Štiristranski skobeljnik

A.Costa EURO K23

Stanje: rabljeno, A.COSTA LEOPARD večlistna krožna žaga z dvojnim vretenom - Največja globina reza: 200 mm - Širina podajalne mize: 350 mm Nodpfxevf Dagj Adyswb - 2 x 55 kW / 75 KM - Teža: približno 5 ton

Leto izdelave: 2009, obratovalne ure: 214 h, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Thin-cutting frame saw DSG Sonic – Wintersteiger AG Model / Type: DSG Sonic Year of manufacture: 2009 Technical condition: EXCELLENT, only 214 operating hours Technical specifications: DSG Sonic – technical data (Wintersteiger) 🔹 Cutting and block parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Number of frame strokes: approx. 550/min Cutting heights with different blade lengths: Blade length 380 mm → cutting height: 30–88 mm (with Air Jet and magazine), 45–88 mm (with twin planer) Blade length 420 mm → cutting height: 30–128 mm, 45–128 mm Blade length 500 mm → cutting height: 80–210 mm, 45–210 mm Blade length 550 mm → cutting height: 80–254 mm, 45–254 mm Block lengths: For standard machine: +185 mm With magazine: 250–1700 mm Nwsdpfx Adew Dp Ufjyob With twin planer: +250 mm Block height difference: ±0.5 mm Cutting width with side fence: 140 mm 🔹 Additional technical data: Cutting width with middle fence: 2 × up to 60 mm Optional channel width: 2–4 × 15–60 mm Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm Material loss when cutting (kerf thickness): from 0.9 mm Saw blade life (depending on wood type): ~40 hours Machine weight: - Basic version: 3,000 kg 🔉 Noise levels (hearing protection required): At the machine (1 m): - Idle run: 97 dB(A) - Cutting: 99 dB(A) At operator workstation: - Idle run: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and air system: Extraction: - Two connections: Ø 120 mm and Ø 150 mm - Capacity: 3,200 m³/h (30 m/s) Operating air: - Min. 6 bar - Consumption: 200 l/min Lubrication: central, with guide rail monitoring ⚡ Electrical data: - Power supply: L1, L2, L3 + PE - Connecting cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Stanje: rabljeno, Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: KME 2/750L, Clamping carriage for saw frame Nwsdpfx Aov Umb Eedysb Inspection possible by appointment.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Spindle tiltable: No Height adjustment: Handwheel Nwsdpfegzlpkox Adyob Tilting adjustment: - Milling jaw adjustment: manual Height display: mechanical counter Tilt angle display: - Milling fence display: mechanical counter Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Extraction connection: 2 x 120mm Machine length: 2599mm Machine depth: 900mm Weight: 655kg

Stanje: rabljeno, številka stroja/vozila: 006211, Max. panel width: 4300 mm Max. panel length: 2200 mm Nwedpfx Adjiwbfusyob Max. projection of main saw blade: 135 mm Number of clamps: 10 Second flexible pressure beam: yes Rotating station: yes

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (first & second in a machine line) Electronic control system – EasyLing programmer Safety and soundproof enclosure No. 3+3 vertical columns, supporting working units Minimum usable working width (mm): 240 Maximum usable working width (mm): 3100 Minimum usable working thickness (mm): 3 Maximum usable working thickness (mm): 150 Retractable stop cams, spacing (mm): 800 Feed speed (stepless, min/max) (m/min): 4 – 24 Total power output Nwedpfx Aswhmdfedyjb 4 working units (for each side of the machine): - Scoring unit - Automatic scoring unit 1 x 3 kW (RPM 6000) - Planing unit 1 x 6 kW (RPM 6000), 0–10° - Universal milling unit (electropneumatically controlled) 1 x 6 kW (RPM 6000), 0°–90° - Universal milling unit 1 x 6 kW (RPM 6000), 0°–90°

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Celaschi squaring machine Nwjdpjvx Afnofx Adysb 4+4 motors Opening width 3000 mm Option for complete overhaul available

