Obrat za prašno lakiranje platišč

ab 13.990 EUR - Romer Mietkauf / Leasing

Stanje: novo, Leto izdelave: 2025, KOMPAKTNA RAZTEGLJIVA KOMORA ZA PRŠENJE TEKOČIN Raztegljive komore za pršenje so zasnovane za ročno nanašanje barve s stranskim izsesavanjem, namenjene izločanju razpršene tekoče barve. Prednost raztegljivih komor je prihranek prostora v delavnici. KONSTRUKCIJA Izdelana je iz škarjastega sistema karoserije, sestavljenega iz elektrogalvaniziranih pravokotnih in okroglih cevi, zunaj pa je prekrita s PVC platnom. Gibljivi sistem vključuje industrijska kolesa ali vodila z drsnimi kolesi; izbira je odvisna od tega, ali je uporaba zunanja ali notranja ter od dolžine komore. Vrata so zasnovana kot zavesa, ki se zapre med samim nanosom barve. SISTEM VENTILACIJE Stransko izsesavanje zagotavlja visoko učinkovitost med nanosom barve. Filtrirna stena je modularne izvedbe iz pocinkane pločevine, z integriranimi policami ter zasilnimi vrati na obeh straneh. Izsesovalni ventilator je nameščen na vrhu filtrirne stene, električni motor ventilatorja pa je zunaj zračnega kanala, kar preprečuje stik motorja z onesnaženim zrakom in s tem zmanjša tveganje za iskre. SISTEM FILTRACIJE Izsesovalni filter je dvostopenjski in zagotavlja 99,9 % učinkovitost; nameščen je na stranski filtrirni steni komore. Pred-filter se nahaja pri vratih v obliki zavese, ta zagotavlja naravni pretok zraka med delovanjem izsesovalnega ventilatorja. Kontrolna plošča ima opozorilno luč, ki vas opozori na potrebno servisiranje ob zamašitvi filtrov. Izdelano v Turčiji CE oznaka Ponujamo najboljše tehnične rešitve in konkurenčne cene! * Pisarna v Franciji in Nemčiji. Hnsdpfevxfkaex Adkoi Kontaktirajte nas za več informacij in ponudbo.

Stanje: rabljeno, CNC oxy-fuel cutting system BACH type ACW 2500 Oxy-fuel cutting machine with NBS 400 CNC control Machine no. 14 561-06 Year of manufacture: 2006 Cutting area: 2500 x 6500 mm Hnjdpfx Aof Ncadedkei Track length: 8000 mm Gauge width: 3345 mm Track height: 650 mm 2x machine cutting torches with cutting table

Stanje: dober (rabljeno), Leto izdelave: 1985, Megamat Vertical Carousel Type: 130-225-42 Device No.: 4492 Year of manufacture: 1985 Device height: approx. 5410 mm Device width: approx. 2670 mm Device depth: approx. 1300 mm + 300 mm tabletop Number of trays: 42 Tray width: approx. 2155 mm Tray depth: approx. 410 mm Tray height: approx. 200 mm Compartment load: 100 kg Total load: 4,200 kg Hnodpfjvc Hk Nsx Adkoi Colour: beige/green

