dober (rabljeno), A very well-preserved, cycle-controlled lathe from Weisser Heilbronn equipped with SIEMENS control system. Centre distance: 2000 mm Centre height: 295 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Swing diameter in the gap: 800 mm Total length of gap: 375 mm Bed width: 450 mm Travel X-axis: 350 mm Travel Z-axis: 1850 mm Spindle nose according to DIN 55022: Size 8 Number of spindle speeds: 18, range 14 – 1400 rpm Spindle bore: 71.5 mm Front bearing diameter: 110 mm Feed range: 0.01 – 40.95 mm/rev Rapid traverse: 8 m/min DC drive: 15 kW, 400V, 50Hz Max. allowable torque at the spindle: 2500 Nm Tailstock quill diameter: 80 mm Quill stroke: 250 mm Quill taper: MK 5 Length x width x height Machine weight: 5500 kg Accessories: — Tailstock — Pneumatic 3-jaw chuck with exchangeable jaws, 315 mm — "MULTIFIX" quick-change tool post in front of the centre, size "C" Hnjdpfx Absgyy I Ajxen — 4-position turret behind the centre — Tool holder — Coolant system — Follow rest, pneumatically operated Technical data and dimensions subject to change and errors. Video conference via WhatsApp possible by appointment.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, FAMUP MCP 45 CNC Machining Centre TECHNICAL DATA Axes Number of axes: 3 X-axis: 450 mm Y-axis: 300 mm Z-axis: 400 mm Feed Rates Working feed X, Y, Z: 10,000 mm/min Hnodpfx Aoq U Rm Hobxen Rapid traverse X, Y, Z: 30,000 mm/min Working thrust X, Y: 2,000 N Working thrust Z: 3,300 N Pallet Dimensions: 400 x 300 mm Number of T-slots: 2 T-slot width: 14 mm T-slot spacing: 80 mm Max. table load: 100 kg Changeover time: 9 sec. Spindle Spindle motor power: 5 kW Speed: 10,000 rpm Tool Changer Magazine capacity: 16 Max. tool diameter: 63 mm Max. tool length: 150 mm Max. tool weight: 4 kg Tool change time: 1.7 sec Weight: Approx. 3,000 kg No liability is assumed for the correctness, completeness, or accuracy of the above information.

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), Na voljo je komorni peč z recirkulacijo zraka Nabertherm. Priključna moč: 30kW, največja temperatura: 650°C, prostornina: 500l, čas ogrevanja: pribl. 60min, notranje dimenzije X/Y/Z: 750mm/1000mm/750mm. Dimenzije stroja: pribl. 1300mm/1900mm/1850mm, teža: pribl. 750kg. Dokumentacija na voljo. Možen je ogled na lokaciji. Hnodoxrf Iuepfx Abxsn

Stanje: rabljeno, Double-column hydraulic press SMG Type HBP 200 - 2000 / 2000 Serial No. 7.4117 Year of manufacture 1986 - rebuilt in 2000 Pressing force: 200 tons Frame opening (front): 2050 mm Frame passage (side): 2030 mm Table size: 2800 x 2000 mm Ram area: 2000 x 2000 mm Ram stroke: 700 mm Maximum installation height: 1850 mm Table height above floor: 750 mm Ram return force: 33 tons Rapid approach speed: 500 mm/s Pressing speed: 72/36 mm/s Return speed: 420 mm/s Hnedjdzp Tcepfx Abxjn Safety distance: 230 mm Main motor power: 75 kW Control pump motor power: 11 kW Mains connection: 380 Volt, 50 Hz - 8-way flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in upper dead center - Position measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS PLC S7 - Free-standing control cabinet - 2-hand control panel, free-standing - Floor-level installation - Central lubrication - Operating manual with circuit diagrams Space required for press (upright), L x W x H: 3700 x 2900 x 5900 mm Overall machine height with motor: 5900 mm Space required for horizontal transport, L x W x H: 5900 x 3250 x 2950 mm Weight: 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000 onwards, the machine was used as a try-out press in a toolmaking facility. Good condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Universal tool milling machine with gear transmission, travel distances X/Y/Z - 500/350/400 mm, rectangular table 800x400 mm, tilting and swiveling table 600x300 mm, 3 kW motor, 18 speeds 40-2000 rpm, ISO 40, quill stroke 60 mm, drilling capacity Ø 40 mm, automatic feeds and rapid traverse, left/right switch, 3-axis digital readout, horizontal milling head, coolant system, halogen machine lamp, rotary/tilting table, dimensions 1500x1700x1750 mm, approx. 2200 kg Hnedpsfvci Eofx Abxsn

Leto izdelave: 2001, stanje: dober (rabljeno), Universal CNC cycle lathe by Pinacho, suitable for tooling, fixture construction, training, and mold making. Swing diameter: 360 mm Control unit: Fagor 8055 Technical Specifications: - Swing diameter: 360 mm - Distance between centers: 1000 mm Hsdjfglzgopfx Abxjnn - Control: Fagor 8055 - Tailstock: Morse taper 3 - Tool turret: Barufaldi, 6-position - Spindle speed: 1–4000 rpm - Electrical connection: 380 V, 5.5 kW Contact: AWM GmbH Mr. Mario Wurm

Stanje: rabljeno, x-travel 500 mm y-travel 400 mm z-travel 400 mm O F F E R We can offer you, subject to prior sale and errors excepted, the following from stock on a non-binding basis: DECKEL MAHO CNC Universal Milling Machine Type: DMU 50 M Year of manufacture: 1998 _____ Working area: - Travel X-axis: 500 mm - Vertical travel Z-axis: 400 mm Hsdpfxev Td Ele Abxjnn - Cross travel Y-axis: 400 mm - C-axis – table rotation, manual: 360° - B-axis – table tilting, manual: ° Table size: Ø 700 x 500 mm Table tilting range: ° Table rotatability: 360° Max. workpiece weight: 200 kg Distance between table and spindle approx.: 550 mm Reach between machine and spindle min/max: 2 – 6 mm Tool holder: SK 40 Spindle speeds steplessly programmable: 20 – 4,500 rpm Feed rates / rapid traverse max.: 5,000 mm/min AC main drive 0%/40% duty cycle approx.: 9 / 13 kW Total power approx.: 15 kW - 400 V - 50 Hz Weight approx.: 3,000 kg Accessories / Special equipment • 3-axis path control HEIDENHAIN TNC 124 with display and direct input of all data, including electronic handwheels for all 3 axes. • All 3 axes in the milling head, allowing “irregular” workpieces to be machined on the stationary table. • Rotary table, 360° manually rotatable, +/-° manually tiltable (each with clamping). Digital display of tilt angles integrated into the control. • Simple coolant system, attached control cabinet (SIEMENS equipment). • Pneumatic tool clamping, various tool holders, operating manuals, CE certificate, etc. Condition: Good to very good! Ideal for training or single-part production! Click here for a video of the machine: Delivery: Ex stock, immediately available, FCA Metzingen Payment: Net - upon receipt of invoice Always a large selection of milling machines in stock – please let us know your requirements!