Stanje: novo, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 pcs. Nsdjd Rzc Ropfx Adyowb S&S electrohydraulic frame press machine, Type Super Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment with center pressure beam, slanted window device, counter profiles for single-part production, and much more! Request the complete price list from us! Description: With automatic adjustment for corner joints (tenon and mortise joint, other types of corner joints optional), CE compliant version The only self-adjusting high-performance fully automatic frame press where wooden workpieces do not need to be pre-placed. Width and height adjustment takes place automatically, without any loss of time, immediately after the workpieces are directly placed into the pressing area. No repositioning of the timber is necessary. Base machine with heavy-duty welded frame construction, made of oversized, thick-walled special profiles. Guiding rails of the press corners on the pressure beams in wear-resistant, machined design. Continuous stop side support for width pressing, torsion-resistant, mounted on the base frame. Continuous lower support in extremely heavy-duty, torsion-resistant design, connected with base frame and machine feed. Inserting height 500 mm. All stops are finely adjustable for absolute angular precision and long-term accuracy. Sliding carriage on right side with fast motorized width adjustment with guaranteed parallel movement, including automatic hydraulic locking: Central drive for size adjustment horizontally and vertically, with high infeed and adjustment speed and automatic width and height adjustment (opto-electronic). 2 vertical double-acting pressure cylinders, piston diameter 50 mm, 250 mm cylinder stroke, adjustable pressing force from 400 to 2000 kg. 2 horizontal double-acting pressure cylinders, piston diameter 40 mm, 80 mm cylinder stroke, adjustable pressing force from 250 to 1250 kg. Press corners at upper right, in heavy, milled design, with automatic corner adjustment. Removable press corners Contact surfaces with adhesive-repellent finish. Support and pressure plate depth 100 mm. 8-fold hold and positioning device for absolutely loose placement of all frame parts in the pressing area (no pre-assembly required). Each frame part is held and positioned in two places. Automatic lifting function enables ergonomic placement of the upper cross piece for tall frames at an operator-friendly height. Enhanced work safety due to floor-level operation without ladders or steps. All individual frame components are placed directly in the pressing area. Program selection options: - Manual motorized via push button - Fully automatic via opto-electronic size setting including automatic pressing cycle combined with safety light barrier Automatic, cycle-controlled pressing process via impulse: Vertical pressing – release – horizontal pressing – release – vertical/horizontal pressing Control cabinet is service-friendly, mounted on the left of the base frame. Fast opto-electronic size setting. Compact hydraulic unit adjustable from 20 to 100 bar. Electric hand control, freely programmable for efficient work, especially with large and complex frame structures.

Stanje: rabljeno, No. 3231 Njdpfxowqhwls Adyewb Extraction System with Briquetting Press Spänex SHB 50 Used Complete disposal system for residual materials such as wood, paper, plastic, cotton, etc. The sawdust is transferred directly from the filter unit into the chip bunker of the hydraulic briquetting press. After compression, the briquettes are transported directly to the heating system. Technical data according to manufacturer brochure: Output: 50 kg/h (depending on material) Throughput: 0.45 m3/h Briquette shape: octagonal, 125 x 70 mm Motor power: 5.5 kW Compression ratio: 1:10 Moisture content: min. 8%, max. 20% Sale by customer order, ex location near 69124 Heidelberg, without dismantling, transport, or installation Dismantling, loading, and transport by us available as an option Errors in description and price excepted To avoid any misunderstanding, a viewing on site is possible and recommended by appointment Sale as is Technical specifications, condition description, year of manufacture, and scope of delivery according to manufacturer brochure and/or previous owner, without guarantee Subject to prior sale No warranty is provided for used machines; sale is subject to: “bought as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex location

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Машината е в момента в употреба. Предлагаме демонстрация на живо, разглобяване, товарене, монтаж и обучение на вашия обект. Nwsdpfsv Uab Eox Adyob