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 20.233 h, Uporabljen Tetra Pak Cap Applicator 30/Flex za Helicap23 2012 Tetra Pak Cap Applicator 30/Flex za Helicap23 je avtomat za zapiranje plastenk, ki ga je leta 2012 izdelalo podjetje Tetra Pak®. Naprava je posebej zasnovana za nanašanje plastičnih navojnih pokrovčkov na embalažo in zagotavlja varno zapiranje ter učinkovito proizvodnjo. S kapaciteto 9.600 steklenic na uro (BPH) ponuja visoko zmogljivo rešitev za embalažno industrijo. Tehnične specifikacije: - Proizvajalec: Tetra Pak® - Model: 30 Flex for Helicap 23 - Leto izdelave: 2012 - Zmogljivost: 9.600 BPH Stroj je primeren za 1000 slim format. Hodsvgufpepfx Adksni Tip pokrovčka in smer vrtenja: Avtomat za zapiranje je združljiv s plastičnimi navojnimi pokrovčki, ki zagotavljajo zanesljivo zapiranje. Smer vrtenja je v smeri urinega kazalca, kar omogoča pravilno nameščanje pokrovčkov na embalažo. Trenutno stanje in varnostne značilnosti: Trenutno je Tetra Pak Cap Applicator 30/Flex za Helicap23 v skladišču. Opremljen je z varnostnimi funkcijami, ki ščitijo operaterje in zagotavljajo varno delovno okolje. Navodila in delovne ure: K stroju so priložena vsa potrebna navodila za upravljanje, vzdrževanje ter odpravo napak. Ti viri omogočajo učinkovito uporabo in vzdrževanje stroja. Stroj je bil do zdaj v uporabi približno 20.233 ur. Električni podatki: Napajanje stroja je V: 400, kW: 6,7 ter frekvenca 60 Hz, kar zagotavlja optimalno delovanje in porabo energije v predpisanih mejah. Zaključek Tetra Pak Cap Applicator 30/Flex za Helicap23 je zanesljiv avtomat za zapiranje, izdelan leta 2012. Z zmogljivostjo nanašanja plastičnih navojnih pokrovčkov s hitrostjo 9.600 BPH je odlična rešitev za učinkovite procese pakiranja. Opremljen z varnostnimi funkcijami in priloženimi navodili je ta avtomat zasnovan za varno zapiranje in konstantno delovanje ter predstavlja dodano vrednost embalažni industriji.

Stanje: novo, Leto izdelave: 2025, The Automatic Basket Cleaning System XTON Smart Cleaner SC1000™ is constructed from stainless steel AISI 304 and acid-resistant stainless steel AISI 316. It is designed for use in various industrial sectors and the automotive industry. The cleaning system is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned components. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner BA fluid, which, in combination with optimal temperature and pressure, effortlessly removes all types of contamination. The system operates in a closed loop at temperatures of up to 80°C. Standard equipment includes a rotating basket with a diameter of 100 cm and a 300-liter tank, which can be optionally thermally insulated to prevent rapid cooling of the cleaning fluid. The Smart Cleaner SC1000™ delivers high cleaning quality, time and energy savings, and safe, user-friendly operation. The cleaning system is designed for the automatic removal of contaminants from surfaces made of cast iron, aluminum, and steel. The design and construction of the Smart Cleaner SC1000™ meet the highest quality standards ISO 9001 and environmental standards ISO 14001. FEATURES: - Rotating basket with a diameter of 100 cm - Heated tank with a capacity of 300 liters - Dual liquid filtration system - Sensors for liquid level and temperature - Oil separator - Height-adjustable feet (up to 100 mm) - XTON Active Cleaner BA (5-liter starter pack) TECHNICAL DATA: - Weight: 200 kg - External dimensions – open chamber (W x D x H): 150 x 120 x 250 cm - External dimensions – closed chamber (W x D x H): 150 x 120 x 140 cm - Diameter of rotating basket: 100 cm - Load capacity of rotating basket: 300 kg - Adjustable working time: 0 – 99 min - Washing/fluid temperature: up to 80°C - Heating power: 9 kW - Tank volume: 300 L - Tank volume up to oil separator: 200 L - Pump capacity: 250 L/min Hnedpfxou R Urho Adkji - Spray pressure: 4.5 – 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency stop switch, limit switch - Protection rating: IP 54 - Declaration of conformity: CE

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Hsdpfx Adjd Ixadokeni Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, delovna širina: 1.100 mm, skupna masa: 1.300 kg, širina obdelovanca (maks.): 600 mm, priključek za stisnjen zrak: 6 letvica, najv. debelina pločevine: 40 mm, število prejšnjih lastnikov: 1, vrsta nastavitve višine: električni, dolžina mize: 3.000 mm, višina mize: 850 mm, širina mize: 600 mm, trajanje garancije: 3 meseci, Mode of operation: dry Application description: Deburring of steel and stainless steel components Year of manufacture: 2007 Standards: CE, EC Machinery Directive 98/37/EC, VDE Units of measurement: mm, bar Operating instructions: 1x manual Paintwork: RAL 9002 white (textured), outfeed table RAL 5010 gentian blue Planetary head station with 3 units: Planetary head design, each with 6 tools, drive power 1.3 kW per unit; speed frequency-controlled 100–300 rpm, disc station with electric height adjustment. Technical data: Working width: 1100 mm Table height adjustment: 0.55 kW Planetary head adjustment drive: 0.18 kW Feed drive: 1.3 kW (Lenze Motec) Conveyor belt dimensions: 1100 x 3000 mm (highly wear-resistant design) Workpiece thickness: 0.8 – 40 mm Constant working height: 850 mm Compressed air connection: 6–7 bar Operating voltage: 3x400 Volt/N/PE/50 Hz Control voltage: 24 Volt DC Infinitely variable feed 0.5–5 m/min, frequency-controlled, automatic workpiece thickness adjustment with start-up switch (Joucomatic), 400 mm outfeed table with integrated brush for conveyor belt drive 0.25 kW, DC brake Height adjustment gearbox, vacuum blower, unit locking, belts replaced – machine is fully operational and in very good technical condition. Set according to manufacturer’s specifications/standards. Sale includes a mechanical functional warranty of 3 months from delivery. Hjdpfx Aew U A Dmedkjni

Leto izdelave: 2002, stanje: rabljeno, Pressure: 63 t Reach: 315 mm Stroke: 8–100 mm Stroke rate: 140 strokes/min Ram adjustment: 63 mm Table surface: 1200 x 630 mm Ram surface: 800 x 315 mm Hnsdpelp U D Tofx Adkoi Through hole in table: Ø 110 mm Table height: 820 mm Ram bore: Ø 50 mm Installation height: 335 mm Total power requirement: 7.5 kW Machine weight: approx. 5 t Pneumatic clutch-brake combination Centralized oil lubrication Hydraulic overload protection Manual stroke adjustment Manual ram adjustment Two-hand operation Foot control Roller block strips in table Hydraulic clamp on the ram Counterbalance cylinder Approved for manual loading operations

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Ficep 1201 DE 601 Excalibur drilling machine for processing flat steel and profiles, featuring a longitudinally moving drilling unit. This machine has been fully cleaned and inspected. The drilling machine is equipped with a numerically controlled, longitudinally moving drilling unit (X-axis), range 0 - 15,000 mm, and an automatic tool changer with HSK A80 holder for 6 tool positions. With its 19 kW drilling spindle drive, this machine is suitable for use with carbide drilling tools. Technical details: Profile and flat steel support with guide rail and fixed table Total length: 15 m Mobile drilling unit for longitudinal positioning on workpieces Horizontal drilling head with one drilling spindle Additional tool storage in X-axis direction Clamping device for securing material Position detection device Hsdpfx Adev Iamzsksni Max. profile size: 1200 x 1200 mm Number of drilling spindles: 1 pc. Drilling diameter: 5 - 40 mm Thread cutting: M6 - M30 Drilling spindle speed: 180 - 3000 rpm Holder: HSK A 80 Tool changer: 1 x 6 For more information, please contact us.

Stanje: dober (rabljeno), Automatic drawer warehouses are the ideal system for vertical storage of bars and steel profiles with lengths of 3 m, 6 m, and 12 m, as well as heavy accessories, semi-finished products, components, molds, and long materials in general. The load capacity per storage unit ranges from a minimum of 5,000 kg to a maximum of 6,000 kg. Hnedpfx Adovvlntsksi